Recaning of wooden/steel chair, repair to sofa set, beds and re-weaving of charpoys and repair of steel and wooden furniture including polishing / painting at furniture yard GE Ludhiana.

Amount

RE-CANING OF WOODEN CHAIRS: M&L for recaning of wooden chairs of Godrej Pattern with and including half round plastic cane 1.5mm to 2 mm wide and for border 3mm wide cane plastic including cutting and removing of old unsv cane from the frame complete all shown on the drawing complete all as specified & directed by Engr-in- Charge. Make of cane : Premier/Shah

Chair dining Drg No: FD-1105, 279

Chair Easy . Drg No: FD- 229

Chair writing. Drg No: FD- 280

RE-CANING OF CHAIR VERANDAH: M&L for recaning of chair Verandah with and including cane plastic 4mm wide half round complete including cutting and removing of old unsv cane from chair verandah and applying one coat of synthetic enamel paint (White) and providing four PVC shoe of best quality including removing of old unsv PVC shoes from Chair verandah all shown on the drawing complete all as specified & directed by Engr-in- Charge. Make of cane: Premier/Shah. : FD-256 &359

REPLACEMENT OF PLYWOOD FOR CHARPOY GI PIPE PLYTOP: M&L for removal of unsv Plywood from charpoy GI pipe and fixing new 12mm thick Plywood BWR grade with 75mm long 6mm dia fully threaded nuts and bolts with washers on both side 3 No in each long rail and 2 No in each short rail including 3 No iron strips (900x25x3mm) between two rails below Plywood top and including rounding off the corners of plywood complete all as specified & directed by Engr-in-Charge. Make:- Orchid / century / Greenply. Drg No: FD- 220

REPAIR OF CHARPOY GI PIPE : FD-220

S&F in replacement long rail made out of 32mm dia medium grade galvanised pipe including (welding / threading ) as per existing pattern complete all as specified & directed by Engr-in-Charge.

M&L for removal of unsv short rail from frame of Charpoy GI pipe, Fixing of short rail made out of unserviceable long rail 4.01 above after cutting & threading both ends to required size to make two short rails complete all as specified and directed by Engr-in-Charge

M&L for removal of unsv leg from frame of Charpoy GI Pipe . Fixing leg made out of unserviceable short rail 4.02 above after cutting & threading both ends to required size to make two leg complete all as specified and directed by Engr-in-Charge

M&L for tightening frame of Charpoy GI pipe and welding/ threaded joints complete all as specified & directed by Engr-in-Charge.

CHAIR EASY M&L for providing following parts of chair easy of Ist class Hard Wood as shown on drawing including dismantling & removing of old unsv parts from the frame and French polished with two coating through out the item. complete all as specified & directed by Engineer-in- charge. FD-229

Rear leg

Front leg

Side rail of seat

Front rail of seat

Back rail of seat

Bottom and Top rail of back

Side rail of back

French polishing with one or more coats on chair frame

CHAIR DINING: M&L for providing following parts of Chair dining of Ist class Teak Wood as shown on drawing including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats chair complete all as specified & directed by Engineer-in- charge. FD-279,1105,MAP-II/04

Rear leg

Front leg

Side rail of seat

Front rail of seat

Side stiffener

Centre stiffener

French polishing with one or more coats on chair frame

CHAIR WRITING M&L for providing following parts of Chair Writing of Ist class Teak wood as shown on drg including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats chair complete all as specified & directed by Engineer-in- charge. FD-280

Front leg

Rear Leg

Front Rail

Back Rail

Side Stiffners

Centre Stiffners

French polishing with one or more coats on chair frame

TABLE 900MM x 600MM x 760MM WITH & WITHOUT DRAWERS M&L for providing following parts of table 900mm x 600mm x 760mm dismantling & removing of old unsv parts from the frame including French polishing with one or more coats table complete all as specified & directed by Engineer-in- charge. Drg No:FD-224, 283 & 284

Table top 900x600mm made of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick shall be provided etc complete.

Long rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Short rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Stiffners made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Drawer made out of 12mm thick commercial Ply Wood with teak shade with 25mm dia knob complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on table frame all as specified & directed by Engineer-in- charge.

