Loading
Loading…
Loading…
Tender Value
₹6.2 L
EMD Value
₹12,420
Closing Date
5 Oct 2026, 5:00 pm7d left
Executive Engineer RandB Division Bandipora
Office of the Xen RandB Division Bandipora
Providing and Fixing of Wire Gauze Shutters (08 Doors and 08 Windows) in Heritage Administrative Block and Grill to three rooms
2026_PWDJK_326111_1
e-NIT No.80 of 2026-27 Dated 26-09-2026
Open Tender
Civil Works
Percentage
60 days
Bandipora
As per NIT
2 documents required · 2 mandatory
₹600
Executive Engineer RandB Division Bandipora
₹12,420
Bandipora near DC Office
26 Sept 2026
26 Sept 2026
6 Oct 2026
26 Sept 2026
5 Oct 2026
28 Sept 2026
1 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) imported Kd wood incld. carriage of material from source to site of work complete | 1.02 | Cum | 58,000 | ₹59,160 |
| 2 | Providing and fixing of 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) incld. carriage of material from source to site of work complete | 72 | Each | 207.35 | ₹14,929.2 |
| 3 | Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge First class kd wood incld. carriage of material from source to site of work complete | 174.77 | Sqm | 2,500 | ₹4,36,925 |
| 4 | Providing and fixing of hardware fittings of stainless steel with silver stain finish of approved quality and manufacture with all fittings and fixtures (Sample to be got approved from the competent authority) incld. carriage of material from source to site of work Handle 150mm | 13 | Each | 145 | ₹1,885 |
| 4.01 | Handle 125mm | 74 | Each | 130.5 | ₹9,657 |
| 4.02 | Aldrop 250X20X6 | 13 | Each | 250 | ₹3,250 |
| 4.03 | Tower Bolt 100mm | 148 | Each | 101.5 | ₹15,022 |
| 4.04 | Tower Bolt 150mm | 26 | Each | 185 | ₹4,810 |
| 5 | Engagement of Carpentar for providing a rebate in the existing Door/window wooden frames incld grooving where the wire gauge shutter fits in and proper adjusting of shutters incld necessary connection /adjustments with necessary screws as per the direction of site engineer | 6 | Each | 950 | ₹5,700 |
| 6 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture incld. carriage of material from source to site of work complete | 131.93 | Sqm | 147.05 | ₹19,400.31 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.01 MB
BOQ_1102644.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .