Rate contract for the Installation of various types of Traffic Signals Road Warning Blinkers and LED Street lights

Amount

ITEM No.: 1. SUPPLY OF MATERIALS 1. Supply of PVC pipe a) 2" (50mm) dia

b) 3" (75mm) dia

c) 4" (100mm) dia

2. Supply of GI pipe (ISI) Class B a) 1.5" (38mm) dia

b) 2" (50mm) dia

c) 3" (75mm) dia

d) 4" (100mm) dia

3. Supply of 8 SWG GI wire for overhead cabling

4. Supply of 14 SWG GI wire for earthing

5. Supply of Cable glands 20mm/25mm/30mm suitable for cable termination in Controller

6. Supply of HDPE pipe (As per IS:4984:1995) a) 2" (50mm) dia

b) 3" (75mm) dia

c) 4" (100mm) dia

ITEM No.: 2. CIVIL WORK 7. Excavation of trench and refilling the same after laying GI/PVC pipe of various diameter a) Soft cutting 1' x 0.5'

b) Semi Hard cutting 1' x 0.5'

c) Hard cutting (carriage way/rock surface) 1' x 0.5'

8. Excavation of trench and refilling the same (without pipe laying) a) Soft cutting 1' x 0.5'

b) Semi Hard cutting 1' x 0.5'

c) Hard cutting (carriage way/rock surface) 1' x 0.5'

9. Restoration Charges including material cost for excavated portion of the carriage way with 1:2:4 PCC

10. Asphalting and Restoration Charges including material cost for excavated portion of the carriage way

11. Excavation of RCC/PCC surface including island median etc.

12. Trenchless horizontal drilling under the road surface including laying of HDPE pipe of dia a) 2" (50mm) dia

b) 3" (75mm) dia

c) 4" (100mm) dia

13. Slot cutting 40mm width 200mm depth (saw cut) on carriage way for laying of control cable where standard excavation is not permitted. This is inclusive of slot cutting, slot cleaning bedding of control cable and refilling with PCC/ hot bitumen seal

14. Slot cutting 4mm width 20 mm depth (saw cut) on carriage way for laying of loop cable for vehicle sensor placement or any other purpose. This is inclusive of slot cutting, slot cleaning, bedding of loop cable and refilling with hot bitumen seal /cold sealant

15. Laying of PVC/GI pipe of various diameters in trenches (1' x 0.5')

16. Construction of controller plinth size 70cm x 50cm x 75cm (single brick construction with plastering on outside surface with 1:6 cement mortar, fixing of controller mounting frame with 4 Nos. of M 10 x 120mm bolts and painting two coats golden yellow paint with black stripes over a coat of cement primer etc. all complete

17. Supply & Installation of Name Board on Plinth: Black granite of Size – 12mm thickness & Dimensions – 600mm x 450mm engraved with the matter informed and painted with golden paint

18. Construction of foundation and basement for battery box (8 Nos. of battery) of size 60cm x 60cm x20cm with brick in 1:6 Cement mortar including plastering all around top for fixing battery box and painting two coats golden yellow paint with black stripes over a coat of cement primer etc. all complete

19. Construction of foundation and basement for battery box (2 Nos. of battery) of size 30cm x30cm x20cm with brick in C:M 1:4 including plastering all around top for fixing battery box and painting two coats golden yellow paint with black stripes over a coat of cement primer etc. all complete

20. Erection and painting with two coats of Golden yellow paint/Silver of single cantilever pole over foundation specification enclosed including the base and painting two coats golden yellow paint with black stripes on base all complete

21. Erection and painting with two coats of Golden yellow/Silver paint of single cantilever pole with 4/2 SPV Panels as per foundation specification enclosed including construction of the base and painting two coats of golden yellow paint with black stripes over a coat of cement primer on base all complete

22. Erection and painting with two coats of Golden yellow/Silver paint of 6 mtr. long pole as per foundation spec including construction of the base and painting two coats of golden yellow paint with black stripes over a coat of cement primer all complete

