Construction of Government Arts College at village Kwant Tal. Kawant Dist. Chhotaudepur (Fire Safety line system)

Name of Work :- Construction of Government Arts College at village Kwant Tal.

Kawant Dist. Chhotaudepur (Fire Safety line system)

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

A Supplying, installation, testing and commissioning of electric driven 2.00 No. 116378.26

pressurisation pump suitable for automatic operation and consisting

of following, complete in all respects, as required : (Jockey Pump)

Horizontal type, multistage, centrifugal pump of cast iron body and

bronze impeller with stainless steel shaft, mechanical seal

conforming to IS : 1520. Suitable HP squirrel cage induction motor

TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC

supply with IP 55 class of protection for enclosure, horizontal foot

mounted type with Class-'F' insulation, conforming to IS : 325. M.S.

fabricated common base plate, coupling, coupling guard, foundation

bolts etc. as required. Suitable cement concrete foundation duly

plastered and with anti vibration pads. 3.1 300 lpm at 56 m Head

2 Fabrication, supply, Installation testing & commissioning of Electrical 1.00 No. 122210.00

control panel of automatic operation of pump, complete as per

3 Supply, erection, testing and commissioning of heavy duty M.S. C

Class pipe line as per relevant IS along with fitting like sockets,

bend, elbows, tees, plugs, nipple, flanges, reducer etc. for pump

room & 1 coat yellowxide, 2 coat PO red colour

c 80 mm dia. 96.00 Rmt 1903.85

e 25 mm dia. 150.00 Rmt 751.44

4 Wrapping & coating of Underground pipe with 4mm damar coat for 120.00 Rmt 353.50

pipe coating etc. suitable for pipe size 100 mm dia.

5 Supplying, fixing, testing and commissioning of butterfly valve of PN

1.6 rating with bronze / gun metal seat duly ISI marked complete

with nuts, bolts, washers, gaskets and conforming to IS 13095 of

following sizes :

6 Providing, installation, testing and commissioning of non-return

valve of following sizes confirming to IS : 5312 complete with rubber

gasket, G.I. bolts, nuts, washers etc. as required :

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

7 Supply, Installation, Testing and Commissioning of Gun Metal Air 4.00 No. 1767.50

Release Valve with necessary fittings. Size: 25 mm dia.

8 Supply, Installation, Testing and Commissioning of 100 mm dia. 4.00 No. 1767.50

Pressure Gauge (for all pipes) of range 0 - 15 Kg/cm² conforming to

IS - 3624 having bourdon tube of stainless steel 310 in cast

aluminium, stove enameled, black, weather proof case with outer,

screwed aluminium bezel and complete with necessary U-type

stainless steel siphon tube and cock including providing suitably

painted angle iron support to the tube etc. as per required.

9 Providing and fixing of pressure switch in M.S. pipe line including 3.00 No. 2782.55

connection etc. as required.

10 Pump house Cabling : Providing, fixing, testing & commissioning of

8 Sq.mm. 3 Core Alluminium Armoured Cable of required size from

50 Sqm 4 Core 150.00 Rmt 1767.50

16 Sqm 3 Core 150.00 Rmt 1212.00

4 Sqm 3 Core 100.00 Rmt 353.50

1.5 Sqm 2 Core 200.00 Rmt 90.90

11 Supplying and fixing Single headed internal Fire Hydrant Valve with 16.00 No. 6200.39

instantaneous stainless steel coupling of 63mm dia. with cast iron

wheel ISI marked conforming to IS:5290 (Type-A) with blank cap

and chain required.

12 Supplying and fixing of 63 mm dia. Gun metal short branch pipe with 16.00 No. 2440.16

20 mm nominal internal diameter size nozzle conforming to IS

suitable for instantaneous connection to inter connect hose pipe

coupling as required. Gun metal.

13 Supplying and fixing of 63 mm dia., 15 m long RRL hose pipe with 32.00 No. 5254.02

63 mm dia. male and female coupling duly bound with G.I. wire,

rivets etc. conforming to IS 636 (Type-A) as required. Gun metal.

14 Supplying, Installation, Testing and Commissioning of Weather 16.00 No. 3535.00

proof Standard Fire Hose Cabinet wall mounting type (750 mm x

600 mm x 250 mm deep) having single or double opening with

necessary locking arrangement by allan key suitable for housing

nos. hose pipe, 1 no. branch pipe & nozzle spanner.

15 Supplying and fixing of Fire brigade connection of cast iron body 2.00 Set 6809.42

with gun metal male instantaneous inlet couplings complete with

cap and chain as required for suitable dia. M.S. pipe connection

conforming to IS:904 as required : 2 way 100mm.

