Notified Area Office Ankleshwar

Name of Work: Replacement of old HPSV Type street light with new

LED Street light from Fechom to Kanoriya and Shree

Sulfuric to Panama Chokdi in industrial area at NA,

GIDC, Ankleshwar.

Item Description Qty. Unit Amount

Supplying and erecting approved make 10 mtr

Octagonal pole made from HR sheet steel. The pole

should be made as per IS. and shall be coated with hot

dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box

consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB

1 Mounting, stud type terminal and arrangement for cable 130 19772.77 No

termination to be erected on foundation as per details

given by manufacturer considering site requirement.

(A) 10 Mtr. Long 70 mm Top X 175 mm bottom

dia, 4 mm thickness with 275 mm X 275mm X 16 mm

Base plate, 4-M24 bolts and 750 mm long J- Bolt.

Approx Weight 145 KG

Providing and erecting Street Light pole bracket

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class GI sleeve

tubing of approx. 45cms.length and suitable for

mm /80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of

2 1.5.mtr. length with 110 deg.with vertical plane & 82 626.20 No

suitable welded stays, reducer and with check nuts

complete painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint. paint with

following nos of arms.(A) Decorative Single Arm

Bracket 1.5 meter

(B) Decorative Single Arm Bracket 2 meter 48 795.88 No

Supplying and erecting LED Street Light/Flood Light

fittings with High Power White LEDs wattage of 1 Watt

and above assembled on single MCPCB, efficiency

more than 130lm/W and Corrossion free High Pressure

die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminum with diffuser

and polycarbonate optics/lenses with company

mark/name engraved or embrossed 120 to 300 V,

Power factor more than .95, THD<10%, CCT 3000 K to

5700K, Uniformity ratio >0.45,Luminaire efficienacy >

100 lumens/watt. LED driver efficiency>85%

CREE/OSRAM/PHILIPS lumilds/NICHIA/SEOUL/Bridge

lux (USA) make LED used for luminaire. ( fittings

required LM-79 & LM-80 certificates) (Note: below

description have show room ranges of wattage capacity

of LED fittings. The Enginneer in charge may select any

Wattage capacity between the ranges shown.) Street

Light (IP-66), Surge protection - 4KV integral and 10KV

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

non integral, light must have 440VAC line supply

protection. It should with stand 48 hours for 440VAC

line supply. Over Voltage Shut down for mains voltage

> 320 V with auto- recovery feature. Toughned glass

with > 4mm thickness for better impact resistance.

(warranty Period 5 Year) For 120 WLED

Providing and erecting XLPE (IS:7098)(I)-88 ISI marked

armoured cable multistrand Aluminium conductor for

4 1.1 KV. to be laid on wall with necessary clamps or in 3700 153.52 No

existing cable trench / pipe at road crossing or floor of

following size of cables --A) 4 core 16 Sq-mm

B) 4 core 25 Sq-mm 350 190.89 No

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

5 unarmoured copper cable 1.1 KV grade to be erected 1600 137.36 No

as directed of following size. 3 Core 2.5 Sqmm

Making trench in soft soil of suitable width of 90 cms

deep for laying cable or locating the fault all over the

6 run and backfilling the same and making the surface as 3700 55.55 No

normal ground. Up to 25 mm2 Cable

Making trench in hard murrum/Tar Road of suitable

width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back

7 filling the same and making the surface as normal 140 432.28 No

ground. If Additional machinery like hammer driller or

Drilling the road without breaking the road surface

(Asphalt) for laying of cable for feeding power supply by

8 making upto 150mm dia. size of holes at both ends 100 616.10 No

Providing & laying. Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at

required depth for laying of cable. below ground / road

surface for enclosing cable and back filling the same to

make ground as per original. 50 mm dia.

Painting & numbering of street light pole with bracket

10 complete with two coats of Alluminium paint for 130 357.54 No

following size of pole. [c] upto 9 mtr

Construction of RCC Foundation for Octogonal/GRP

11 Pole with Anchor Bolts, as Per Drawings and 130 6666.11 No

Providing and casting in situ CC in grade M-20

(Proportions as per table 9 of IS456 2000 in masses by

weigh batching) using granite, quartze trap metal of size

6 mm to 20 mm for RCC work, including scaffolding

ccentering, formwork, needle vibrated consolidation,

curring complete up to 6 meter depth of height

(excluding cost of reinforcement and heat finishing) with

centering and shuttering/deshttering etc complete for

structure other than water retaiing (below G.L) Footing

(with out form work)

Supplying cutting, bending, binding and placing in

position steel as per plan and design and as per ISS

2502 including cost of steel and binding wire for

13 reservoirs/structures oly including lift up to 5 meter 1 69603.14 MT

height of depth below G.L. for all diameters. High yeild

strength deformed(HYSD)bars/cold twisted deformed

(CTD) bars confirming to IS1786(latest)FE-415

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

Providing and erecting 240 V MCB double pole switch

for motor & inductive load (C curve) having 10KA

14 breaking capacity & confirms to IS: 8828 in existing box 130 278.76 No

having following capacity. A) 6 to 32 Amp. (Cat-III)

Solder less crimping type Aluminum lugs conforming to

IS Suitable for Cable of following size evenly crimped

15 with high pressure tools & connected to switchgear 1228 15.15 No

terminals with brass/cadmium plated nut bolts in an

approved manner. 16/25 Sq.mm.

Pipe type earthing having 150 cms.long and 2.5 cms.

dia. galvanised iron pipe with coupling and buch buried

in specially prepared earth pit complete with necessary

8 SWG earth wire.

Dismentalling/ Cutting of Existing Street Light pole up to

17 9 meter height with bracket and fitting with hydra. 171 452.48 No

18 Hiring of tractor with Trolley, driver, diesel etc only for 5 1806.45 No

minimum 8 hr working per day.