TABLE BED SIDE M&L for providing following parts of Table bed side dismantling & removing of old unsv parts from the frame complete all as specified & directed by Engineer-in- charge. Drg No:FD/E6/MAP/15 R

Table top made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top complete all as specified & directed by Engineer-in- charge.

Table Bottom made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top complete all as specified & directed by Engineer-in- charge.

Table side made out of pre-laminated particle board 18mm thick exterior grade with 4mm thick teak wood beading around the top complete all as specified & directed by Engineer-in- charge.

Mild steel powder coated handle100mm long for drawer complete all as specified & directed by Engineer-in- charge.

6mm thick commercial plywood with headless nails of table bed side for fixing table back side complete all as specified & directed by Engineer-in- charge.

Drawer made out of 12mm thick commercial Ply Wood and front of drawer made out of pre-laminated particle board 18mm thick exterior gradecomplete all as specified & directed by Engineer-in- charge.

Telescope stainless steel channel for suitable size as required complete all as specified & directed by Engineer-in- charge.

TABLE WRITING M&L for providing following parts of table writing including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats table complete all as specified & directed by Engineer-in- charge. Drg:FD-275

Table top 1145x600mm made of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick shall be provided etc complete.

Long Rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Short Rail made of first classTeak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Leg made of first class Teak Wood duly smoothed size and shape as shown on drg all as specified & directed by Engineer-in- charge.

Stiffners made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Drawer made out of 12mm thick Comercial Ply including teak wood edging including 25mm dia knob as per Trade pattern complete all as specified & directed by Engineer-in- charge.

Shutter made out of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on table frame all as specified & directed by Engineer-in- charge.

TABLE PEG M&L for providing following parts of Table Peg including dismantling& removing of old unsv parts from the frame including French polishing with one or more coats table complete all as specified & directed by Engineer-in- charge. Drg:FD-277

Table top made of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick complete all as specified & directed by Engineer-in- charge.

Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge

Long rail made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Stiffners made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Short rail made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on table frame all as specified & directed by Engineer-in- charge.

TABLE CENTRE M&L for providing following parts of Table Centre including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats table complete all as specified & directed by Engineer-in- charge. Drg:FD-274

Table top made of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge.

Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge

Long rail made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Short rail made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Stiffners made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on table frame all as specified & directed by Engineer-in- charge.

TEAPOY M&L for providing following parts of Teapoy including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats tablecomplete all as specified & directed by Engineer-in- charge. Drg: FD-278

Table top made of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge

Long rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge

Short rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge

Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge

Stiffners made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on table frame all as specified & directed by Engineer-in- charge.

TABLE DINNING FOR 6 PERSONS M&L for providing following parts of table dinning for six persons including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats table complete all as specified & directed by Engineer-in- charge. Drg: FD-273, FD/MAP-II/03

Table top made of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge.

Long rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Short rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Corners Between all Legs and Rails made of first class Teak Wood duly smoothed size complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on table frame all as specified & directed by Engineer-in- charge.

TABLE DINNING FOR 4 PERSONS M&L for providing following parts of table dinning for four persons including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats tablecomplete all as specified & directed by Engineer-in- charge. Drg: FD/MAP-II/03

Table top made of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge.

Long rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Short rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Corners Between all Legs and Rails made of first class Teak Wood duly smoothed size complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on table frame all as specified & directed by Engineer-in- charge.

CHAIR DINNING CUSHIONED M&L for providing following parts of Chair Dining Cushioned including dismantling& removing of old unsv parts from the frame including French polishing with one or more coats tablecomplete all as specified & directed by Engineer-in- charge. Drg: FD/E6/MAP/04

Cushioned seat as shown on drg complete all as specified & directed by Engineer-in- charge.

Stiffeners made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Rear Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Front Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Side rail of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Front rail of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on table frame all as specified & directed by Engineer-in- charge.