16 Supply and fixing First Aid Hose Reel with M.S. construction spray 6.00 No. 12193.73

painted with P.O. red, conforming to IS:884 complete with the

following as required. 20mm nominal internal dia. water hose

thermoplastic (textile reinforced) type-2 as per IS:12585, 20mm

nominal internal dia. gun metal globe valve and nozzle, drum and

brackets for fixing the equipment on the wall. Connection from riser

with 25mm dia. stop gun metal valve & MS pipe and socket. 40 mtr.

17 Fire Alarm and Detection System

a FIRE DETECTION SYSTEMS :- Supply, installation, testing and 120.00 No. 1262.50

commissioning of smoke detector with bullin LED and mounting

base complete with all connections etc. as required.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

b Supply, Installation, Testing & Commissioning of Manual Call boxes 20.00 No. 405.71

of MS construction in surface / recess with stainless steel chain &

hammer assembly complete with glass and push button etc. as

c Supply, Installation, Testing & Commissioning of Fire alarm sounder 10.00 No. 476.75

with facility to make announcement, mounted in M.S. box (16 SWG)

with hinged cover plate & suitable for operation with amplifier I/C line

matching transformer etc. complete as required.

d Supply, installation, testing and commissioning of sector panel 4.00 No. 7588.69

suitable for following zones, complete with visual indications for

short circuit fault, open circuit fault, fire condition and all other

standard facilities as per IS:2189 with mimic diagram for all area /

zone covered complete with all connections, inter connections etc.

as required (4 zone)

e Supplying and laying of 2 x 1.5 sq.mm fire alarm armoured cable 4200.00 Rmt 148.08

600 / 1000 V rated with annealed copper conductor having XLPE

insulation, steel wire armouring & FRLS outer sheath complete as

18 Providing, fixing, testing & commissioning of 15mm dia. quartxoid 75.00 No. 527.22

bulb type sprinklers of rating 68 degree centigrade with required

accessories : Pendent sprinkler.

19 Providing & fixing photo luminescent Signage's as per IS standard in 1020.00 No. 12.12

Block / Small Letters on rigid sheet with necessary wall or Ceiling

fittings as specified Sizes : For Fire Extinguisher, Exit, Do not to do

20 Supply, installation, testing and commissioning of ABC type 6 kg. 30.00 No. 2575.50

confirm to IS:15683, with ISI marked / TAC approved fitted with

required accessories including wall suspension brackets.

21 FIRE EXTINGUISHER 30.00 No. 4878.82

Supply, installation, testing and commissioning of Carbon Dioxide

(CO2) type Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI

marked / TAC approved fitted with required accessories including

wall suspension brackets.

22 Supply, installation, testing and commissioning of Modular ABC type 6.00 No. 1369.49

5 kg. confirm to IS:15683, with ISI marked / TAC approved fitted

with required accessories including wall suspension brackets.

23 Supply, installation, testing and commissioning of Stainless Steel 30.00 No. 1155.51

Ball Valve. (a) 25mm dia.

24 Providing core cutting for beam & slab upto 25mm to 100mm dia. 30.00 No. 855.93

directed by Engineer in charge.

25 Supplying, Installing, Testing & Commissioning of M.S. structural 1800.00 Kg 81.32

26 Supply, Installing, Testing and Commissioning of C.I. heavy duty 2.00 No. 10472.33

foot valve with flanges, nut bolts, gaskets etc. with necessary

complete accessories. 100 mm dia.

27 3 layer PVC Storage Tank 20000 ltr. installation with all accessories 1.00 Set 237350.00

like M.T., L.T., Band, Clamp, Solution and plumbing charges

including as per MR.

28 Fire drawings, layouts as required to be submitted. 1.00 Job 101000.00

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

29 Providing demonstration, training and final checking of fire fighting 1.00 Job 101000.00

system and preparing documentation work and affidavit AMC with

notarization and submitting department, follow upto receive NOC.

30 Fire bucket stand (4 nos. bucket) and fire bucket with all fittings 10.00 Set 3893.55

i.e. Rs. Fourty Nine lacs Thirty Two thousand Six hundred Seventy Nine and Eighty paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items

where there is a change as per actual mix design the cost of difference of cement consumption have

been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by

me and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Chhotaudepur (R & B) Sub Division, Chhotaudepur (R & B) Division, Chhotaudepur (R & B) Division,

Chhotaudepur Chhotaudepur Chhotaudepur