23. Erection and painting with two coats of Golden yellow/Silver paint of 7/9 mtr long pole with 4/2 SPV panels as per foundation spec including construction of the base and painting two coats of golden yellow paint with black stripes over a coat of cement primer all complete

24. Assembly of 1Mtr long Solar panel frame to standard pole/Cantilever Pole

25. Assembly of 3Mtr long Solar panel frame to standard pole

26. Fixing of Solar panel on Panel frame (per panel)

27. Fixing of controller on a) Pole

b) Plinth

28. Fixing of meter box/junction box

29. Fixing of Digital Count Down a) On Standard Pole/Cantilever Pole bottom portion Clock

b) On Cantilever Pole overhang

30. Fixing of Vehicle Sensing Camera a) On Standard Pole/Cantilever Pole bottom portion

b) On Cantilever Pole overhang

31. Assembly of signal heads 2/3/4/5 aspects -per set

32. Mounting of assembled signal heads 2/3/4/5 on a) Standard Pole/CL Pole Bottom

b) On Overhang of Cantilever Pole

33. Fixing of Pole Cap on Standard Pole /Cantilever pole

34. Fixing of Keltron logo / Name plate on pole

35. Construction of Circular foundation of 2 mtrs. dia at the bottom of the pole

36. Construction of circular barrier platform of dia 2 mtrs and height 1 mtr. with cement concrete 1:2:4 using 20mm metal and plastering all around the surface and top including 2 coat of golden yellow paint with black stripes over a coat of cement primer

ITEM No.: 3. ELECTRICAL WORK 37. Cable laying charges a) 2/3/4 core armoured/unarmoured

b) 6 core armoured/unarmoured

c) 12/14 core armoured/unarmoured

38. Laying of overhead cable with 8 SWG GI wire through pipes, poles and looping etc. including handling charges complete. Running length of bunch of cable tied to 8SWG GI wire properly tied at a height of not less than 7 mtrs. from road surface

39. Pole wiring charges a) On Standard Pole

b) On Cantilever Pole

40. Wiring of signal aspects and interconnecting the aspects on assemblies

41. Earthing as per specification (KSEB standard) a) Controller/Battery Box

b) Pole

42. Fixing of cable glands in controller and glanding of cables all inclusive

43. Termination and wiring of cables in controller

44. Wiring and inter connection of Solar panel on panel frame (per panel)

45. Termination of Solar panel cables in Battery Box (per panel assembly)

46. Wiring of battery box per battery including battery handling charges and CCU wiring

47. Wiring of Digital Countdown clock

48. Wiring of Vehicle Sensing Camera

ITEM No.: 4. ERECTION OF POLES ON FOUNDATION (Erection of Traffic Signal poles by bolting on RCC foundation, including construction of RCC foundation with materials, tools, curing) 49. Construction of RCC foundation as per specification enclosed with materials, tools, curing etc. excluding reinforcement structure and bolts

50. Construction of RCC foundation as per specification enclosed with materials, tools, curing etc. including reinforcement structure and bolts

51. Bolting of Standard pole on foundation

52. Bolting of Standard pole with Solar panel attachment on foundation

53. Bolting of Cantilever pole without Solar Panel attachment on foundation

54. Bolting of Cantilever pole with solar panel attachment on foundation

ITEM No.: 5. SOLAR BLINKER [1 to 20 Nos.] 55. Assembly and Erection of 6Mtr. standard pole with 1 Mtr. long panel frame with the following diameter: a) 2.5" (50mm)

56. Assembly and Erection of 9Mtr Cantilever pole with 1 Mtr long panel frame

57. Fixing of SPV panel to panel frame (per panel)

58. Wiring and termination of cable at solar panel (per panel)

59. Fixing of Signal assembly on blinker Pole (per signal head)

60. Wiring of Signal assembly (per signal head)

61. Fixing of controller box on blinker Pole

62. Fixing of Warning Board size 2mtr long and above

63. Construction of Plinth for Pole

64. Painting with two coats of golden yellow/Silver to solar frame, pole, plinth, clamps etc. all complete

ITEM No.: 6. SOLAR BLINKER [above 20 Nos.] 65. Assembly and Erection of 6Mtr. standard pole with 1 Mtr. long panel frame with the following diameter: a) 2.5" (50mm )

