Tender For Construction of Community hall charitan village balugang Nagar pallika Mussoorie

15.3 Demolishing R.C.C work manualyy/by mechanical means including stacking of steel bars and disposal of unserviceble material within 50 metres lead as per direction of Engineer-in-change

15.25 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceble material within 50 metres lead.

15.9 Dimolishing stone rubble masonry manually/by mechanical meansincluding stracking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge 15.9.2 in cement mortar

2.6 Earth work in excavation by mechanical means(Hydrulic excavator)/manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. 2.6.1 All kind of soil.

Disposal, Dismantiling & excavated material(M.R)

4.1 providing and laying in position cement concrete of specified garde excluding the cost of centering and shuttering-All work up to plinth level :4.1.8(1 Cement:4 Coarse sand(Zone-III):8 graded stone aggregate 40 mm normial size)

5.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars,piers, abutments,posts and structs etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:5.2.2 1:1:2( 1 Cement:1.5 coarse sand(ZoneIII) : 3 graded stoneaggregate 20 mm nominal size)

5.15 Providing, hoisting and fixing above plinth level up to floor five level precastreinforced cement concrete in lintel, beams and bressumers, includingsetting in cement mortar 1:3( 1 cement:3 coarse sand), cost of reinforcement, with 1:1:2( 1 cement:1.5 coarse sand(zoneIII): 3 graded stone aggregate 20 mm nominal size)

5.9 centering and shuttering including strutting,propping etc. and removal of form for: 5.9.6 Foundation, footings, bases of columns, etc for mass concrete.

5.9.6 Columns, Pillars, Piers, Abutments, posts and stucts

5.9.6 Lintels, beams, plinth beams, girders, bressumers and cantilevers

5.9.3 Suspended floors, roofs, landings, balconies and acess platform

12.41 providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes(weepholes)

5.22 Steel reinforcement for R.C.C. Work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more

6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix 1:6 (1 cement : 6 fine sand) (13.1.2) DSR-

1-4 Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, inbreast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction (4080.40* .12=489.65(4080.40+489.65=4570.05)

2-1 Cement plum Masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for propercomoletion of the work. As per drawings and technical specifications Clause 802,803,1202 & 1203 of MORD Specifiction (with 12% G.S.T rate including) (4344.40*.12=521.33=(4344.40+521.32=4865.73)

10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required .10.25.2 in gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works

9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) .9.1.2 sal wood

9.20 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains of cross bands and face veneers on both faces of shutters 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

4.11 Providing and laying C.C floor 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone - III) : 4 graded stone aggregate 20 mm normal size

13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

13.41 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :13.41.1 New work (two or more coats) over and including waterthinnable priming coat with cement primer

13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 two or more coats on new work

13.48 Finishing with Deluxe Multi Surface paint system for interiors and exteriors using Primer as per manufacturers specifications :13.48.3 Painting Steel Work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Item Electrical Fittings Wiring point for light with 1.50 Sq. mm PVC insulated single core cable in HD PVC condute pipe on surface complete with 1.50 Sq. mm PVC insulated Aluminium conductor cable as earth continuity wire drawn inside the conduit complete in all respect. (M.R) (A) Light . Rate

(B) Tube Light. / Led Light

(c)Fan with Box. Rate / Exest Fan

(D) Plug Point Box.

(F) MCB Box

C S RAWAT

Rajendra Prasad Bangwal