KHRWS - Supply Installation Testing and Commissioning of 40 KVA Diesel Generator set with AMF Panel at ACR Lab Vandanam Medical College, Alappuzha

Amount

Generator Installation

od234195/2024_2025 : Supply and Installation of 40 KVA Diesel Generator set including required control devices, protection such as suitable MCCB and earth fault relay using CT in neutral earthing conductor and acoustic enclosure and DG set is to be compliance with CPCB - 4 plus norms and as per technical details given below on suitable size CC foundation 1.Engine a). Make of Engine : Kirlosker/Cummins/Leyland/TATA/Echier Volvo b). Type of Engine - Diesel Engine c). No.of Cylinders - As per manufacturers standards d). Method of Cooling : Water cooled with radiator e). aspiration - Turbo charged after cooled f). Design - Suitable for generating set operation g).Output - Required HP as per manufacturers standards at 1500 rpm under NTP condition . 2.Standard accessories with Diesel Engine a). Flywheel to suit flexible coupling b). Close coupling c). Air Cleaner d). Radiator with fan provided with fan guard e). Fuel Pump f). mechanical governor g). Fuel Filter h). Lubricating Oil filter i). Exhaust silencer j). Exhaust Muffler k). Battery charging Generator 3. Engine instrumentation panel with the following items a). Starting switch with key or button b). Lubricating oil pressure guage c). water temperature gauge d). RPM indicator with hour meter e). Battery charging ammeter f). Fuel indicator 4. Safety controls for Engine a). Trip for low lubricating oil pressure b). Trip for high water temperature c). Alarm for low fuel level . 6. Brushless alternator a). Make - Stamford/LS/Cummins/KEL b). Type - Self excited and self regulated c). Capacity - 40 KVA / 32.0 KW @0.8 PF d). System of Voltage- 3 Phase , 415 V, 4 wire system e). Speed - 1500 rpm f). Voltage regulation band - +/- 5% of rated voltage g). Frequency - 50 Hz h). Insulation - Class F/H The alternator should confirm to IS 4722 and warranteed for 3 years . Operation and service manual , spares and tools shall be provided. 8. Fuel tank suitable size built in type integrated with the acoustic enclosure with full tank Diesel fuel connection shall be done as per standards . 9. Battery - Suitable capacity fully charged battery with leads and terminals of appropriate AH capacity as per manufacturers requirement. 10. Supplying and providing the standard electric control panel integrated with acoustic enclosure comprising of the following. a). 80A , 4 pole MCCB b). Digital Multifunction meter with accuracy class 1 to read parameters such as KW,PF ,voltage , current frequency etc. c). Digital type single function KWH meter with accuracy class 1 , Exhaust piping shall be vent to the top of the nearest tallest building if required.If the pipe cannot be clamped/fixed to the building or any other structure of permanent nature necessary fabricated sructures using channel section or angle iron sections of adequate mechanical strength , duly painted with 2 coats of heat retardant aluminium paint shall be provided for the support of the exhaust pipe. (Additional piping will be measured excluding the standard length of pipe supplied by the manufacturer). including arranging load test at site or company assembly unit with presence of department staff.

od234196/2024_2025 : Supply and providing 12V,15A Automatic Battery Charger suitable for 180 Ah battery having full protection against battery overcharging & reverse polarity , over voltage , overload and short circuit protection ,reverse battery protection. digital meters for voltage and current display, battery connecting terminals with lead wire, float and boost charging mode, LED indicators for charger status indication , etc and giving necessary connections as required.

od234197/2024_2025 : Charges for conducting load test of 40 KVA DG set at standardized factory bed as per standard norms and condition. i.e. in various steps load up to full load for 3 hours and 10% overload for 20 minutes and the rate includes hire and rent of test bed equipment and labour charges , loading and unloading etc. The test certificate should be given the client in standard format.

