Repair / Renovation in the existing toilet in Shivalic PG Boys Hostel at CSKHPKV,Palampur

Amount

Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead (wooden/concrete joists to be measured and paid for separately) For thickness of tiles upto 25mm including entire carriage of material within all leads & lifts.

Demolition above grond level up to floor two level including disposal of unseviceable material within 20 mts. Lead including entire carriage of material within all leads & lifts. un-reinforced concrete upto 15 cm thickness

Providing and laying cement concrete 1:6:12(1cement:6sand:12 graded crushed stone aggregate 40mm.nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth including entire carriage of material within all leads & lifts.

Providing and laying coloured glazed digital tiles of approved make 6mm thick (300x450mm or 300x600mm size ) in skirting ,risers of steps on 12mm thick cement mortar 1:3 (1cement:3 sand) and jointed with cement slurry of white cement including entire carriage of material within all leads and lifts.( Nitco/ Kajaria Somany make)

Providing and laying Coloured printed jointless antiskid floor tiles 6 mm thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement including entire carriage of materials within all leads and lifts.( Nitco/ Kajaria / Somany make)

Providing and fixing to existing door frames, 30mm thick factory made PVC panelled door shutter consisting of frame made out of M.S.tubes of 19 gauge thickness and size of 19mm x19mm for styles and 15mmx15mm for top & bottom rails,M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC "C" channel of size 30mm thickness,70mm width out of which 50mm shall be flat and 20mm shall be tappred in 45 degree angle on either side forming style and 5mm thick,95mm wide, PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm thick, 20mm wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both side PVC Sheet to be fitted in the M.S.frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive including fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm size with necessary screws etc complete including entire carriage of materials within all leads and lifts.

Distempering(two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer including entire carriage of material within all leads & lifts(Nerolac/Asian make 1st quality)

Providing and fixing Glass panes with putty and nails including removal of broken glass panes where ever necessary including entire carriage of material within all leads & lifts. Frosted Glass 4 mm thick

Providing and fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) Orissa Pattern (Hindware/ Parryware/ Jaguar make) including entire carriage of material within all leads & lifts.

Providing and fixing PTMT coloured/white tile high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet,outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)

Providing and fixing CP brass bib tap with capstan head: 15mm.dia ( Hindware contesa/ Jaquar Continental / C-Zar/Nova-Specturm make) including entire carriage of material within all leads & lifts. Short Body

Providing and fixing C.P Brass pillar tap with Capstan head 15mm dia ( Hindware contesa/ Jaquar Continental / C-Zar/Nova-Specturm make) including entire carriage of material within all leads & lifts.

Providing and fixing C.P. brass angle valve 15mm without Nuts and pipe ( Hindware contesa/ Jaquar Continental / C-Zar/Nova-Specturm make) including entire carriage of material within all leads & lifts.

Providing and fixing P.V.C connection with brass unions 300/450mm length 15mm nominal bore of superiour quality including entire carriage of material within all leads & lifts.

Providing and fixing 100mm stainless steel grating (Heavy duty) for gully, floor or Nahni trap including entire carriage of material within all leads & lifts.

Providing and fixing 600X600 mm.beveled edge mirror of superior glass mounted on 6mm. thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers (Exotia/Modiguard make) including entire carriage of material within all leads & lifts.

Providing and fixing PVC waste pipe for wash basin 32 mm dia complete in all respects including entire carriage of material within all leads & lifts.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes,having thermal stability for hot and cold water supply,including all CPVC plain and brass threaded fittings,including fixing the pipe with clamps at 1.00 mts spacing.This includes jointing of pipes and fittingswith one step CPVC solvent cement including testing of joints complete as per the direction of Engineer in Charge including entire carriage of material within all leads & lifts.

20 mm nominal outer dia pipes (Finolex/vectus/SFMC make )

25 mm nominal outer dia pipes (Finolex/vectus/SFMC make)

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings 550mmx400mm (Hindware/ Parryware/ Jaguar make) including entire carriage of material within all leads & lifts.(Hindware/ Parryware/ Jaguar make)

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings (Hindware/ Parryware/ Jaguar make) including entire carriage of material within all leads & lifts.

Providing and fixing C.P. Brass waste for wash basin or sink 32mm dia including entire carriage of material within all leads & lifts. (Hindware/NOVA/ESS ES make)

Providing & fixing GI/MI union (Where not included in the item) 25mm dia including entire carriage of material within all leads & lifts.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including entire carriage of material within all leads & lifts.(Finolex/Diplast/Vectus Make)

75mm type B 6.00 kg pressure .

. 110mm type B 6.00 kg pressure .

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. including entire carriage of material within all leads & lifts. (Finolex/Diplast/Vectus Make)

75 mm dia

110mm dia

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc.complete.(Finolex/Diplast/Vectus Make) including entire carriage of material within all leads & lifts. 75mm dia

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete.(Finolex/Diplast/Vectus Make) including entire carriage of material within all leads & lifts.

75 mm dia

110mm dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc.complete including entire carriage of material within all leads & lifts (Finolex/Diplast/ Vectus Make)

75 mm dia

110mm dia

Providing and and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.110 mm X 75 mm. (Finolex/Diplast/ Vectus Make)

Providing and fixing C.P. soap dish with C.P. brass bracket fixed to wooden cleats with C.P. brass screws including entire carriage of material within all leads & lifts. (Hindware/Cera/Somany Make)

Providing and fixing vitreous china Large pattern urinal including making connection the urinal with waste pipe by means of white lead mixed with chopped hemp including CP spreader for flushing (waste pipe to be measured and paid for separetlly) including entire carriage of material within all leads & lifts. (Hindware/Jaguar /Parryware Make) Flat back type of size 610mmx410mmx380mm

Providing and fixing division plate for urinals 600mmx300mm Vitreous China including entire carriage of material within all leads & lifts. (Hindware/ Jaguar /Parryware Make)

Providing and fixing health faucet thumb operated with bracket and flexible pipe 15 mm including entire carriage of material within all leads & lifts.(Hindware/ Cera /Paryware Make)

Providing and fixing exhaust fan of following sizes in the existing opening including making the hole to suit the sizes of above fan,making good the damages ,connection, testing and commissioning etc.as required:-2504 Exhaust fan light duty (Domestic) 300 mm sweep including entire carriage of material within all leads & lifts.

Providing and fixing C.P. brass urinal flush cock 15 mm dia including entire carriage of material within all leads & lifts. (Hindware /Nova/Ess Ess make)

Narender Thakur Govt. Contractor (BID ID -528818)