66. Assembly and Erection of 9Mtr. Cantilever pole with 1 Mtr. long panel frame

67. Fixing of SPV panel to panel frame (per panel)

68. Wiring and termination of cable at solar panel (per panel)

69. Fixing of Signal assembly on blinker Pole (per signal head)

70. Wiring of Signal assembly (per signal head)

71. Fixing of controller box on blinker Pole

72. Fixing of Warning Board size 2mtr long and above

73.Construction of Plinth for Pole

74. Painting with two coats of golden yellow/Silver to solar frame, pole, plinth, clamps etc. all complete

ITEM No: 7. SOLAR STREET LIGHT (1-20 Nos.) 75. Assembly and Erection of 3" dia 6Mtr. long standard pole with 1 Mtr long panel frame

76. Assembly and Erection of 4" dia standard pole more than 6 mtr long with 1 Mtr long panel frame

77. Assembly and Erection of 8 to 10 Mtr. long Octagonal pole with solar panel frame (single or double) on Foundation bolts including RCC foundation and bolting structure

78. Fixing of SPV panel on panel frame (per panel)

79. Wiring and termination of cable at solar panel (per panel)

80. Fixing of LED luminaire on bend and fixing on pole

81. Pole wiring charges including drawing of cable through pole

82. Wiring of LED Luminaire

83. Fixing of battery box on Pole

84. Construction of foundation and basement for battery box of size 30cm x30cm x20cm with brick in C:M 1:6 including plastering all around top, fixing of battery box and painting two coats golden yellow paint with black stripes over a coat of cement primer etc. all complete

85. Wiring of Battery box including CCU and battery

86. Construction of Plinth for Pole

87. Painting with two coats of paint of suitable colour on solar frame, pole, plinth, clamps etc. all complete

88. Fixing and wiring of conventional powered LED luminaire on existing KSEB pole excluding KSEB supervision charges (suitable clamp will be provided by KELTRON)

89. Fixing and wiring of conventional powered LED luminaire on existing KSEB pole including KSEB supervision charges (suitable clamp will be provided by KELTRON)

90. Transportation of Materials at site

ITEM No.: 8. SOLAR STREET LIGHT (above 20 Nos.) 91. Assembly and Erection of 3" dia 6 Mtr. long standard pole with 1 Mtr long panel frame

92. Assembly and Erection of 4" dia standard pole more than 6 mtr long with 1 Mtr. long panel frame

93. Assembly and Erection of 8 to 10 Mtr. long Octagonal pole with solar panel frame (single or double) on Foundation bolts including RCC foundation and bolting structure

94. Fixing of SPV panel on panel frame (per panel)

95. Wiring and termination of cable at solar panel (per panel)

96. Fixing of LED luminaire on pole

97. Pole wiring charges including drawing of cable through pole

98. Wiring of LED Luminaire

99. Fixing of battery box on Pole

100. Construction of foundation and basement for battery box of size 30cmx30cmx20cm with brick in C:M 1:6 including plastering all around top, fixing of battery box and painting two coats golden yellow paint with black stripes over a coat of cement primer etc. all complete

101. Wiring of Battery box including CCU and battery

102. Construction of Plinth for Pole

103. Painting with two coats of paint of suitable colour to solar frame, pole, plinth, clamps etc. all complete

104. Fixing and wiring of conventional powered LED luminaire on existing KSEB pole excluding KSEB supervision charges (suitable clamp will be provided by KELTRON)

105. Fixing and wiring of conventional powered LED luminaire on existing KSEB pole including KSEB supervision charges (suitable clamp will be provided by KELTRON)

ITEM No.: 9. MINI MAST LIGHT SYSTEMS (1-10 Nos.) 106. Assembly and Erection of 4" dia 6Mtr. long standard pole with mast assembly with: a) 3 Nos. of LED luminaires

b) 4 Nos. of LED luminaires

c) 6 Nos. of LED luminaires

107. Assembly and Erection of 4" dia 8Mtr. long standard pole with mast assembly with: a) 3 Nos. of LED luminaires

b) 4 Nos. of LED luminaires

c) 6 Nos. of LED luminaires

108. Assembly and Erection of 8 to 10 Mtr. long Octagonal pole on Foundation bolts including RCC foundation and bolting structure with mast assembly with: a) 3 Nos. of LED luminaires

b) 4 Nos. of LED luminaires

c) 6 Nos. of LED luminaires

109. Fixing of LED luminaire on mast arm

110. Pole wiring charges including drawing of cable through pole

111. Wiring of LED Luminaire

112. Wiring & Fixing of Junction Box on Pole

113. Construction of foundation and basement for standard pole of size 30cmx30cmx20cm with brick in C:M 1:6 including plastering all around top, painting two coats golden yellow paint with black stripes over a coat of cement primer etc. all complete

114. Painting with two coats of paint of suitable colour on standard pole, mast & clamps etc. all complete

115. Availing new KSEB Electric Connection at Pole Point excluding KSEB statutory payments (KSEB charges will be paid extra on producing the actual receipt from KSEB)

116. Earthling of Pole as per specification

ITEM No.: 10. MINI MAST LIGHT SYSTEMS (above 10 Nos.) 117. Assembly and Erection of 4" dia 6Mtr. long standard pole with mast assembly with: a) 3 Nos. of LED luminaires

b) 4 Nos. of LED luminaires

c) 6 Nos. of LED luminaires

118. Assembly and Erection of 4" dia 8Mtr. long standard pole with mast assembly with: a) 3 Nos. of LED luminaires

b) 4 Nos. of LED luminaires

c) 6 Nos. of LED luminaires

119. Assembly and Erection of 8 to 10Mtr. long Octagonal pole on Foundation bolts including RCC foundation and bolting structure with mast assembly with: a) 3 Nos. of LED luminaires

b) 4 Nos. of LED luminaires

c) 6 Nos. of LED luminaires

120. Fixing of LED luminaire on mast arm

121. Pole wiring charges including drawing of cable through pole

122. Wiring of LED Luminaire

123. Wiring & Fixing of Junction Box on Pole

124. Construction of foundation and basement for standard pole of size 30cmx30cmx20cm with brick in C:M 1:6 including plastering all around top, painting two coats golden yellow paint with black stripes over a coat of cement primer etc. all complete

125. Painting with two coats of paint of suitable colour on standard pole, mast & clamps etc. all complete

126. Availing new KSEB Electric Connection at Pole Point excluding KSEB statutory payments (KSEB charges will be paid extra on producing the actual receipt from KSEB)

127. Earthing of Pole as per specification

ITEM No.: 11. LED STREET LIGHT 128. Fixing and wiring of conventional powered LED luminaire on existing KSEB pole including KSEB supervision charges (suitable clamp will be provided by KELTRON)

129. Dismantling & Transportation of old Street Lights and subsequent Fixing & wiring of conventional powered LED luminaire on existing KSEB pole including KSEB charges

130. Transportation of Materials at site

ITEM No.: 12. ADDITIONAL WORK FOR REPAIR & MAINTENANCE OF TRAFFIC SIGNAL 131. Labour Charge (day time) / person

132. Labour Charge (night time) / person

133. Crane Charge

134. Transportation of Tools (Trivandrum)

135. Transportation of Tools & Labour (Outside Trivandrum)

136. Paint for Poles and Controller (Including brush and Turpentine etc.)

137. Material for fixing one Standard Pole (Including auto, loading and unloading etc.)

138. Material for fixing one Cantilever Pole

139. Material for fixing Controller / Battery box

140. Breaker Charge

NELLISSERIL GROUP