REPAIRING TO DAMAGED 500 KVA OIL COOLED AUTOMATIC VOLTAGE CONTROLLED SERVO STABILIZER NO I ALONG WITH ALLIED WORKS INSTALLED AT CONVENTION CENTRE , JAMMU

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Executive Engineer, Mechanical & Hospital Division GMCH Jammu.

REPAIRING TO DAMAGED 500 KVA OIL COOLED AUTOMATIC VOLTAGE CONTROLLED SERVO STABILIZER NO I ALONG WITH ALLIED WORKS INSTALLED AT CONVENTION CENTRE , JAMMU.

MHDJ/e-NIT 91 of 2026-27 Dated: 25.06.2026 Due : 03.07.2026

Sl. No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Rate including GST to be quoted by the bidder Rs. P Currency Convertion against each Item Quoted Currency in INR / Other Currency Rebate on old parts in Percentage (%) if any Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Net Cost of item Rs. P

2 Repairing the damaged 500 KVA oil cooled automatic voltage controlled Servo stabilizer No 1 installed at Convention Centre Jammu by way of disconnecting of all incoming and outgoing electric connections and draining out all the T- OIL and storing it properly in barrels. Job includes dragging out the Servo manually/mechanically using tools & tackles. Dismantling of Stabilizer by way of unfastening Nuts & Bolts of top cover and extracting out the damaged coils along with core by means of chain pulley block and tripod stand. Job includes replacement of damaged dimmer coil (variac assembly) 02No with new one, repairing to other dimmer coils by way of polishing with emery paper and proper varnishing, replacement of control cards 03 Nos, synchronous Motors 02 Nos, limit switches 01 No,, moving arms 03 Nos with carbon holders and carbon brushes with holder 32 No, voltmeter 01 Nos, and phase indicator set and replacement of panel wiring and internal wirings etc and lubricating of all the gears of servo motors. The job also includes cleaning, servicing of oil chamber by checking of leakage and plugging it by way of welding and assembling of stabilizer.Job includes dragging in the servo & then filling with fresh T-OIL (400 ltrs.) so that all coils are fully immersed in the oil. Making connections of voltage stabilizer input and output side by connecting the cable. Job also includes thimbling to end terminals by crimping process and charging the stabilizer on no load for 8 hours, then testing the stabilizer on full load. The job includes cost of material, labour charges, hire charges of tools and tackles and all the taxes as applicable. 1 job Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information