Loading
Loading…
Loading…
Tender ID
Tender Value
₹10.3 L
EMD Value
₹26,000
Closing Date
20 Feb 2026, 9:31 pmClosed
Public Works Department
EXECUTIVE ENGINEER
Changing of old windows, providing mesh to windows, removing of kitchen glass partition wall and extension of wall, complete repairs to bathrooms, providing painting, extension of wooden partition, door fixing, extension of wardrobes, ixing of door calling bell, providing new screen to kitchen door and other allied works to Room No 265-266 in LH2 3rd stage, Bangalore
PWD/2025-26/BD/WORK_INDENT33152
PWD/2025-26/BD/WORK_INDENT33152
Open
Buildings
Two Tender Document System(Two Cover)
PWD No.1 Buildings Division Office Bengaluru
4 documents required · 4 mandatory
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 b)Satisfactory completion as prime contractor in similar workdone certificate for Civil Engineering works to an extent of 50% of the cost of the work i.e. Rs 5.17 lakhs
3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx2.5- B) Where A is Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited 2 month. B is Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 2 month. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 a)Achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs.10.34 lakhs
NIL
NIL
₹500
₹26,000
13 Feb 2026
13 Feb 2026
21 Feb 2026
18 Feb 2026
Changing of old windows, providing mesh to windows, removing of kitchen glass partition wall and extension of wall, complete repairs to bathrooms, providing painting, extension of wooden partition, door fixing, extension of wardrobes, ixing of door calling bell, providing new screen to kitchen door and other allied works to Room No 265-266 in LH2 3rd stage, Bangalore
19.22.1 Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to ... 40.79 m²
19.55 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per directi... 34.15 m²
19.51 Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate... 4.00 Unit
19.2.1 Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. 0.86 m³
2.1.4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ... 0.86 m³
15.1 polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac... 18.22 m²
7.18 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c... 4.10 m³
8.5.1 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever ... 42.47 m²
9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t... 37.30 m²
9.9 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as... 8.94 m²
15.18 Treating Active leakage from Concrete walls - Providing and grouting with single component Polyurethane Foam injection grout at dripping leakage locations, grout mixed at ratio of 10:1 (10 part... 8.00 Nozzle
20.50 Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per... 291.71 m²
8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an... 175.03 m²
8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ... 291.71 m²
8.64 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of En... 11.13 m²
8.67 French spirit polishing :One coats on old work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth ,... 48.91 m²
4.6 Providing general disinfection services, spraying of insecticide and pesticide inside and outside the building (flies, bedbugs,lizards, cockroaches, spiders caterpillars etc., including cost of materi... 292.98 m²
10.1.2 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, fac... 5.46 m²
10.4 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar t... 1.00 each
10.2 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. 10.30 m
12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr... 1.42 m²
9.33 Providing and laying linoleum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of mate... 66.00 m²
22.3 Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed bwp g... 58.73 m²
22.6 Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand bo xes,shelves,racks,almirah,cupboard and drawer etc. in... 38.25 m²
22.8 Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work 96.97 m²
14.10.2.3 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin... 1.00 each
14.62a Providing and fixing Sink cock with swivel spout & wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - ... 1.00 No.
14.35.1 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges a... 1.00 each
14.89b Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class-Premium 2.00 No.
14.32.4 Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular... 2.00 each
14.32.2 Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula... 2.00 each
14.54b Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium 5.00 No.
14.48b Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium 5.00 No.
14.95b Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium 2.00 No.
13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931 6.00 No.
14.41 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36
mm height of approved quality and colour, weighing not less than 300 g. 2.00 each
20.108 Repairs to existing Aluminium partition, refixing and relocating including cost of material,labour, complete as per specifications. 2.10 m²
22.15.4 Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm 6.00 No
22.15.6 Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 200x10mm 12.00 No
22.15.1 Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 200mm 25.00 No
22.9a Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with sS screws etc. complete as per direction of Engineer-in- charge. 200mm length 10.00 No
22.12 Providing and fixing stainless steel 304 grade soft closing hinges with two hole fixing & 165 degrees turning option for Wardrobe, Doors, Kitchen & other utilities of reputed make with scre... 40.00 No
12.77.1 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 40mm 6.00 each
19.59 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground o... 10.80 m³
12.89 Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic... 10.94 m²
13.9.1 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter 2.00 No.
NSR1 Supplying and fixing "HINDWARE" or Equivalent Counter Wash Basin Table top WB Immacula Cat Code No-91205 the item is inclusive of all materials, lead and lift loading and unloading, Transportation cha... 2.00 Each
NSR2 Providingand fixing of Hindware make Italian collection white vitreous chine clay wall Hung water closet European type with black solid plastic seat with lid, CP brass hinges, rubber buffers, Conseale... 1.00 Each
NSR3 Providing and fixing curtain rods of size 25mm dia stainless steel of heavy gauge pipe with stainless steel end brackets and stainless steel supporting couble brackets and L-brackets whereever nec... 6.60 m
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
33152 KW1 GEN.docx
Tender Document • 1.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .