WBPHED/AE/HQ/NMD/NIeT- 01 OF 2025-2026, Sl. No. 09

Amount

Supply, delivery at store of 9 mtr. long steel tubular pole (410 SP-26) (Bottom 114.3 X 4.5) (Middle- 88.9X 4.05) ( (Top-76.1 X 3.25). (As per PWD Schedule),. Including supply & fixing of single arm header of 40 mm dia and 1.5 mm long, CI base plate, CI cap etc. (Make-Calcutta Pole & Tubes Co/ Jindal/Other PHED approved make).

Erection of single Steel tubular pole of length as given below with/ without sole plate & cap etc. in CC foundation (Proportion and dimension indicate below), having 600X600X150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including cc (6:3:1) muffing 0.30 mts. Dia and 0.30 mts. Above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 km form store to work-site including filling up the excavation earth pit with shifted soil and ramming properly. Upto 9.0 mtr. Size 0.6X0.6X1.70 mts.

Extra on item 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.45X0.45X0.60 mt. above ground level, neatly cemented finish) (3 mm thick) at the base pole (in lieu of CC muffing) suitable for alkathene /polythene pipe entry as directed for street light wiring, incl. S & F 20 cmX15cm X10cm GI Loop box, 16 SWG & incl. drilled hole in pole.

Supply & delivery 6 sq mm 2 core Al. Ar. Cable .

Laying of one No. 2X6 sq mm Al. Ar. cable (Item No-3) in underground trench 460 mm wide X 760 mm average depth, with brick protection on the top of the cable with 8(eight) Nos. bricks per meter , incl. filling the space between the brick & cable and also the trench with shifted soil , leveling up and restoring surface duly rammed.

Laying of above mentioned cable on wall after cutting the wall and making The hole including embedding the cable at average depth of 75 mm and mending good the damages to original finish including removing the rubbish

Supply & fitting fixing 74 wt. LED fixture (Model No-BRP 409 LED CW 074 MR FG S1 PSU GR if Philips or any other approved make of equivalent spec.) on the top of the pole it includes the cost of hiring of ladder and making necessary interconnection complete by supplying of suitable gauge Cu wire as per direction .

Supply & fitting fixing 40 wt. LED fixture (Cat No. 40-CDL of Crompton or other PHED approved make of equivalent spec.) as a gate light and making interconnection complete with supply of suitable gauge Cu wire as per direction EIC .

Supply & Fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof enter for 2 X 6 sq mm Al. Ar. Cable.

Finishing the end of above armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make) , tapes, anticorrosive paste & jointing materials.

Supply & fitting of distribution box made of sheet steel metal having 32 Amp. 1 no. isolator for incomer and 2 no. 10 Amp 2 way SPN MCB (Havells/Standard any other PHED approved make) on flat iron frame (Supply by agency) on wall as per direction .

Pole earthing by making supply & installation of GI Pipe electrode 50 mm dia and 3.64 mm thick X 3.04 m long including suitable gauge GI wire and other necessary materials as per GS and direction of EIC.

Painting of pole of coats of paint as given below with ready mixed paint/primer of approve make , and brand incl. preparation of surface by sand paper, cleaning etc. for receiving fresh coat of paint.

1 st coat of aluminum paint over 1 coat of RO priming

2 nd coat of aluminum paint over 1 st coat.

Supply & fixing 8" X 6" X 4" G.I. loop box with M.S. Clamp for fixing with painting as to GS.

Supply & fixing of 10A SP MCB fixing the inside of loop box

N.B.: i. MAKE AS PER PHE APPROVED VENDOR LIST AND ADDENDUM/CORRIGENDUM (IF ANY)

Add GST @18%

Add Labour Welfare Cess @ 1%

CHOWDHURY AND BASU ENTERPRISE (BID ID -6339233)

MESSRS BHOWMIK AND CO (BID ID -6328193)