8558/E8

Amount

Following unserviceable parts of existing furniture shall be removed and replaced/repaired carefully without disturbing the adjoining parts including tightening, screwing, welding, glueing, nailing wherever applicable and Work will be executed where the furniture exist (Rudrapryag and Gaucher) under jurisdiction of GE 871 EWS as directed. Charpoy Or's Steel with Ply Top Removing old unserviceable plywood of double sleeping bunk/charpoy and S&F new marine plywood of 12 mm thick BWR grade, ISI marked, Make: Archid ply/ century ply/ Green ply including fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-charge.

Removing old unserviceable stiffener & S&F new stiffener of existing size, shape all as specified and shown on drg and directed by Engineer-in-charge. All Joints duly welded/screwed as per Drgs

Removing old unserviceable long rail and S&F new long rail of existing size, shape all as specified and shown on drg .

Conversion of long rail obtained from item No 1.02 above into two numbers short rail after cutting and threading/welding both ends and fixing as per existing

Removing old unserviceable legs & S&F new legs of existing size, shape all as specified and shown on drg and directed by Engineer-in-Charge. All joints duly welded/screwed as per Drgs

Frame Shall be painted with two coats of synthetic enamel olive green. paint shall of Make Asian/Shalimar/Berger as approved by GE.

Charpoy GI pipe ( Drg No FD-220) S&F in repairs long rail made of 32 mm dia GI tubing medium grade ISI marked 1.88 metre long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy. (Make : Jindal/Ravindra/Tata)

S&F in repairs 3 way 32 mm dia GI elbow ISI marked

S&F in repairs check nuts of 32 mm dia

Conversion of 32 mm dia long rail obtained from item No 2.00 above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow.

Conversion of 32 mm dia short rail obtained from item No 18.1 above into two numbers leg including fixing to 3 way 32 mm dia at one end threaded and cover the other end with hard rubber/PVC shoe.

S&F in repairs 12 mm BWR phenol bonded commercial plywood of size 2000 mm x 900 mm including providing 50mm wide strip made out of 6mm thick plywood for filling gap between plywood sheet and short rails including replacement of bolts and nuts for fixing of plywood. Make - kit ply/Green ply/ National.

S&F in repairs MS flat of size 40x4mm with two Nos. nut & bolts as stiffner shall be fitted for support of plywood

Charpoy GI Pipe Double Bunk Removing old unserviceable plywood of double sleeping bunk/charpoy and S&F new marine plywood of 12 mm thick BWR grade in both frame, ISI marked , Make: Archid ply/ century ply/ Green ply including fixing in position all as shown on drg with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-charge.

Removing old unserviceable stiffener & S&F new stiffener of existing size, shape all as specified and shown on drg and directed by Engineer-in-charge. All Joints duly welded/screwed as per Drgs

Removing old unserviceable long rail and S&F new long rail of existing size, shape all as specified and shown on drg .

Conversion of long rail obtained from item No 3.01 above into two numbers short rail after cutting and threading/welding both ends and fixing as per existing

Removing old unserviceable legs & S&F new legs of existing size, shape all as specified and shown on drg and directed by Engineer-in-Charge. All joints duly welded/screwed as per Drgs

Frame Shall be painted with two coats of silver paint of Make of Asian/Shalimar/Berger as approved by GE.

Rack Side Steel 3 Spaces Removing old unserviceable shelves & S&F new one of existing size, shape all as specified and shown in drg and as directed by Engineer-in-charge. All Joints duly welded/screwed as per Drgs

Removing old unserviceable legs & S&F new legs of existing size, shape all as specified and shown in drg and directed by Engineer-in-Charge. All Joints duly welded/screwed as per Drgs

Frame Shall be painted with two coats of olive green paint. paint should be of Make Asian/Shalimar/Berger approved by GE.

Almirah Large Steel Removing the unserviceable lock and tighting of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown on drawing (Make - Harison/Godrej/Link)

Removing the existing unserviceable 3 way locking device and S&F new locking device with necessary fittings and painted with one coat synthetic enamel paint tiled gray shade of approved quality to match with exiting all as specified and as directed

Removing the existing unserviceable handle & supply and fix 100 mm size new chromium plated steel handle of approved quality make of Godrej all as specified and shown in drawing

Removing the existing unserviceable leg and supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted of and painted with one coat of synthetic emamel paint of silver shade of approved quality to match with existing over a coat of primer all as specified and as directed

Removing the exisiting unserviceable shelves and supply and fix new shelves made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with two coats of synthetic emamel paint of silver shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Change/repair to the exisiting unserviceable hinges and supply and fix new hinges to match the existing duly welded/riveted and painted with two coats of synthetic emamel paint of silver shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Material and labour for removing the existing dents/bends and preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coats of synthetic enamel silver shade of approved quality both inside and outside all as specified and as directed.