SOFA SET THREE SEATER : French polishing with one or more coats on sofa frame all as specified & directed by Engineer-in- charge. Drg:FD/E6/Map/07

SOFA SET SINGLE SEATER : French polishing with one or more coats on sofa frame all as specified & directed by Engineer-in- charge. Drg:FD-373, FD/MAP-II/02

ALMIRAH LARGE STEEL S&F for the following parts of Almirah large steel including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete all as specified & directed by Engineer-in- charge. Drg: FD-1032, FD-1033

Mild steel lock 65mm size with key in duplicate

Mild steel chromium plated handle 100mm long.

Paint with one or more coats on almirah all as specified & directed by Engineer-in- charge.

REPAIR TO ALMIRAH MEDIUM STEEL Supply and fixing for the following parts of Almirah medium steel including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete all as specified & directed by Engineer-in- charge. Drg: FD-1031,1034

Mild steel lock 65mm size with key in duplicate

Mild steel chromium plated handle 100mm long.

Paint with one or more coats on almirah all as specified & directed by Engineer-in- charge.

TABLE OFFICE CLERK STEEL S&F for the following parts of Table office clerk including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete all as specified & directed by Engineer-in- charge. Drg: FD-84M, FD-1004

Lock 6 lever of brass with two keys

Table top made of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge

Paint with one or more coats on table all as specified & directed by Engineer-in- charge.

TABLE OFFICE OFFICER STEEL S&F for the following parts of Table office officer including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete all as specified & directed by Engineer-in- charge. Drg: FD-84M, FD-1003

Mild steel lock 65mm size with key in duplicate

Table top made of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge

Paint with one or more coats on table all as specified & directed by Engineer-in- charge.

TABLE 900MMx600MMX760MM STEEL WITH OR WITHOUT DRAWER: S&F in replacement Table top made of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge. Drg: FD-1007 & 1008

Paint with one or more coats on table all as specified & directed by Engineer-in- charge.

TABLE 900MMx900MMx760MM STEEL S&F in replacement Table top made of 18mm thick block board with 8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge. Drg: FD-1009

Paint with one or more coats on table all as specified & directed by Engineer-in- charge.

S&F in replacement of the following components of chair revolving all as specified and shown on drg. FD/E6/MAP/01,75M

Replacement of PVC Base of chair revolving.

Replacement of Shocker of chair revolving.

Replacement of Arms of chair revolving

Removing of old material i.e.rexine cloth ,cloth marking ,fome seat & back etc and material and labour for providing the above mentioned items

Replacement of ply charpoy IP Hard Top and fixing new 12mm thick plywood BWR grade with 50mm long 4mm dia fully threaded nuts and bolts with washers on both side 2 No in each short rail including rounding off the corners of plywood complete all as specified and directed by Engineer-in-Charge. make:- Orchid / century / Greenply Drg:FD/MAP-II/01

M&L for providing PVC shoe of best quality including removing of old unsv PVC shoes from charpoy IP Hard Top complete all as spfd and as directed by Engr-in-Charge .

Replacement of ply Bed Hard Top and fixing new 12mm thick plywood BWR grade with 50mm long 4mm dia fully threaded nuts and bolts with washers on both side 2 No in each short rail including rounding off the corners of plywood complete all as specified and directed by Engineer-in-Charge. make:- Orchid / century / Greenply Drg:FD/E6/MAP/08R

M&L for providing PVC shoe of best quality including removing of old unsv PVC shoes from BED HARD STEEL complete all as specified and directed by Engineer-in-Charge.

S&F in replacement PVC seat & back of chair varandah all shown on the drawing etc complete all as specified and directed by Engineer-in-Charge. Drg:

S&F in replacement PVC seat of chair dining with 20mm steel screw all shown on the drawing including french polishing with one or more coats as required etc complete all as specified and directed by Engineer-in-Charge. Drg:FD/MAP-II/01

Supply for Foam cushion of 32 density of size 21" x22" x4" covered with superior quality tapestry cloth as approved by the GE including Removal of old unsv cushion and tapestry cloth of Sofa Sets Make of Cushion : Sleep Well/ curlon.

S&F in replacement of the following components of table computer as specified and shown on drg. FD/E6/MAP/01

Teliscope channels for table.

Knob Teak shade as per trade complete.

Allied International

H.K.TRADERS