SWARNIM JAYANTI MUKHYA MANTRI SHAHERI VIKAS YOJNA (UDP 88 YEAR 2023-24) / SWARNIM JAYANTI MUKHYA MANTRI SHAHERI VIKAS YOJNA (UDP-88 YEAR 2025-26)

NAME OF WORK :-

1 Construction of New Storage Shed for Nagar Palika Use At Najrai Vasahat.

2 Construction of Material Recovery Facility Unit at Solid Waste Management Site at VADALI.

No. Description Quantity RATE Per Amount

1 Construction of New Storage Shed for Nagar Palika Use At Najrai Vasahat.

Excavation for foundation upto 1.5m depth including sorting

out and stacking of useful materials and disposing off the

excavated stuff upto 50Meter lead. (C) Hard Murrum

Excavation for foundation for depth from 1.5m to 3.0m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(C) Hard

Murrum 34.63 287.47 Cu.M.

Providing and laying cement concrete 1:3:6 (1-Cement : 3-

coarse sand : 6-hand broken stone aggregates 40mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth 17.46 3095.25 Cu.M.

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundation & Footing 29.79 4355.12 Cu.M.

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in (C)

Ground Beam & Plinth Beam 22.65 6662.97 Cu.M.

Providing and laying controlled cement concrete M200 and

curing complete including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in Slab

including C.C.Flooring with trimix vaccum dewatering system

including providing and fixing & removing of 'C' chanels

5 having 3'" x 3" as per required level, slope and thickness of

conrete road with surface vibrator and finishing with power

floater & trowel light brooming the surface & including

cutting & filling of expansion joint as directed by Engineer in

Filling available excavated earth (excluding rock) in trenches

plinth, sides of foundations etc. in layers not exceeding 20cm.

In depth consolidating each disposited layer by ramming and

watering. 76.24 136.92 Cu.M.

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

7 6131_paret-II Consentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion with

liter give 1 % concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

Filling in plinth with sand under floors including watering

8 ramming, consolidating and dressing complete

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in ( D )

Column 17.91 7539.65 Cu.M.

Brickwork using common burnt clay building bricks having

crushing strength not less than 35kg./Sq.Cm. in Foundation

and Plinth in Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B)

Conventional 77.29 4214.33 Cu.M.

Providing TMT Bar FE500D reinforcement for R.C.C. work

11 including bending, binding and placing in position complete

upto floor two level 10227.36 77.29 Kg.

Providing 15mm thick cement plaster in single coat on Rough

(Similar) side of single or half brick walls for interior plastering

12 upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement : 3-sand)

20mm thick sand faced cement plaster on walls upto height

10metres above ground level consisting of 12mm thick

13 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to give

14 an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth. 457.78 40.59 Smt.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

15 surface to give an even shade including throughly brushing

the surfce free from mortar droppings and other foreign

matter and sand papered smooth. 457.78 82.97 Smt.

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even shade

16 after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials. etc complete

Providing and fixing rolling shutters of approved make made

of 80 mm wide M.S. laths inter-locked together through their

entire length and jointed together at the ends by end locks

mounted on specially designed pipe shaft with bracket plates,

17 guide channels and arragements for inside and outside

locking with push-pull operation including the cost of hood

cover and spring etc. complete. (B) Shutters having width

Providing and fixing MS Door and Window with Assembly

including Applying priming coat over new steel, Painting two

coats (excluding priming coat) on new steel and Welding

18 using of MS Fram size 50X50X5 middle support of MS Flat

25X3 and MS Door sheet of 1.6mm thick for Door & Windows

as per instruction of engineer in charge.

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat

of red lead paint. (A)In beams and joists, channels angles

19 Tees, flats, with connecting plates or angle cleats as in main

and cross beams. Hip and jack rafters, purlins conneted to

common rafters and the like

Providing and fixing PUF Insulated continueous sandwich

panels for roofs of total thickness not less than 30 mm made

out from continue line method.Panel shall have 0.5 mm thick

pre coated GI sheet on both side of Polyurethane foam with

external face being corrugated in shape for GI and PU foam

both material.The crest height of the panel shall be of 35mm

minimum wiht 250mm c/c pitch. The Precoated sheet shall be

of minimum 240 mpa steel grade confirming to IS 14246:1995

and shall have zinc coating of 120 gsm as per IS:277 , 5-7

20 microns epoxy primer on both side of the sheet and polyester

top coat 15-18 micron.The PPGI Sheet shall have protective

guard film of minimum 25 microns to avoid scratches wihile

trasportation.The roof panels are laid over a frame work of

trusses, columns and purlins fixed using 90mm self drilling

bolt with rubber washer including all types of flashings. PU

Foam must be self-extinguishing, fire retardant type having

minimum density of 40 Kg/Cu.mt.( +, - 2 Kgs) including

0.25mm craft paper edging,self tapping screws of required

length and nos.etc complete as per structural design and

direction of Engineer-in-charge. 545.64 3146.83 Smt.