Almirah Medium Steel Removing the unserviceable lock and tighting of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown in drawing (Make - Harison/Godrej/Link)

Removing the existing unserviceable 3 way locking device and S&F new locking device with necessary fittings and painted with one coat synthetic enamel paint tiled gray shade of approved quality to match with exiting all as specified and as directed

Removing the existing unserviceable handle & supply and fix 100 mm size new chromium plated steel handle of approved quality make of Godrej all as specified and shown in drawing

Removing the existing unserviceable leg and supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted of and painted with one coat of synthetic emamel paint of silver shade of approved quality to match with existing over a coat of primer all as specified and as directed

Removing the exisiting unserviceable shelves and supply and fix new shelves made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with two coats of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Change/repair the exisiting unserviceable hinges and supply and fix new hinges to match the existing duly welded/riveted and painted with two coats of synthetic emamel paint of silver shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Material and labour for removing the existing dents/bends and preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying two coats of synthetic enamel silver shade of approved quality both inside and outside all as specified and as directed.

Locker Bed Side Steel FD-1029 Removing the unserviceable lock and tightening of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown in drawing Make - Harison/Godrej/Link

Removing the existing unserviceable 3 way locking device and S&F new locking device with necessary fittings and painted with two coat of synthetic enamel paint of olive green shade of approved quality to match with exiting all as specified and shown on Drg

Removing the existing unserviceable handle & supply and fix 100 mm size new chromium plated steel handle of approved quality make of Godrej all as specified and shown on Drg

Removing the existing unserviceable leg, supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed

Removing the exisiting unserviceable shelves and supply and fix new shelves made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Change/repair to the exisiting unserviceable hinges and supply and fix new hinges to match the existing duly welded/riveted and painted with two coats of synthetic emamel paint of olive green shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Removing the existing unserviceable hanging rod and supply and fix new hanging rod of stainless steel to match the existing all as specified and as directed

Removing the existing unserviceable hooks and supply and fix new hooks with nylon top on head match the existing all as specified and as directed

Material and labour for removing the existing dents/bends and preparation of old painted steel surfaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside all as specified and as directed.

Locker Steel SKD FD-562 Removing the unserviceable lock and tightening of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown in drawing (Make - Harison/Godrej/Link)

Removing the existing unserviceable 3 way locking device and S&F new locking device with necessary fittings and painted with two coat of synthetic enamel paint of olive green shade of approved quality to match with exiting all as specified and shown on Drg

Removing the existing unserviceable handle & supply and fix 100 mm size new chromium plated steel handle of approved quality make of Godrej all as specified and shown on Drg

Removing the existing unserviceable leg, supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with one coat of synthetic emamel paint of off white shade of approved quality to match with existing over a coat of primer all as specified and as directed

Removing the exisiting unserviceable shelves and supply and fix new shelves made of 1mm thick CRCA sheet to match the existing duly welded/riveted and painted with one coat of synthetic emamel paint off white shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Change/repair to the exisiting unserviceable hinges and supply and fix new hinges to match the existing duly welded/riveted and painted with two coats of synthetic emamel paint of off white shade of approved quality to match with existing over a coat of primer all as specified and as directed.

Removing the existing unserviceable hanging rod and supply and fix new hanging rod of stainless steel to match the existing as specified and as directed

Removing the existing unserviceable hooks and supply and fix new hooks with nylon top on head match the existing all as specified and as directed

Material and labour for removing the existing dents/bends and preparation of old painted steel surfaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of off white shade of approved quality both inside and outside all as specified and as directed.

Chair easy (Drg No FD-1108/229) S&F in repairs first class teak wood rear leg

S&F in repairs first class teak wood front leg

S&F in repairs first class teak wood arms

S&F in repairs first class teak wood front/back/side rail of seat as to match with the existing all as specified and directed

S&F in repairs recanning seat & back in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as specified and as directed.

Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified & directed.

Chair writing (Drg No FD-202/ 250/280) S&F in repairs first class teak wood rear leg all as specified & directed.

S&F in repairs first class teak wood front leg all as specified & directed.

S&F in repairs first class teak wood rear/front/Side rail all as specified & directed.

S&F in repairs first class teak wood arms all as specified & directed.

S&F in repairs first class teak wood back rest all as specified & directed.

S&F in repairs first class teak wood stiffener all as specified & directed.

S & F in repairs canning of seat & back of the chair and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as specified and as directed.

Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed.