Providing & erecting GI MCB channel (Size: 1 Meter (L)

19 X 35 mm (W) DIN RAIL. Complete fitting with GI nut 150 58.00 Nos

Supply and Installation of 60A 4 way Backelite

20 connector strip for Termination. 500 67.00 Nos

Supply and Installation of MS Cover Box for Octagonal

pole Terminal with Nut Bolt and connecting Chain

21 having size: A) 310 mm(L) X 130mm (W) X 3 mm 250 850.00 Nos

B) 360mm (L) X 130 mm (W) X 3 mm thick. 250 850.00 Nos

Approved make Four Pole LT Heavy Duty Switch

Disconnector Fuse Unit Cubical type for panel mounting

complete with operating mechanism suitable to operate

on 415V A.C. With HRC fuses of suitable load

confirming to IS. 13947 (Part I & III). of following

capacities. Cat-III 125 Amp

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

Supply and fabrication of Street light three phase Iot

GSM/GPRS Central Control & Monitoring System

(CCMS) Control Panel with all switch gear, bus-bar,

nos LCD Display, Energy Saving Feature and Spare

Relay facility having 10 years of reserve battery for RTC

with 50 programmable schedule, month-wise offset

settable facility, astronomic sunrise/sunset time

programing inbuilt for yearlong schedule. Operating

voltage @440 V ac with over voltage & short circuit

protection. 2 hours battery backup for street light

controller. Panel to have 1 nos of 3 phase- class

Energy Meter for Energy & fault monitoring on CCMS

web dashboard. power and control wiring etc complete

as per specification given, panel Enclosure fabricated in

MS 14 Gauge sheet & Enclosure size is 1000 mm x

1000 mm x 500 mm with 500 mm height mounting

stand with double door type. All incoming and outgoing

cable termination should be suitable for ring type lugs

termination, Panel suitable for 4 Nos out going circuits

for 4 C x 16 Sq.mm cable and 1 Nos incoming cable of

size 4C x 50 Sq.mm with following switch gear

complete connection. Panel suitable for outside open

area installation and whether proof with canopy, Panel

should be design with Double door with two separate

compartments with two inner door for cable termination

and switch gear. Panel Having IP65 Rating. Local

communication facility via mobile application in case of

GPRS connectivity frailer.

63 Amp Four Pole MCCB 36KA with thermal magnetic

Release -- 01 No

R-Y-B Indication Lamp 230 V AC

1 Nos 4 Pole ELCB

Door Switch for unauthorized access & tamper

Detection & Accelerometer for panel movement

detection &tamper alert

3 Nos of 3 Pole Contactor (ML-2 32A AC3 X 3 Nos)

CCMS Controller with timer -

2 Pole 2way Selector switch - 01 No

6A Control SP MCB, 10KA -01 No

O/G 32 A SP MCB, 10 KA - 16 No

Power terminal CBT /KBT type - 20 No's

Power Wiring 16 SQ.mm,25 Sq.mm, and 50 Sq.mm

copper flexible cable

1 Nos 4g / 5G Sim with slot with necessary data pack

5 Year Cloud Server Subscription

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR

Supplying & erecting funnel type earthing having earth

plate of 600 mm x 600 mm x 3.15 mm thk. Copper

earth plate burried in specifically prepared earth pit

mtr. below ground with 40 Kg. Charcoal and 40 Kg. salt

with alternate layers of charcoal & salt, 38 mm dia

Medium Class G. I. Pipe with funnel with a wire mesh

for watering & bricks massanary block, C. I. cover

complete as per para 7.3 of IS : 3043 with necessary

length of double 8 SWG copper earth wire - bolted to

the plate and covered in 38 mm dia. G. I. pipe - 2.5 mtr.

long complete connected to the nearest switch gears

with end socket as per direction & duly tested by earth

tester confirming to ISS & as per drawing - (1 Job per

Distribution Box)

Total of Part-1

(Part-2) Buy Back of Scrap Material

1 MS Scrap 8000 32.00 Kg

2 OLD HPSV Fitting 180 350.00 Nos

Total of Part-2

(Part-1 - Part-2) Rs.

I / We hereby agree carry out the work at I / We hereby agree carry out the work

the rate given in Schedule B @ _______ % at the rate given in Schedule B @ ______ %

Net Amount Rs. _______ Net Amount Rs. _______

Important Note:

1. The rates offered shall be inclusive of all applicable taxes (1% LWC, ESIC, PF,

packing, forwarding, insurance, loading, unloading, shifting & transportation at

store/ site of work at Ankleshwar Notified Area.)

The rates offered by Bidder shall be Exclusive of GST.

2. I/We have read the conditions mentioned in this tender & agree to abide by the

3. Please note that the agency in whose favor the tender is finalized by the

competent authority shall have to submit the document like insurance of the staff

engaged RPFC No. Labour license etc. and documents for vehicle.

4. The successful bidder in whose favor the tender is finalize by the competent

authority has to enter in to an agreement with Notified Area office in B-1

agreement form, the conditions & clauses of the agreement shall be binding to the

agency. If the bidder desires to study the same, the same is available in the office

of the Notified Area Officer, GIDC, and Ankleshwar during office hours of the

5. 1% labour welfare cess on the bill amount will be deducted from the each RA bill

as per Govt. norms.

SIGNATURE OF CONTRACTOR CHIEF OFFICER

NA, GIDC, ANKLESHWAR