COMPREHENSIVE MAINTENANCE OF RANGE LINE AND DOGRA LINE AREA UNDER GE (MES) ROORKEE

Amount

Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed

M & L for brick work, with class 'B' brick straight or curved on plan to any radius built in cement mortar (1:6) complete all as specified and directed

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 5 mm thick on ceiling surfaces in cement mortar 1:3 finished even & fair all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in CM 1:4 complete including mixing water proofing compound Note:-Water proofing compound will be measured and paid separately.

Supply only Liquid water Proofing Compound

M&L for Rendering 15 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in CM 1:6 complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified.

M&L for preparing newly plastered surface of wall and applying two coats of oil bound distemper complete all as specified and directed.

S&F in repair 75 mm dia PVC floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair for 150mmx 150mm Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' and setting and jointing in cement mortar 1:1complete all as specified and directed.

S&F in repair 110mm bore dia PVC (SWR )vent cowl complete all as specified.

S&F in repair 110 mm dia PVC (SWR) bends any radius with oval access door complete all as specified.

S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as specified.

S&F in repair 75 mm dia PVC (SWR) bends with access door any radius complete all as specified.

S&F in repair 110 mm dia PVC(SWR) plain bends any radius complete all as specified and directed.

S&F in repair PVC (SWR) junction single T bore 110 mm complete all as specified and directed.

S&F in repair PVC (SWR) junction single T with access door bore 110 mm complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all type earth work complete all as specified.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S&F in repair PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all type earth work complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, fixed on walls complete all as specified and directed.

S&F in repair Toilet paper Holder fixing to wall complete all as specified and directed.

S&F in repair central Wash Basin Mixer 15 mm Bore with 450 mm long braided hoses complete all as specified and directed

Repair only to CP long body bib taps , pillar tab etc of any make by replacing spindle,nippule ,washer etc at any size etc complete all as specified and directed.

S&F in repair 32 mm brass chrome finish bottle trap for Wash hand basin complete all as specified and directed.

Repair only to wall mixer of any make by replacing L-bends,connecting legs& spindle and, nipples etc complete

S&F in repair Towel Rack 600 mm long with lower Hangers complete all as specified and directed.

S&F in repair Wall mixer with 115mm long Bend pipe ,connecting legs & wall Flange complete all as specified and directed.

S&F in repair Towel Rail 600 mm long complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed

Taking up or down 20 mm bore steel tubing and connections, complete all as specified and as directed

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified and directed.

Refixing old steel tubing and connections in new or old position(wall,ceiling,floors etc.) 15 mm bore of pipe

Refixing old steel tubing and connections in new or old position(wall,ceiling,floors etc.) 20 mm bore of pipe

S&F 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line all as specified and as directed by Engineer-in-Charge.

S&F 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line all as specified and as directed by Engineer-in-Charge.

S&F in repair 15 mm short body bib tap cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete.

S&F in repair 15 mm size Long Body bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete.

S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete.

S&F in repair 15 mm size bib taps PTMT type any colour high pressure screwed for iron pipe and fixed complete all specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including bracket and pair of rack bolts waste coupling pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed by Engineer-in-Charge.

S & F in repair Bathroom cabinet mirror of hard thermosetting plastic of size 550x400mm/405x360 mm fitted with superior quality distortion free 4mm thick mirror, fixed in repairs, complete all as specified and directed. Make- Prayag Cat Part No BA-12 or techno-commerically equivalent model in Jaquar / Cera or as approved by GE

S&F in repairs 15 mm dia brass chromium plated pillar tap long shank with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long screwed shank complete.

S&F in repairs PVC flexible waste pipe 32 mm dia and over for fixing in urinals and wash basin ,kitchen sink complete.

S & F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

S & F in repair PVC fiber sheet corner shelf with complete all as specified and directed.

S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipeor union for fixing with 15mm pipe.

S&F CP Shower arm 15 mm size, with flange fixed to wall complete all as specified.

S&F in repair brass chromium plated Tumbler holder all as specified as approved by Engr-in-charge.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connection complete.

Supply and fixing(in Repair) Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device.

Supply and fixed in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx350mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications. Note : Vitreous china wash down water closet (Pedestal Pattern).

S&F in repair jet spray with flexible pipe and holding screw other fittings etc complete all as specified and as directed

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging devices complete all as specified and directed.

S&F in repairs flush handle PVC with adjustable lever and hook for low level flushing cistern complete all as specified and as directed

S&F in repairs PVC syphon complete for low level flushing cistern complete all as specified.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete.

Supply & Fixing in repair PVC Syphon kit suitable for PVC Cistern complete all as specified and directed.

Removing and refixing of bottle trap from WHB after cleaning and removing all blockages etc. complete all as directed.

S& F in Repairs PVC Syphon kit suitable for One piece WC Cistern complete all as directed.

Resecurring of syphon kit by minor adjustment and replaceemnt of syphon washer etc. Complete all as directed.

S & F in repair Angle cock, 2 way, with wall flange 15 mm dia including fixing to pipe, fixed in repair, complete all as specified and directed.

S&F in repair Health faucet of superior quality ABS body with 15 mm dia 1.25 m long flexible tube and wall hook including fixing complete all as specified and as directed.

S&F in repair waste coupling of 32 mm size chromium plated for glazed ware sink basins, etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed.

S&F in repair waste coupling of 40 mm size brass chromium plated for sink, etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed.

S&F in repair 450 mm long PVC connections 15 mm size with PTMT nuts at both end complete all as directed.

S&F in repair stainless soap dish fixed to wall complete all as specified and directed.

S&F in repair 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 g ms) complete all as directed.

S&F in repair 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 g ms) complete all as specified and directed.

S&F in repairs cover for HDPE water tank of capacity 500/1000 ltrs rotating type including frame including nut bolt complete all as specified and directed.

S&F in repairs CP grating any type 125 mm dia fixed over floor/nahani trap (with hole/without hole) complete all as specified.

Supply and fix in repair 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

Supply and fix in repair 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

Cleaning of HDPE tank of capacity up to & including 500 Litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete all as directed.

All as per item No.77 here-in-before but capacity of tank exc 500 litre but not exc. 1000 litres

Repairing only for Leakage of Rotational moulded polythene three layer water storage tanks position 500ltrs capacity including disconnecting the tank with rapair the leakage portion using M seal, 2 Nos of 20 to 25mm GI union and checked nut etc complete all as specified and directed.

Labour only opening of air lock in toilets/ bath and kitchen but excluding fittings complete all as specified and directed.

S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,including making thread to both ends of pipes for fixing,screwed both ends for iron pipes and fixed.

S&F Stainless steel plate rack / utensils rack of size 900mm x 1200mm x 300mm depth made out ot 0.63mm thick stainlesss steel sheet, fixed to wall with brass screws including provision of necessary fittings / fixtures viz., nuts, bolts and washers of suitable size, the plate shall conform to the sample kept in sample room of AGE B/R-II, complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair small fittings galvanised iron medium grade such as socket, elbow, nipple, tee, union etc for 15mm bore pipe complete all as specified and directed.

S&F in repair small fittings galvanised iron medium grade such as socket, elbow, nipple, tee, union etc for 20mm bore pipe complete all as specified and directed.

S&F in repairs GI nipple 15mm bore fully threaded with two numbers check nuts and washers for PVC tank, 100mm long to PVC tank with back nut and washers for inlet and outlet pipe.

S&F in repairs GI nipple 20mm bore fully threaded with two numbers check nuts and washers for PVC tank, 100mm long to PVC tank with back nut and washers for inlet and outlet pipe.

Resecuring or easing & adjusting without taking down door shutter area exc. 1 Sqm but n exc 2 Sqm each complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each and making good the disturbed surface complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and n. exc 2.00 Sqm each.

M&L for Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

M&L for cement concrete type C-1 (1:3:6) 20mm graded stone aggregate as in bed blocks for fixing hold fasts and fillling of chowkhats etc. all as specified and directed.

M&L for applying two coats of synthetic enamel paint on primed steel surface of any description over 10 cm width or girth complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm MS Solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Supply & Fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

S&F 35 mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforcement with MS square tube supplying and fixing in opening as per specification & sketch shown in sketch 8 of SSR part II.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck indie with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fittied in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

Supply and fix 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

Supply & fix 100mm long hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F 200 mm size aluminium anodized barrel tower bolts of extruded section and fixed.

S&F 150 mm long aluminium anodised handle fabricated type all as specified and as directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in Sqm n.exc 0.50 Sqm in each pane complete.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in Sqm exc 0.50 Sqm in each pane complete.

S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete.

S&F in repair 2nd Class hard wood plain fillets square/rectangular in section, sectional area exc 6 Sqcm but n.exc 13 Sqcm, wrought and fixed with nails complete

Taking down existing aluminium windows/door exc 1.50 Sqm and not exc 4.00 Sqm and re-fixing the same after minor repairs etc replacement of rubber beading and aluminium strips etc complete all as specified and directed.

S&F in repair 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) ISI marked and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete.

Supply & fix in repair 100mm long hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F in repair 100mm size aluminium anodised handle, fabricated type all as specified and as dierected by Engineer-In-Charge.

S&F in repair 150 mm long aluminium anodised handle, fabricated type all as specified and as dierected by Engineer-In-Charge.

S&F in repair 100 mm long Aluminium anodised barrel tower bolts of extruded section and fixed.

S&F in repair 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed.

S&F in repair 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed.

S&F in repair 300mm size mild steel rat tail rod pattern door springs ISI marked including roller & roller plate etc complete.

S&F in repair 100 mm size 4-lever mild steel mortice lock vertical type with two keys etc complete.

S & F in repair floor door stopper of Aluminium anodised body and tounge anodised with hard drawn steel spring of cover plate length of 150 mm size.

S&F in repair Aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete.

S&F in repair 25 mm dia stainless steel drapery rod cut to size and fixed in position including brackets fixed to wall complete all as directed.

S&F in repair stainless steel end cap suitable for drapery rod of 25 mm dia complete all as specified and directed.

S&F in repair 100 mm aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised having width of flap 30mm complete all as specified and directed.

S&F in repair Door Seal length of each door seal is equal to width of door fixed to door bottom rail including all fixing arrangement such as screws ,nails etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured joint free Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surface 450x300/300X200 7-8mm thick set and jointed in skirting over 10mm thick rendering in CM 1:3 pointed neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L light Shade Vitrified tiles 10mm thick (Square/ rectangular) polished, area of each tiles not exceeding 0.38 sqm, in floors etc. set and jointed in neat cemet slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15mm thick in CM 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick Granite black work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S& F in repair Mild steel tubing of 25 mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings and brackets (wall to wall or flush to wall) for securing to curtain rod, complete all as specified and directed.

S&F in Repair of 18 mm thick HDMR Board both side plain colour fixed with screws/ solvent cement/adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets including mica and all hardware fittings complete as per specifications and as directed complete all as specified. (Note: Fabrication and installation work to be carried out by authorised Fabricator only).

S&F in Repair of 18 mm thick HDMR Board one side prelam/rigid laminated and other side plain white colour to make kitchen cabinet Shutter/drawer front shutter including mica and all hardware fittings complete as per specifications and as directed complete all as specified. (Note: Fabrication and installation work to be carried out by authorised Fabricator only)

Cleaning of manholes including sewage lines 100/150mm dia from chamber to chamber at a distance not exceeding 50 mtrs up to depth 1.5 mtrs from top of manholes to bottem of pipeline by using high pressure , chasis mounted high flow jetting machine including getting out sludge/ waste water from manholes by using suction machine of suitable capacity , well flushing the manholes and sewage line after cleaning including disposed off sludge waste water to low lying area out side MOD land all as directed

As per item No 134 here-in-before but 150/200mm dia pipe upto depth exceeding 1.5 mtrs but not exceeding 3 mtrs and distance between the chambers not exceeding 50 mtrs.

As per item No 134 here-in-before but 200mm /250mm dia pipe upto depth exceeing 3 mtrs but not exceeding 6 mtrs and distance between chambers not exceeding 50 mtrs.

As per item No 134 here-in-before but 300mm /450mm dia pipe upto depth exceeing 3 mtrs but not exceeding 6 mtrs and distance between chambers not exceeding 50 mtrs.

Attending day to day complaint for blockage in gully trap / WC / floor trap / nahani trap upto first manhole including necessary T&P for pumping / rodding etc complete all as specified and directed by Engineer-in -Charge. Note for item Nos 135 to 138 : Contractor or his accredited representative/ supervisor will report to the I/C Maint Roorkee at 8.30 AM on every working day to collect the complaint slips and will report the completion to the concerned JE on the same day. The complaint to be attended and cleared within 24 Hrs or otherwise as given in particular specifications from the date and time of handing over of complaint slip and to be deposited to the concerned JE I/C or Engineer-in-Charge duly signed by the users. All blockages / complaints to be cleared within 24 Hrs. If any blockage is not cleared within 24 Hrs, a panelty of Rs 250/- per complaint shall be imposed to the cotractor for every day of delay.