Bed Hard with Ply top (Drg No FD-246/247) S&F in repairs marine ply of 12 mm thick BWR grade, ISI marked of Make: Archid ply/ century ply/ Green ply with suitable size screws & cup washers all as specified and shown on drg and directed by Engineer-in-Charge.

S&F in repairs head board of size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. All wood incarporated in head board shall be well seasoned hard wood (Teak).colour/shade of vineer sheet to be incarporated in head board shall be as directed by Engg-in-Charge /GE Make :Archid ply/ century ply/ green ply . All wood surfaces exposed to view shall be two coat of melamine polished of approved shade by GE.

S&F in repairs foot board of bed hard of existing size, shape all as specified and shown on drg and directed by Engineer-in-Charge. All wood incarporated in foot board shall be well seasoned hard wood (Teak). Colour/ Shade of vineer sheet to be incarporated in foot board shall be as directed by Engineer -in-Charge /GE of Make :Archid ply/ century ply/ green ply . All wood surfaces exposed to view shall be two coats of melamine polished of approved shade by GE.

S&F in repairs long rail of bed hard made of teak wood of existing size, shape all as specified and shown on drg. All wood surfaces exposed to view shall be two coats of melamine polished of approved shade by GE.

S&F in repairs support stiffners & short rail of bed hard of size 40mmx 60mm made of hard wood teak of existing size, shape all as specified and shown on drg and directed by Engineer-in-Charge.

S&F in repairs MS bracket of bed hard 150x35x5mm thick Flat iron "L"shape duly treated with black paint of Make: Berger/ Shalimar/ Asian of existing size, shape all as specified and shown on drg and directed by Engineer-in-charge.

M&L for preparation of old surfaces of bed hard by complete removal of existing treatment using grinding machine including filling of cavities by putty, filler, sealer and applying two coats of melamine polishing to obtain glossy finish all as specified and as directed by Enginner-in-charge.

Chair dining (Drg No FD-) S&F in repairs first class teak wood rear leg all as specified & directed.

S&F in repairs first class teak wood front leg all as specified & directed.

S&F in repairs first class teak wood rear/front/side rail all as specified & directed.

S&F in repairs first class teak wood back rest all as specified & directed.

S&F in repairs first class teak wood stiffener all as specified & directed.

S & F in repairs canning of seat of the chair and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as specified and as directed.

Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed.

Table Writing Wooden (Drg No FD-249, 275,33) Removing the existing unserviceable top of the table writing and S&F new top as to match with existing made out of 18 mm thick pre-laminated MDF board Make of century ply/grren ply/Archid ply one side laminated finish duly providing 4 mm thick teak wood beading all around all as specified and directed

Removing the existing unserviceable leg of the table writing and S&F the same with new one as to match with existing made out of teak wood all as specified and directed

Removing the existing unserviceable leg (short) of the table writing and S&F the same with new one to match with existing made out of teak wood all as specified and directed

Removing the existing unserviceable side/bottom rail of the table writing and S&F the same with new one to match with existing made out of teak wood and all as specified and directed

Removing the existing unserviceable back of the table writing and S&F the same with new one as to match with existing made out of 6 mm thick plywood commercial and all as specified and directed

Removing the existing unserviceable side of the table writing and S&F the same with new one as to match with existing made out of 18 mm thick MDF board of Make- century ply/Grren ply/Archid ply one side laminated finish all as specified and directed

Removing the existing unserviceable stiffener of the table writing and S&F the same with new one as to match with existing made out of teak wood and all as specified and directed

Removing the existing unserviceable drawer of the table writing and S&F the same with new one to match with existing made out of 18 mm thick MDF board of Make century ply/Grrenply/Archid ply one side laminated finish including provision of knob all as specified and shown on drawing. Note :- Knob shall be be aluminium anodised (Dark Brown) chromium plated of approved size and quality

Removing the old unserviceable complete cupboard from the table writing and S&F new cupboard as to match with existing made of 18 mm thick prelaminated MDF board Make of century ply/Green ply/Archid ply including back provided with 6mm thick commercial plywood all as specified and shown in drawing. Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size and quality). (b) Hinges shall be 50 mm of approved quality.

M&L for preparation of wooden surfaces of the table writing with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax all as specified.

Table Dressing Gents with mirror ( Drg No FD-379) M&L for remoiving the exising unserviceable looking mirror with frame from Table Dressing Gents with mirror and S&F the same of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror including minor repairs all as specified and directed Note : Make of Mirror should be of Modiguard/St Gobain

M&L for remoiving the exising unserviceable drawer from Table Dressing Gents with mirror and S&F new drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated MDF board one side laminated finish including provision of knob all as specified and as directed.

