REPAIR TO BOUNDARY WALL, FENCING, GATE AND AREA DRAINAGE AT WEST SIDE OF LEHL MARG UNDER GE (S) BINNAGURI

Amount

Demolition of cement concrete(Reinforced) of any description in any position not otherwise specifically provided for

Demolition of cement concrete(un-Reinforced) of any description in any position not otherwise specifically provided for

Dismantling wrought iron or mild steel work of any description not otherwise provided for grils.rails etc

Dismantling of barbed wire fencing work of any description.

Demolition of precast concrete block/brick walling built in cement mortar of any description etc complete all as specified.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum getting out , ramming n. exc 25 cm and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil

S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors/gate, ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M & L for providing reinforced cement concrete type B1,1:1.5:3 (Using 20 mm graded stone aggregate) in Precast posts, fencing posts, straining or terminal posts, struts etc, for fencing average sectional area exceeding 100 Sq. Cm and n.exc 250 Sq cm with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed.

Taking down and refixing of RCC Fencing post in same post hole incl of PCC (1:3;6) type C2 for foundation filling/ fixing/refixing of fencing post and two coat of white wash and repair of all other connecting items of fencing post complete all as specified and as directed.

S & F in repair Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc., as directed.

Taking down and refixing of Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc., as directed

M&L for providing cement concrete type B-0 (1:2:4)(using 12.5 mm size graded aggregate) in coping set incl weathering, slightly rounded or chamfered angles & thickness.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path /steps laid with and incl use and waste of form work and finishing the surface even and rough to receive the topping layer or tiling complete .

M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concerete complete all as specified

M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even and rough to receive floor finishes.

M&L for Precast reinforced cement concrete type B1 (1:2:4) 20mm graded stone aggregate as in slab,landings,balconies,canopies,deck slabs and in shelves and the like.

M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M & L 80 mm thick M-35 grade factory made vibratory compacted cement concrete rubber moulded, interlocking paver block any shape and size confiroming to IS 15658-2006 with grey cement and pigment as approved laid over and incl 50 mm thick consolidated sand cushion and joints filled with sand complete all as specified and directd.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in surface channels/drain including forming fair finished to drain channel.

M&L for brickwork with sub-class 'B' brick, straight or curved on plan exc 6m mean radius built in cement mortar 1:4.

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster in cement mortar 1:6 on fair fair faces of brickwork or concrete surfaces.

M&L for mild steel TMT bars,10mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips.

M&L for mild steel TMT bars 6mm to 8mm dia cut to length , bent to shape required, including cranking , bending and binding with MS wire , not less than 0.9 mm dia or securing with clip.

M&L for applying three coat of white washing including preparation of new or previously untreated surface of ceiling. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

M/s. MD IRSHAD

BBKundu

M/S MOHAN KUMAR BANSAL

S. G. CONSTRUCTION

M/S VIRENDRA KUMAR SINGH

ANUP ENGINEERING WORKS

SINGH & CO

samrat saw mill and joinery workshop

S.N. GHOSH AND CO.

BINOD TRADING CO.

PULAK SAHA

M/S S.K. CONSTRUCTION

L. B. SHARMA

M/S SINHA ENTERPRISE

R K AGARWAL

SS SHARMA