PROVN OF RUNNING WATER TAPS AND ALLIED SERVICES IN MD ACCN AT AF STN PHALODI

Amount

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on other than fair faces of brick or concrete surfaces, finished surface even & fair without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:3) as on ceiling finished surface even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for preparartion of new plastered surfaces of walls and applying three coats of white wash on wall complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone agg as in plinth protection etc, finished even & fair without using extra cement including making joint with bitumastic filling in proportion of bitumen and sand (1:3) by weight complete all as specified and directed. Note : Concrete shall be laid at a stretch n. exc 3.0m in length and every turning corner.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, supplied and fixed complete all as specified and directed.

S&F Bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, supplied and fixed complete all as specified and directed.

S&F 15mm bore Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections or removal to store complete all as specified and directed.

S&F 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors including Cutting holes into or through brick walls built in cement mortar for inserting pipe and making good in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required area exc half brick but n. exc one brick complete all as specified and directed.complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections or removal to store complete all as specified and directed.

S&F 20 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors including Cutting holes into or through brick walls built in cement mortar for inserting pipe and making good in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required area exc half brick but n. exc one brick complete all as specified and directed.complete all as specified and directed.

S&F chromium plated stop cock cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe with long shank and cup (concealed type) 15mm bore complete all as specified and directed.

S&F chromium plated stop cock cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe with long shank and cup (concealed type) 20mm bore complete all as specified and directed.

S&F float valve of 20 mm dia ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F float valve of 25 mm dia ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured glazed ceramic tiles 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to the match tiles on vertical surface over and including 10mm thick plaster in CM (1:3) complete all as specified and as directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M/S SOLANKI GENERAL SUPPLIERS (BID ID -3167177)

KRISHNA CONSTRUCTION COMPANY (BID ID -3159542)

M/S HARIOM CONSTRUCTION COMPANY (BID ID -3167266)

YOG INFRA (BID ID -3160278)