M&L for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for Table Dressing Gents with mirror all as specified and directed.

Table 3'X2' Steel with/without drawar Removing the existing unserviceable top of table and S&F the same made of 18mm thick pre laminated MDF board one side laminated finish including provision of 4mm thick teak wood beading all as specified and directed

Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of olive green synthetic enamel paint including four Nos of hard rubber shoes. Paint should be Make of Asian/Shalimar/Berger approved by GE.

Removing old unserviceable frame/leg, S&F new frame/leg of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. shape complete all as specified and shown on drg .All Joints duly welded/ screwed as per Drgs

Teapoy ( Drg No FD-382/ 232 & 278) Removing the existing unserviceable leg from Teapoy and S&F the same made of first class Teak wood to match with the existing and all as specifed and directed

Removing the existing unserviceable top rail (long/front) from Teapoy and S&F the same made of first class teak wood to match with the existing all as specifed and directed

Removing the existing unserviceable top rail (short/side) from Teapoy and S&F the same made of first class Teak wood to match with the existing all as specifed and directed

Removing the existing unserviceable top from Teapoy and S&F the same with new one as to match with the existing made of 18mm thick pre-laminated MDF board one side laminated with 4mm thick teak wood beading all as specified and directed Make - Archid ply/Green ply/Century Ply

M&L for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for Teapoy all as specified and directed.

Chair steel tubular with/ without arms (FD-75 M) S&F following components of chair steel tubular with/ without arms made out of first class teak wood, french polished duly plastic canned in 'Godrej' pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing including dismantling unservicable one all as specified and as directed. Seat frame

Back frame

Handle made of Teak wood duly french polished and fixed to the chair tubular with arms with screws of suitable size.

MS flat size 25x25x4mm thick welded at four corner at bottom of the seat only to support and screwed with the seat at two places.

Preparation of surfaces and painting with synthetic enamel paint OG colour to chair steel tubular with/without arms including 4 Nos of PVC bushes to the bottom of the chair frame and 2 Nos of PVC caps on the top of the frame.

Chair writing (MAP)/Steel S&F following componants of chair writing (MAP)/Steel (approved quality) including dismantling one all as specified and as directed. seat & back

Handle

M&L for painting two coats of Black paint in iron frame of chair writing (MAP)/Steel after scraping old paint/rusted parts by emery paper.

Table office officer/clerk steel (FD-84/1003,1004 ) S & F following components of Table dinning ORs steel including dismantling unservicable one all as specified and as directed. Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer.

Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer

Lock of 6 levers with duplicate keys

Side panel made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces.

Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete of following type;- (i)Table office officer

Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete of following type;- (ii)Table office Cleark

PVC shoe

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete all as specified and as directed

Table dinning ORs steel with Aluminium Top S & F following components of Table dinning ORs steel including dismantling unservicable one all as specified and as directed. (a) Leg/stiffener 25x25x1.6mm thick MS squire pipe duly welded to the frame including minor repairs to the table and painting the replaced portion.

(b) Table top made of 12mm thick BWR plywood duly coated 01 mm thick Aluminium sheet on it .

(c) Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive green shade of approved quality.

(d) PVC shoe

Rack steel 6 Tier FD-129(M)/1038 S & F following components of Rack steel 6 tier including dismantling unservicable one all as specified and as directed. (a) MS angle iron of size 30 x 30 x 3mm thick, 1905mm long including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primer.

(b) Shelves of size 760 x 915mm made of 1mm CRCA sheet including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primer.

(c )Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth and applying one coat of synthetic enamel paint of olive green shade of approved quality.

Table Dining 6/8 persons -FD-273/376 S & F following components of Table including dismantling unservicable one all as specified and as directed. (a) Leg Shall be made of first class teak wood

(b) Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete.

(c) Long rail shall be made of first class teak wood as directed

(d) Short rail shall be made of first class teak wood as directed

(e) PVC rings fixed with screw in all legs as specified

(f) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed.

STOOL STEEL S & F following components of Stool Steel including dismantling unservicable one all as specified and as directed. (a) MS angle iron of size 3mm thick, long including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primer.

(b) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth and applying one coat of synthetic enamel paint of olive green shade of approved quality.

Peg Table S & F following components of Table including dismantling unservicable one all as specified and as directed. (a) Leg Shall be made of first class teak wood

(b) Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete.

(c) Long Rail shall be made of first class teak wood as directed

(d) Short Rail shall be made of first class teak wood as directed

(e) PVC Rings fixed with screw in all legs as specified

(f) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed.

M/s MAKHAN ENTERPRISES

M/s Makhan Lal

m/s MD pandey sons

F.M. KHAN SONS