IP Bullet Camera 4MP , 3.6mm lens :- Supply, Installation,

Testing & Commissioning of IP CAMERA 4 MP @ 30 fps,

3.6mm lens, with POE, IP 66. METAL ( 30 mtr) Bullet,with

color nIght vision without any flash light on device.

Approved Make :

Panasonic/Avigilon/Spy-I/hi-focus 6.00 11811.95 Nos.

ANPR Bullet Camera 4MP, motorized lens ([email protected]):-

Supply, Installation, Testing & Commissioning of IP CAMERA

MP @ 30 fps, with POE, IP 66. METAL ( 30 mtr) Bullet,defog

and ROI coding.built in micro sd slot,enable for making

2 reports in excel format of registered number plate. support

stream,database upto 10,000 plates. Approved Make :

Panasonic/Avigilon/Spy-I/hi-focus

16ch H.265 NVR 2SATA Support with Hard Drive :- Supply,

Installation, Testing & Commissioning of 16ch H.265 NVR

3 2SATA Support with 30 days of recoring Hard Drive.

Approved Make : Panasonic/Avigilon/Spy-I/hi-focus

Accessories Set: Supply, Installation, Testing & Commissioning

4 of required accessoriesincluding junction box, RJ45

24 Port Patch Panel: Supply, Installation, Testing &

5 Commissioning of 24 port fully loaded patch panel with

patching. Approved Make : Netgear/D-Link/Cisco 1.00 4141.00 Nos.

08 Port POE Network Switch :- Supply, Installation, Testing &

Commissioning of Layer 2 networking PoE switch, 24 #

6 10/100/1000 BT ports, 24ports providing PoE 15Watts per

port, min. Approved Make : Netgear/D-Link/Cisco

System Rack 6U :- Supply, Installation, Testing &

Commissioning of 600 X 600, 6U Rack with cooling fan, power

strip, multi print, front glass door, 2 side ventilation with

appropriate hardware for mounting, one tray, two L Bracket

set. Approved Make :

Elixir/rittal/dlink 1.00 6413.50 Nos.

Poe Junction box:Supply, Installation, Testing &

Commissioning of outdoor POe juction box with power strip,

8 multi print, 2 side ventilation with appropriate hardware for

mounting, one tray, two L Bracket set any standard make.

Cat-6 Cable :- Supplying & laying with erecting outdoor

9 double coated CAT- 6 Cable Approved Make :

DLink/Digisol/HOC 200.00 48.48 Mtr.

25 MM PVC Rigid Pipe :- Providing and erecting ISI mark

Medium class RIGID 25 MM PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive

solution & Clamps with following dia of pipes, in approved

manner as directed any standard 150.00 28.28 Mtr.

Pole:Providing, installing, testing,commissioning of Highly

Corrosion Resistant Galvanized steel ple coates with corrosion

resistant coting with 2.5 - 3mm gauge thickness, 3-inch

diameter, 15 ft. highs with base plate of foundation and

feet RCC foundation. Make: Any Make

32'' full HD tv:Supply, Installation, Testing & Commissioning of

32'' full HD television (Including movable Stand). Resolution

12 1080p full HD,2+ USB,Headphone Out,1+AV,1+RF,HDMI-

2,steareo Sound Approved Make :Samsung,Sony,NV

ELECTRIFICATION

1 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III 24.00 485.81 PT.

2 Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III 12.00 674.68 PT.

3 Supplying & erecting energy saving Energy Efficient E+ (1 -

ft) 28 watt retrofit tube fitting with one no 28watt T-5 tube

complete with E.G.P. wings reflector / clear acrylic guard

cover & tube and electronic inbuilt circuit ballast of rating

130 to 325 V A.C. The fittings should be able to fit in any

conventional existing T - 8 tube fittings complete erected in

an approved manner 12.00 493.89 Each.

4 Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III 8.00 510.05 PT.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III 6.00 745.38 PT.

5 Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge.

6A Double Pole Modular MCB Switch 2.00 410.06 Ea.

16A Double Pole Modular MCB Switch 1.00 410.06 Ea.

6 Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor more than

0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt ,LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips

(iii) 16-20 watts, Surge-2 KV Cat-lll 12.00 589.84 Ea.

7 Providing & erecting Approved make Ceiling Fan with double

ball bearing ISI mark with Condenser 230 volt A.C.50 Hz

mm sweep complete having 3 blades aluminium body and

blade sets having ornamental design shanks , canopy erected

with earthing. [ Make shall be approved by Engineer in

Charge] 12.00 2311.89 Ea.

8 Providing & erecting 240 V MCB double pole switch for

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

(A) 6 to 32 Amp. Cat.III 1.00 278.76 Ea.

providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Cat. III

9 Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase

outgoing (b) sheet steel double door (IP-43) (iii)8 way 1.00 1152.41 Ea.

10 Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with coupling

and buch buried in specially prepared earth pit complete with

necessary 8 SWG earth wire. 1.00 368.65 Ea.

11 providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick action

& tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

directed (i) 25 Amps.DP Cat III

12 Providing & erecting 415V MCB Four Pole Switch for Lighting

Load (B curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity (a) 6 to

Amp. Cat. III 1.00 578.73 Nos.

Sheets steel powder coated enclosure suitable for

incorporating One/Two nos. MCB. 1.00 176.75 Nos.

1 Box Cutting the road surface to proper slope and camber for

making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed up to 50 Mt.Lead 15.00 109.05 Cu.M.

2 Providing and laying cement concrete 1:3:6 (1-Cement : 3-

coarse sand : 6-hand broken stone aggregates 40mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth 10.00 2769.69 Cu.M.

3 Providing and laying controlled cement concrete M200 and

curing complete including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in Slab

including C.C.Flooring with trimix vaccum dewatering system

including providing and fixing & removing of 'C' chanels

having 3'" x 3" as per required level, slope and thickness of

conrete road with surface vibrator and finishing with power

floater & trowel light brooming the surface & including

cutting & filling of expansion joint as directed by Engineer in

2 Construction of Material Recovery Facility Unit at Solid Waste Management Site at VADALI.

Excavation for foundation upto 1.5m depth including sorting

out and stacking of useful materials and disposing off the

excavated stuff upto 50Meter lead. (C) Hard Murrum

Providing and laying cement concrete 1:3:6 (1-Cement : 3-

coarse sand : 6-hand broken stone aggregates 40mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth 39.04 3095.25 Cu.M.

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundation & Footing 30.89 4355.12 Cu.M.

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in (B)

Providing and laying controlled cement concrete M200 and

curing complete including the cost of formwork and excluding

the cost of reinforcement for reinforced concrete work in Slab

including C.C.Flooring with trimix vaccum dewatering system

including providing and fixing & removing of 'C' chanels

5 having 3'" x 3" as per required level, slope and thickness of

conrete road with surface vibrator and finishing with power

floater & trowel light brooming the surface & including

cutting & filling of expansion joint as directed by Engineer in

Filling available excavated earth (excluding rock) in trenches

plinth, sides of foundations etc. in layers not exceeding 20cm.

In depth consolidating each disposited layer by ramming and

watering. 7.72 136.92 Cu.M.

Providing TMT Bar FE500D reinforcement for R.C.C. work

7 including bending, binding and placing in position complete

upto floor two level 7400.25 77.29 Kg.

Structural steel work (confirming to IS 4923-

1997)riveted,bolted or welded in builtup for all type

section,in framed work,including cutting, hoisting fixing in

position and applying a priming coat of approval steel primer

all complete as per structural design and direction of

engineers in charge. 9705.96 131.83 Kg.

SUPPLYING & FIXING with all required labour and machinery

Color coated Galvalume SPIDER ROOFING SHEET -

No. of Bays-1, Span (Mt.)-15.00, Length (Mt.)-22, Height (Mt.)-

9 7.50, Arch Rise (Mt.)-3.00, BMT - 0.80mm, APT - 0.85mm,

Tolerance : +/- 0.02mm, Coil width : 912mm, Tolerance : +/-

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

with bitumen and G.I. limpet washer or G.I. limpet washer.

filled with white lead complete excluding the cost of purlins,

Rafters and Trusses.(1) 0.80 mm thick sheet.

ELECTRIFICATION WORK

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

1 following type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete Cat. III 20.00 445.00 Ea.

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete Cat. III 18.00 471.00 Ea.

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire

with 2.5 sq.mm ( green) earthing wire from mcb d b board

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete Cat. III 12.00 829.00 Ea.

Providing and erecting indoor type halogen fitting made from

M.S. sheet with Aluminium reflector and holder with halogen

tube of following size. (B) With 1000 watt Halogen Tube Cat.

Providing & erecting 240 V MCB double pole switch for

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

(B) 40 Amp. Cat. III 8.00 293.00 Ea.

Providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick action

& tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

directed (iii) 63 Amps. DP Cat. III

Supplying & erecting Sheet Steel powder coated Cable end

termination Box to be mounted on Top or Bottom of the

6 MCB Distribution Box for housing/covering Extra wires &

Cables, suitable for following size of MCB DB Box. (G) Three

Phase 8 Way 1.00 683.00 Ea.

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-

200 Micron galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate

7 including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill Compound

:- Earthing compound should be capable to retain moisture

for long time Necessary test report must be submitted by

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg. 1.00 4546.00 Ea.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured

8 copper cable 1.1 KV grade to be erected as directed of

following size.

(A) 2 core 2.5 Sq. mm 72.00 100.00 Mtr.

(G) 3 core 6 Sq. mm 50.00 290.00 Mtr.

NOTE :-The rates quoted shall be exclusive of GST but Inclusive of all other taxes, duties which shall not be paid

extra. While GST will be paid for admissible part of actual work done at the approved tender rates. GST Shall be

paid as per prevailing rates at the time of payment.