TENDER FOR RENOVATION WORKS AT SAHYA FOR CYBERPARK KOZHIKODE

Amount

Removing white/ colour wash/enamel paint/existing paint by scrapping & sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall & sloped curved surface of the building

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5sqm and under,including cutting the patch in proper shape, raking out joints & preparing & plastering the surface of the walls complete, inluding disposal of rubbish to the dumping ground , all complete as per direction of engineer in charge with CM 1:4(1 cement:4fine sand)

Finishing walls with acrylic smooth exterior paint of required shade on old work(2 or more coats). Rate to be quoted including scaffolding charges at all height. Paint shade are as follows:Asian paints- A) Purple leaf 9466 B) Radiance-78933 C) OU42 Wedgewood D) 7231 Pale Orchid E)Pure Red 8093

Interior wall painting with acrylic emulsion paint of approved brand & manufacture to give an even shade- 2 coats on old work.Rate to be quoted inluding scaffolding charges at all height.Berger Paints - A) Snowbits 8P0205 B) L101-swan wing- Asian Paints

Finishing walls with textured exterior paint of required shade - 2 or more coats on old work- Burnt Yellowstone- N 4120. Rate to be quoted including scafolding charges at all height.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade (2 or more coats) RAL 9016 for fire doors

Providing & applying white cement based putty of average thickness 1mm, of approved brand & manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing with epoxy paint (2 or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate epoxy priming coat, preparation of surface, etc. complete on steel work, roof- smoke grey(0616) & black (0801). Rate including scaffolding charges also.

Cleaning of external façade of the building such as structural glazing,ACP, Kalzip sheet,louver, polycarbonate sheet, etc.,including cost of manpower, euipments,tools, cleaning materials,tackles,consumables, safety gears,ropes etc. complete. The rate quoted shall be inclusive of all duties, transportation,scaffolding etc.complete.The above mentioned surfaces to be cleaned properly with suitable cleaning materials which do not have any adverse affect on the facade.

Filling the gap in between aluminium frame/kalzip/polycarbonate sheet/structural glazing & adjacent RCC /brick work by providing weater silicon sealent over backer rod of approved quality as per the direction of engineer in charge in 5mm width and 5mm depth.

Taking out existing CC interlocking paver blocks from footpath/ central verge,including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).

Providing and laying External Vitrified tiles in ground floor external passage floor with 300mmx300mm sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, matching with existing tile shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, excluding grouting of joints. Replacing existing tile incase damaged while doing rectification, cost include removal of existing broken tile and preparing the surface for laying new tile. Johnson Endura -Dig Urbano Gris (30*30cm) tile.

Grouting the joints of flooring tiles having joints of 4 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. size of tile 300mmx300mm

Supplying & Fixing of Wall bracket aluminum signage double sided.-60 x 15cm

Supplying & Fixing of foam board signage double sided.-80 x 40cm

Supplying & providing acrylic sign board of size 300x550mm wherever found necessary as per the direction of engineer in charge

Providing and fixing panic bar single for fire doors(PHA 1000pushbar single point-1200mm).Rate inclusive of finishing in all manner.The existing handles to be removed and handed over to client

Supplying, laying and jointing hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbow, unions, etc. with clamp testing the lines rectifying any leakages or defects etc. complete as directed by the Engineer in charge for soil, waste, vent pipe,rain water etc. concealed or open at all levels in sloped roof balconies, including cost conveyance of all materials , labour charges, sundries etc. complete for internal & external work exposed on walls as directed by the Engineer in charge. 50mm dia

75mm dia

Washbasin counter- rectification work with removal and re-fixation of granite at counter top and replacement of plywood with multiwood of 18mm thick in existing MS section.

Supply and fixing of pillar cock, bottle trap,angle cock, tube connector etc., to existing washbasin in handicapped toilet.

Supply & fixing at site in position white colour vitreous wash basin with CI/MS brackets painted white, CP brass waste coupling of standard pattern, 32mm dia CP cast brass bottle trap, angle cock, basin mixer cp tube and union, connector. Oval washbasin below counter type.Rate to include all accessories for proper fixing and functioning of washbasin. Rate to include the supply and fixing of wash basin counter made of MS pipe/tube finised with epoxy paint and multi wood with granite top.

Maintenance of toughned glass door, including inspection & rectification of floor spring, top and bottom patch,alignment and speed adjustment of doors and fixing of existing centre locks with necessary silicon/sealant/fixing materials.

Rectification of horizontal and vertical blinds in ground and 1st floor of sahya building with necessary items required for rectification to ensure smooth working of same.

Rectification of structural glazing and plain window- including replacement of toughned /plain glass at damaged locations with new one matching with existing shade.Supply & installation of window handles,hooks,angles on side for smooth and proper movement of windows.The cost should include all scaffolding charges and necessary sealant applictions.

Providing & fixing precoated galvanised iron profile sheet, 0.5mm (+0.05%)total coated thickness with zinc coating 120grams /sqm as per IS :277, in 240mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet & polyster top coat 15-18 microns. Sheet should have protective guard film of 25microns minimum to avoid scratches during transportation & shoulde be supplied in single length upto 12metre as approved by the Engineer. The sheet shall be fixed using self drilling & self tapping screws of HILTI / Bosch of required diameter and length all complete with EPDM sealing washers with sealant. Rate should include cost of plastic caps of approved colour of UV resistance and button bolts, all as per manufacturers specification, ridge, piece, aprons, large boards, etc all accessories, all complete as directed by the engineer. (Includes gutter).The rate should include fixing of PVC gutter with necessary clamps,sealant application and rain water down pipe at desired locations as directed by engineer in charge.

Steel Work in built up tubular (round ,square, hollow tubes etc. )trusses, including cutting, hosting,fixing in position and applying a priming coat of epoxy primer , including welding & bolted with special shaped washers etc. complete.

Food Court Flooring Work-Polished concrete repolishing and buffing along with repair of cracks with necessary sealant/filler application.The polished concrete surface should have a premium finish with colour dye application matching to the existing shade.The surface should be grinded well and necessary stain protector sealer(Densihard/Lizo HD) should be applied and the surfae should be buffed with high speed burnisher.Cost should include shifting and placing of food court tables and chairs/furniture in proper manner at desired locations as directed by the engineer in charge.

P. P. SIRAJUDHEEN

UTECHCONSTRUCTIONS LLP

SHREE DESIGNERS

akr constructions

R. Sajikumar