Cleaning of sludge / sludge water / solid / semi solid soil from septic tank includig sludge chambers / soakage well by using suction machine of adiquate vaccume pressure and carring capacity including disposing off the same out side MoD land .

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in soft / loose soil complete

All per item No140 here-in-beforebut exc 1.5 m and n exc 3.00m depth

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Demolition & breaking up 150mm dia, including subbase pcc bed and salt glazed stone ware/ AC/ RCC drain pipe jointed in cement mortar and taking out of the trenches removing the debries from site complete all as specified and as directed.

Demolition & breaking up 200mm dia and salt glazed stone ware/ AC/ RCC drain pipe jointed in cement mortar and taking out of the trenches removing the debries from site complete all as specified and as directed.

M&L for Concrete bed to drain pipes 200 bore including packing under and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for Concrete bed to drain pipes 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for salt glaze stone ware drain pipe laid in trenches and joints all as specified (internal dia of pipe 150 mm bore pipe) completed all as specified and complete all as specified and directed.

M&L for salt glaze stone ware drain pipe laid in trenches and joints all as specified ( internal dia of pipe 200 mm wore pipe) completed all as specified and completed

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper, over and including a coat of 1 mm thick wall care putty with preparation of plastered surfaces complete all as specified and directed.

M&L for preparing old decorated plastered surfaces of wall including cornices, pilastered etc. by brooming down or steel wire brushing, scraping down existing colour surface smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of oil bound distemper (approved colour/ shade) complete all as specified and directed.

Dismantling of floor of WC and bath not exc 500mm deep and removing out the cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditions, grinding any sharp edges etc complete all as specified and directed. (b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (c) M&L for a glass fibber reinforced acrylic modified cementations coating system with base coat @ 1.50 Kg/Sqm glass fiber reinforcement and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or MC Bauchemie India Pvt Ltd. (d) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with as specified. (e) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (f) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (g) The area of Each WC portion is n.exc 2.00 Sqm each. (h) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. Note : The work will be executed by authorised manufacturers/ applicator.

M&L for powder coated aluminium window and ventilator shutter, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m (min) including, necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws suitable anodized fittings such as, hinges, handles, including anodised aluminium frame complete all as specified & directed.

M&L for aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) frame for windows csw, ventilator with one or more rebates joining cleat for fixing etc complete all as specified including concealed type lock for all three shutters all as specified and directed

M & L for factory made single extruded WPC solid door/window/ frame/ chokhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and nature fibbers (Wood powder/ rice/ husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdraw strength of 1800 N (face) & 900 N (Edge). Minimum compressive strength 50 N/MM2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof/ moisture proof/fire retardant complete all as specified and directed.

Taking down old U/S wooden/steel chowkhat with shutter n.exc 1.50 sqm each and removing from site

M&L for Factory made Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, tower bolt complete with glazing bars, dovetailed or welded including soap coat complete all as specified and directed.

S&F framed work such as grills gratings, etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, door chowkat, ladders, framed balusters, walk ways, railings, framework of water tanks, hold fast, sheet and similar work conforming to Fe-410-0 or Fe310-0

Chipping of unsound/weak concrete material of 25-50mm average thickness from slabs, beams, columns, chajjas etc with manual chisel and or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc and disposal of debris for all lead and lifts complete all as specified and directed.

Cleaning of rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make Fosroc reebaklens RR or equivalent in SIKA /THERMAX/ FOSROC with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry complete and then Providing mixing and applying over reinforcement bars zinc antirust agent as per specification of make 'Fosroc Nitozinc Primer STD Base' or equivalent in SIKA/Thermax/FOSROC complete all as specified and directed.

Providing mixing and applying bonding coat of Epoxy bonding adhesive having coverage 2.20 Sqm/Kg of approved make 'Fosroc' the Nito bond EP chemical or equivalent of SIKA / THERMAX / FOSROC approved adhesive on chipped portion of RCC complete all as specified and directed.

M&L for micro concreting of RCC columns, beams, slabs, chajjas etc in layers 0-25mm thick (total thickness) in grade M-25 with cement content not less than 350 Kg per cum with approved design mix concrete having the specified minimum characteristic compressive strength (with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria) including the cost of centering and shuttering at edges and corners etc complete all as specified and directed.

Supply and fix in replacement of switch piano flush type polycarbonate single pole one way 6 Amps.

Supply and fix in replacement of switch piano flush type polycarbonate single pole one way 15 Amps.

Supply and fix in replacement of socket outlet polycarbonate 2 in 1, 3 pin 5 Amps flush type.

Supply and fix in replacement ofsocket outlet polycarbonate 2 in 1, 5 pin 15 Amps flush type.

Supply and fix in replacement of bell push flush type 5 Amps.

Supply and fix in replacement of Bell electric Ding-ding working on single phase 230 Volts AC Supply.

Supply and fix in replacement of lamp Holder B-22 base, PVC body

Supply and fix in replacement of LED Bulb 7 watts, 230 Volts.

Supply and fix in replacement of LED Bulb 12 watts, 230 Volts.

Supply and fix in replacement of capacitor 2.5 mfd, if ceiling fan required rewinding or found defective then same has to be submitted to AGE E/M yard for rewinding and necessary action.

Supply and fix in replacement of ceiling rose in poly carbonate 3 terminal brass, flush type 6 Amps, 220 volts AC.

Supply only LED T5 tube light fitting 20watts 4ft, 200 lumen with polycarbonate housing and polycarbonate diffuser with integrated electronic driver.

Supply and fix in replacement of LED mirror light light fitting Integral slim LED batten Integral 9 / 10 watts of 2 feet long internally prewired complete.

Supply and fix LED 30 watt Building security light fitting mounting type made out of one piece in pressure die-cast aluminium housing with high efficient LED as lighting source and PC Cover separate compartment for driver

Supply only LED Bulk head 10 Watts, 230 Volts complete.

Supply and fix electronic socket type fan regulator rotary type in 5 steps, 240V, 50Hz

Supply and fix electronic switch type fan regulator rotary type in 5 steps, 240V, 50Hz

Supply and fix electronic socket type fan regulator rotary type in 5 steps compatible for BLDC fans, 240V, 50Hz

Supply and fix in replacement of MCB SP 6-32 Amp, 6KA 'B' Curve

Supply and fix in replacement of MCB SPN 40 Amp, 6KA 'B' Curve

Taking up or down galvanised steel tubing alongwith connections and Supply and fix galvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor fixed on wall and ceiling complete all as specified and directed of size 20 mm bore.

M&L for sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 6.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion including taking down existing unserviceable submain wiring of any description complete all as specified and directed.

All as per item No 184 but of size 4.00 sqm

S&F Exhaust fan PVC body AC single phase 230/240 Volt of size 250 mm sweep, rpm not less than 1100 rpm complete with louvers shutter including making hole and grouting of nut bolts etc and making good the disturbed sufaces of wall all as specified and directed .

Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron, UL listed, CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 50kg/pit(resistivity is less than 0.12 Ohm meter) tested as per IEC 62561-7. The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 240 x 200mm) and FRLS insulated copper conductor of size 6 sqm, single core cable drawn through and including light grade GI pipe of size 15 mm upto 7 mtr incl cutting and chases on wall and floor and making good using PCC complete including taking down unserviceable earthing all as specified and directed.

Supply and fix in replacement of power unit MCB protected plug and socket board in sheet steel enclosure with 20 Amp rated mini MCB and 20 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board including taking down existing unserviceable plug & socket board of any description and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed.

Supply and fixing in replacement of sheet metal enclosure double door type for MCBs DB SPN (Single pole and neutral) 240V AC 8 way with suitable rated busbar, minimum ingress protection of IP40 all as specified and directed.

Supply and fix in replacement of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar of suitable size, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCCB/MCBs shall be measured and paid separately.

Supply and fix MCCB 100A, 25 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed.

Supply, fix and fabricate 18mm thick prelaminated Particle board, interior grade, with screws & hinges to timber/ wood/ welded to angle iron frame for meter box, coloured and pattern as approved including hinge, locking arrangement and stainless steel bright finish handle complete all as specified and directed by Engr-in-charge. (Note : Bidders have to read the Note in special conditon of CA page No 70 (R) while quoting the rates)

Alankar Traders (BID ID -3454590)

R K TYAGIS (BID ID -3448517)

AKANSHA.ASSOCIATES (BID ID -3453059)

Maa Vaishno Enterprises (BID ID -3448117)

M/s Chitter Mal & Co. (BID ID -3448716)