1.1.2 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B

90.6.10.1 : Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

90.10.1.3 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )3 module moulded plastic box on surface

1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

od234572/2024_2025 : Supply of HSD for full load testing of DG set including conveying and loading

od234199/2024_2025 : Providing ,laying,testing and commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/ IS 1239 including welding , fittings like elbows ,tees , flanges, tapers, nuts,bolts,gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamps/support frame and painting with two or more coats of sunthetic enamel paint of required shade complete as required : 80 mm dia

od234200/2024_2025 : Carrying out control cable for DG to panel with normal meters and indication lamps alone PVC insulated copper conductor cables 2.50 sq mm with required sockets conforming to IS 694 part 1990 for interconnecting the DG control devices/ equipments including providing suitable size insulated sockets at the termination points or soldered properly , providing numbering ferrules for the proper identification of the wiring, keeping the wiring firm by suitable tie/tie mounts /PVC duct etc as required.

90.12.7.29 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 50 sq mm with factory made clamp

9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)

90.16.1.6 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required6.00 mm copper conductor (4 SWG)

90.16.2.4 : Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.40 mm dia G.I. pipe ( medium class)

90.16.5.6 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.6. mm ( 4 SWG)

od234222/2024_2025 : Providing and laying in position cement concrete 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size ) in foundation of DG set and including from work etc as required.

od234223/2024_2025 : Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift up to 1.5m including getting out the excavated soil and disposal of surplusexcavated soil as directed, within a lead of 50 meters

od234226/2024_2025 : Charges for preparing plan, electrical schematic diagram, etc. for getting approval from electrical inspectorate etc. (Actual amount will be re - imbursed on production of documentary evidence.

od234227/2024_2025 : Supply and providing 9 liter capacity GI fire bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work /wall bracket filled with fine sand, painting the bracket / floor stand including making good the damages , colour washing etc as required.

od234228/2024_2025 : Supply and providing first aid chart duly framed and placed in a conspicuous location for clear vision

od234231/2024_2025 : Aluminium anodised Danger Notice Board of size 200 x 150 mm. with inscriptions ( both in English and Malayalam) and conventional Skull and Bone in Red colour.

90.14.5 : Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

od234250/2024_2025 : Supply,conveyance and installation of AMF panel using 1.6 mm CRCA sheet neatly painted with 2 coat synthetic enamel paint suitable for 40 KVA DG set with all standard control accessories including 2 Nos 100A MCCB,100A L&T MCX contractor , contractor add on blocks, Mechanical interlock, LED indication lamps, 4 pole terminal connector SPMCB s etc.as required.

od234251/2024_2025 : Supply and providing 2.5mm thick Elastometric fire retardant insulating mat as per IS 15652/2006 to withstand 11 KV dielectric strength including fixing with suitable synthetic adhesive.

od234252/2024_2025 : Supply and providing 5/6 Kg dry chemical powder type fire extinguisher with accessories fixed on wall in position.

od234253/2024_2025 : Charges for preparation of Electrical drawing per A3 sheet first copy

od234254/2024_2025 : Copying charges of Electrical drawing per A3 sheet additional copies

od234306/2024_2025 : Providing corrugate G.S sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks , bolts and nuts 8 mm diameter with bitumen and GI Limpet washers filled with white lead , including a coat of approved steel primer and two coats of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gm/m2 .

od234307/2024_2025 : Providing ridges or hips of width 60 cm overall width plain or G.S sheet fixed with polymer coated J or L hooks , bolts and nuts 8 mm dia GI Limpet and bitumen washers complete o.63 mm thick with zinc coating not less than 275 gm/m.

od234308/2024_2025 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing position and applying a priming coat of approved steel primer , including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.

od234309/2024_2025 : Supply and providing 80mm diameter medium class GI pipe.

od234310/2024_2025 : Supply and providing TMT steel mesh for DG foundation.

od234311/2024_2025 : Providing brick work (in width 225 mm or more ) with F.P.S bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand ) at all levels.

od234312/2024_2025 : Providing 15 mm thick cement plaster of mix 1:4(1 cement : 4 fine sand) at all levels

Mahesh KR (BID ID -2207871)

Bidder Name

Power Care Electrical

Mahesh KR