Loading
Loading…
Loading…
| Sl No | Description | Qty | Unit | prasad L1 | Haridas L2 |
|---|---|---|---|---|---|
| 1.00SHEET ROOFING | |||||
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 429.36 | kg | 150 ₹64,404 Lowest | 175 ₹75,138 |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 210.7 | kilogram | 100 ₹21,070 Lowest | 150 ₹31,605 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 125.02 | sqm | 715 ₹89,389.3 Lowest | 715 ₹89,389.3 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | 0.72 | cum | 7,900 ₹5,688 Lowest | 7,900 ₹5,688 Lowest |
| 1.00 | OD10869/2024-2025:Supplying and fixing 160mm dia PVC rain water gutter semi circular section including fitting with 32mx5m MS flat supporters at 1m interval etc.complete. | 24 | metre | 450 ₹10,800 Lowest | 450 ₹10,800 Lowest |
| 1.01 | 50.18.8.7.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2 | 14 | metre | 550 ₹7,700 Lowest | 550 ₹7,700 Lowest |
| 1.01 | 50.18.9.20.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend | 8 | no | 79.08 ₹632.64 Lowest | 79.08 ₹632.64 Lowest |
Tender Value
₹2.1 L
EMD Value
₹5,266
Closing Date
29 Jul 2024, 4:00 pmClosed
ASSISTANT ENGINEER
O/o The Assistant Engineer, LID and EW Section, Ottapalam Municipality.
CIVIL WORKS
2024_LSGD_681274_1
LSGD/CELSGD/TR/64900/2023
Open Tender
Civil Works - Buildings
Item Rate
180 days
OTTAPALAM
Please refer Tender Documents
10 documents required · 10 mandatory
₹555
Yes
₹5,266
Yes
30 Jul 2026
19 Jul 2024
30 Jul 2024
19 Jul 2024
29 Jul 2024
19 Jul 2024
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1059760.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .