SPECIAL REPAIR TO BLDG NO. P-315 AT INS VALSURA, JAMNAGAR

Amount

Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc and removal of entire debris as ordered outside MD land complete all as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of entire debris as ordered outside MD land complete all as directed.

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for and removal of entire debris as ordered outside MD land complete all as directed.

Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stacking serviceable tiles at site and removal of entire debris as ordered outside MD land complete all as directed.

Dismantling wrought iron or mild steel work any description not otherwise provided for .and stacking at site complete all as directed,

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed.

All as per item 6 here-in-above, but exceeding 1.5 Sqm but not exceeding 4 Sqm each.

Taking down shutter of any description exceeding not exceeding 1 Sqm each.

All as per item 8 here-in-above, but exceeding 1 Sqm but not exceeding 2 Sqm each.

Excavating post holes or similar holes, each not exceeding 0.5 Cum getting out in hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50 mtr as directed etc complete.

Surface excavation not exc 30 cm deep and averaging 15 cm deep & geeting out in hard/ dense soil complete all as directed.

Removing excavated surplus soil to a distance exceeding 250 mts and not exceeding 500 mts and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as directed.

M&L broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface.

M&L for PCC 1:3:6, type C2 using 40 mm graded crushed stone aggregate as in foundation filling mass concrete complete all as specified and directed

M&L for providing precast cement concrete Type B1 1:2:4 using 20 mm graded crushed stone aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry),string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match Set in cement mortar 1:4 complete all as directed.

M&L for plain cement concrete 1:2:4 type B1 using 20 mm graded granite stone aggregate as in cast in situ in cills and other similar bands, plinth courses, coping, bed plates including necessary form work, weathering slightly rounded, chamfered angles and throating complete all as specified and directed.

M&L factory made pre cast PCC 1:3:6, type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks, exceeding 10 cm in width and setting in CM 1:6 complete all as specified.

M&L factory made pre cast PCC 1:3:6 type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks or slabs, 10 cm thick (plain or interlocking joints) and setting in CM 1:4 complete all as specified.

Cutting holes in brick works of size not exc half brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required including making good as per its original specification with out any extra cost complete all as directed.

Cutting chases in brick/ stone wall, pinning in, making good to facing where required and plastering in CM 1:4 to ends of edges of landing, steps, cills, lintels etc and cutting chases not exceeding 10 cm girth for concealed water tubing and making good cutting as per its original specfication complete all as directed.

Supply only Integral Water Proofing Compound (ISI Marked) of Make : CICO, Acco Proof, Impermo, Aqua flex as approved.

S&F Second class hard wood factory made kiln - seasoned, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixed in position complete all as directed.

S&F 35 mm thick second class hard wood factory made plain framed panelled door shutter (any number of panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12mm thick veneered particle boards with commercial veneering on both face the size of rail and style as per IS - 1003 (Part I) kiln seasoned and chemically pressure treated and fixed to chowkats complete all as directed.

S &F 35 mm thick second class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass, guage etc edge of framing plain chamfered or rounded fitted with cut and mitred beads and ribeted sash bars any numbers for securing guage etc size of members of shutter as specified in SSR Part I Section 8 clause 8.24 (a) supplied and fitted to chowkats.

All as per item No 24 here-in-above but divided into squares, with plain chamfered or rounded, mitred and ribeted sash bars any numbers as in window shutter 30 mm thick all as specified in SSR Part I Sec 8 Clause 8.24 (b).

S&F 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work complete all as directed.

S&F fibre glass reinforced plastic (FRP) door frames of three legged of cross section 90x45 mm having single rebate 32x15 mm to receive shutter of 30 mm thickness. The laminate door frame moulded with fire retardant grade unsaturated polyster resin and chopped mat. Door frame laminate of 2 mm thick and filled with suitable wooden block in all three legs. The frame shall be covered with fibre glass from all sides. Mild steel stay shall be provided at the bottom to steady the frame.

S&F 30 mm thick fibre glass reinforced plastic (FRP) paneled door shutter made with fire retardant grade unsaturated polyester resin moulded to 3 mm thick FRP laminated for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5 mm thick FRP laminated for panels.

S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frames and shutters for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc. complete all as directed.

S&F S&F aluminium anodised DECO grill 10mm thick DG 104 not less than 3.97Kg/Sqm fixed with necessary H/F/H channel etc complete all as specified and directed.(DECO grill fixed with windows with all fittings complete all as directed.

S&F 200 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section and fixed.

S&F 150mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section and fixed.

S&F 100 mm size stainless steel butt hinges, medium weight.

S&F 75 mm size butt hinges, medium weight cold rolled mild steel and fixed .

S&F 100 mm size butt hinges, medium weight cold rolled mild steel and fixed .

S&F 100 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.

S&F 150 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.

S&F 300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F 300 mm size mild steel ordinary rat tail rod pattern springs in-cluding roller and roller plate complete all as directed.

S&F gate and shutter, hooks and eyes, aluminium plate type II, 150 mm size.

S&F 70 mm long floor door stopper of aluminium body with rubber stud complete all as directed.

S&F brass mortice lock, vertical type of size 100mm, 4 lever.

S&F door closer aluminium (extruded section body), hydraulically regulated, designation No.3 universal type, suitale for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed complete all as directed..

S&F mild steel hold fasts of flats iron 25x5mm confirming to Fe 410-O or Fe 310-O and similar items.

S&F in repairs 25 mm dia stainless steel curtain rod with stainless steel bracket and finials of approved design including fixing of screws complete all as directed

S&F XPM design aluminium alloy wire mesh, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples along with wooden beads.

S&F in repair XPM design aluminium alloy wire mesh, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples along with wooden beads.

M&L framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

S&F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.4923 grade St.-310 complete.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fatening and heavy brackets framing (Beam, tee, angle, channel, flat section or ERW) including distance pieces, cleats, etc. IS 1161 Grade 1161

S&F plates any thickness (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes and fixed by welding as required in stairs , cable duct cover etc as instructed complet all as directed.as directed . steel conforming toFe 410-W(Gde-E- 250) quality 'A'.

S&F mild steel screw bolts of 11-15 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 5 cm but not exceeding 10 cm long complete all as specified.

S & F 10 mm dia and over TMT bars cut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item No. 54 here- in – above but 5 mm dia and over upto 10 mm dia as in stirrups

S&F pre-painted galvalume (zincalume) aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof coverings/cladding to walls fixed with self tapping screws as specified.

Dismantling of any type of ceiling boards after electrically disconnection and taking down electrial fittings & fixtures including wiring stacking at site and S&F new 10 to 12mm thick mineral fibre board fixed or laid/ inserted to aluminium frame work with screws fixed to false ceiling with and including MS powder coated snap Grid 605 x 605 mm frame work using 24mm x 32mm x 0.7mm main Tee runner to be interlocked, 24mm x 32mm x 0.75mm cross Tee and 24x32x0.70mm angles fixed to wall for ceiling including necessary supporting hanger with 4 mm dia GI (upto 2.5m long adjustable) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 24x7mm size 60mm long for securing frame work to ceiling suspended at 120cm etc. both way (Size of grid shall be 605mm x 605mm) including 10 to 12mm thick mineral fibre board as described fixing with clips etc. and ceiling board fixed as per manufacturerrs instructions and finally fixing the taken down fittings & fixtures & wiring to its orginal postion are different locations including testing on completion as ordered complete alll as directed. (Note:(i) The quoted rate is deemed to be incluvise of mineral fibre board, aluminium snap grid, susupenders complete (ii) Quoted rate shall be inclusive of taking down existing E&M fittings and wiring in ceiling if any and re-fixing the same in position, after completion of ceiling work without any extra cost to Govt.)

M&L for 25mm avg thick plain cement concrete 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) for levelling course complete all as directed.

M&L 100 mm thick PCC 1:4:8, type D2 (using 40 mm graded crushed granite stone aggregate) as in sub base, floors, pavings etc. finished fair and even complete all as specified.

M & L non-skid coloured ceramic tiles 400x400x7 to 8 mm thick (square/ rectangular), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified.

M&L glazed ceramic designer tiles any shade or pattern as approved of size 600x300x7 mm thick, on verticals surfaces, set and jointed in neat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all directed.

M&L double charged/ ultra charged vitrified ceramic tiles in light shade 800x800x10 mm thick (square/ rectangular) polished, area in floors etc. tiles laid over and including 15 mm thick screed bed in cement mortar 1 :6 set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed in floor and wall surfaces complete all directed.

All same as per item No. 62 here-in-above but as in skiting / verticals surfaces, set and jointed in neat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all directed. (Note for item No 60 to 63 : i) Quoted rate is deemed to be inclusive of cement screed/ back coat. ii) Colour of tiles shall be got appproved before incorporation in the work)

M&L 18-20 mm thick granite slab (of any type) work (table rubbed, polished) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified. (Note: Quoted rate is deemed to be inclusive of Screed bed)

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as directed.

M&L M-35 grade, 60 mm thick machine pressed, PVC moulded precast cement concrete interlocking paver blocks any shape and size with grey cement and pigment confirming to IS: 15658-2006, laid over and including 50 mm thick compacted sand cushion complete complete all as specified.(Note: Quoted rate is deemed to be inclusive of 50 mm thick compacted sand cushoning).

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work/ stone work or concrete surfaces mixed with WPC as per manufacturer instruction, and finished the surface fair and even complete all as specified and directed. (Note : WPC measured and paid separately).

M&L for rendering 15 mm thick in CM 1:6 on block masonry surfaces other than fair faces of brick work finished even and smooth without using extra cement complete all as specified.

M&L for rendering 10 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces on ceiling finished even and smooth without using extra cement complete all as specified.

Three coats of white wash on newly plastered wall surface after necessary preparation of surface complete all as directed.

Three coats of white wash on newly plastered surface of ceiling after necessary preparation of surface complete all as directed.

M&L for preparation of old surfaces of wall including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or unplastered surfaces) and applying three coat of white wash complete all as directed.

M&L for preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or unplastered surfaces) and applying three coat of white wash complete all as directed.

M&L for preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of 1 mm thick white cement based wall care putty complete all as specified.

M&L for complete removal of existing treatment and preparing old plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of 1 mm thick white cement based wall care putty complete all as specified.

M&L for preparing newly plastered or unplastered surfaces of exterior walls and applying two coats of antifungal exterior emulsion weather proof paint (Apex) oover a coat of exterior primer complete all as specified.

M&L for complete removal of existing treatment and preparing old plastered or unplastered surfaces of exterior walls and applying two coats of antifungal exterior emulsion weather proof paint (Apex) over a coat of exterior primer complete all as specified.

M&L for two coats of 1st quality synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm in width or girth including necessary preparation of new wooden surface complete all as directed.

M&L for two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation of new steel surface complete all as directed.

M&L for one coat of first quality synthetic enamel paint of any description over 10 cm in width or girth on old painted wooden surface after necessary preparation of surface complete all as directed.

All as per item No 80 hereinbefore but on old painted steel surface.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads or fixed to aluminium sections not exceeding 0.5 Sqm in each pane complete all as directed.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads or fixed to aluminium sections exceeding 0.5 Sqm in each pane complete all as directed.

S&F 3 mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.

M&L for 15 mm bore steel water tubing medium grade (ISI marked) with all new fittings (ISI marked) fixed to wall and ceiling or laid in floors in repairs complete all as directed.

M&L for 20 mm bore steel water tubing medium grade (ISI marked) with all new fittings (ISI marked) fixed to wall and ceiling or laid in floors in repairs complete all as directed.

S&F in repairs gun-metal globe or gate valves with iron wheel head screwed box and both ends for iron pipe for 20 mm bore of pipe or union complete all as directed.

S&F in repairs 15 mm bore bib taps, fancy type long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed. Make: Prayag Cat No. 6509 or equivalent in approved make.

S&F two way bib taps with health faucet with 1.2m brass flexible tube of length as ordered and wall hook mounted type chromium plated for EWC. Make: Prayag Cat No. 6509 (Two way bib cock) & No. BEA-85 (health faucet) or equivalent of approved make.

S&F in repairs 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high presure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule and fixed complete all as directed. Make: Prayag Cat No. 6702 or equivalent of approved make.

S&F in repairs 15 mm bore stop valve fancy type, cast copper alloy, chromium plated, with long shank and cup (concealed type) screwed down high pressure with cruntch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified. Make: Prayag Cat No. 6518 or equivalent of approved make.

S&F in repairs 15 mm bore angle cock with wall flange, chromium plated brass, screwed both for iron pipe or brass ferrule complete all as directed. Make: Prayag Cat No. 6510 or equivalent of approved make.

S&F in repairs brass chromium plated shower rose 125 mm dia with or wihout swivel joint, any size, including fixing to steel pipe or union.

S&F in repairs 550 mm x 400 mm size ( white) flat back, oval type vitreous china wash hand basin including cutting for and pinning ends of brackets or erecting stand, waste coupling & waste pipe complete all as directed.

S&F vitreous China squatting pan 'Orissa' pattern of size 580x440 mm white with integral foot rests water closet (Squatt pattern) including provision of lime concrete bedding with connecting to trap anti syphonage pipe etc. complete all as directed.

S&F in repairs vitreous China ware wash down water closet pan (Pedestal Pattern) (EWC), white (excluding flushing cistern and flush pipe) with fixing bolt to floor and connecting pan to trap, pedestral pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete all as directed.

S&F in repairs vitreous China ware wash down urinal, half stall type with urinal spreader, white (excluding flushing cistern, flush piep and waste pipe) complete all as directed.

S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device complete all as directed.

S&F in repairs 10 liters capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float and handle including brackets and flush pipe of polyetylene of low or high density or 32 mm dia PVC connection pipe complete all as specified.

S&F in repairs PVC connection 15mm bore and 45cm long with two Nos of brass check nuts and washers complete all as directed.

S&F in repairs PVC waste pipe of suitable length for wash hand basin and urinal complete all as directed.

S&F 100 mm size PVC (SWR) multi floor trap with grating including jonting the same with solvent cement complete all as directed.

S&F soap dish, fixed to tiled walls with plugs and chromium plated brass screws complete.

S&F in repairs 100 mm bore spun pipe, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as directed.

All as per item No 105 here-in-above but fixed to walls -do-

S&F in repairs 75mm bore spun pipe, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as directed.

All as per item No 107 here-in-above but fixed to walls -do-

S&F in repairs 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as directed.

All as per item No 109 here-in-above but 75 mm bore bends -do-

S&F in repairs 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval acess door complete all as directed.

All as per item No 111 here-in-above but 75 mm bore bends -do-

S&F in repair 100 mm bore cast iron branch pieces, Y, tee, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval acess door complete all as directed.

All as per item No 113 here-in-above but 75 mm bore branch pieces -do-

S&F 100 mm bore cast iron branch vent cowl complete all as directed.

All as per item No 115 here -in -above but 75 mm bore branch pieces -do-

S&F 75 mm diameter of out let Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as directed.

S&F PVC (SWR) Gully trap 125/110 mm including jointing the same with solvent cement complete all as directed.

S&F 100mm dia P or S trap complete all as directed.

Dismantling of existing any type & any capacity water storage tank fixed in any description and stacking at site and S&F 500 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer colour white both inside and outside with top cover including brass float valve high pressure suitable for 20 mm bore of pipe with polythene float, fixture hoisted and fixed in position where ordered and making necessary connection and testing including dismantling existing PVC/RCC water tanks any capacity fixed in any description and stacking at site complete all as directed.

E&M Items: Taking, down carefully copper/ aluminium point wiring (Light, Fan, socket or power) complete (fittings such as switches, celling roses, pendants, regulators, sockets, DB's) etc all as specified and directed.

M&L for concealed type point wiring with 1100 V, 1.5 Sqmm single core PVC FRLS insulated unsheathed cable, copper conductor multistranded passing through including PVC concealed conduit 20mm, concealed MS box/ PVC/ MS/ Cast Iron box and logic modular whtie plates of suitable as required at site with PVC insulated unsheathed stranded copper of size 1.5 sqmm earth copper cable, for one light point, bell point, fan point controlled by one switch including cutting and making good surface of walls applying suitable painting as required all as directed.

All as per item No. 122 here-in-above, but for 6 Amp (2/ 3 pin), modular switch socket in same board with earth wire 1.5 Sq.mm PVC insulated multistranded copper conductor cable complete all as directed.

All as per item No.122 here-in-above, but for 6 Amp (2/ 3 pin), modular switch socket in independent board with earth wire 1.5 Sq.mm PVC insulated multistranded copper conductor cable all as directed.

All as per item No. 122 here-in-above, but size of cable 2.5 Sq.mm for 16 Amp and 6 Amp (3 pin) combined, modular switch socket in independent board with earth wire 2.5 Sq.mm PVC insulated multistranded copper conductor cable all as directed.

S&F in repair Modular switch 1 way 6 Amps,1 module all as specified and direced.

S&F in repair Modular switch 1 way 16 Amps,1 module all as specified and direced.

S&F in repair Modular Socket 6A -2/3 pin combinaed 2 Module all as specified and directed.

S&F in repair Modular Socket 16A -2/3 pin combinaed 2 Module all as specified and directed.

S&F in repair Ceiling rose surface bakelite White/ Ivory/ Urea finish 50 mm dia three terminals including supply and fix PVC square mounting block complete all as specified and directed.

S&F TV socket out let 1 module. Make: Legrand Cat Part No. 6755 46 or equivalent in Havells/ L&T/ ABB

S&F RJ 11 Telephone socket 1 module. Make: Legrand Cat part No. 6755 41 or equivalent in Havells/ L&T/ ABB

M&L For metal fluh boxes concealed for mounting concealed for mounting TV/ Telephone socket etc including logic modular plates and surrounds of suitable size complete all as directed. Make: Legrand Cat No. 6890 60 or equivalent in Havells/ L&T/ ABB

S&F Rigid non-metallic PVC conduit exclusive of boxes ( junction/ terminal) but inclusive all tees, bends, elbows, reducers and fixing accessories such as couplers lock nut saddles pipe hooks etc complete siz of 20mm.

S&F Step type electronic fan regulator modular type 120W, 2 Module

Taking down existing light fittings fixed in any description and S&F new 20 Watt wall mounted 4 ft glaze LED batten CCT(K) 6500 high quality design aluminium extruded with decortive and caps fixed as per manufacturers instructions and making necessary electrical connections and testing on completion complete all as directed. Make: Jaquar Cat No. LGLZ01X024XC 24 W CCT 6500 or equivalent of Bajaj / Crompton / Philips / Wipro/ Havells.

Taking down existing light fittings fixed in any description and S&F new 10 Watt wall mounted 2 ft glaze LED batten CCT(K) 6500 high quality design aluminium extruded with decortive and caps fixed as per manufacturers instructions and making necessary electrical connections and testing on completion complete all as directed. Make: Jaquar Cat No. LGLZ01X010XC 10 W CCT 6500 or equivalent of Bajaj / Crompton / Philips / Wipro/ Havells.

Taking down existing any type of light fittings fixed in any description and S&F new LED Recess/ Pendant mounted LED light fittings 36 Watts made from extruded aluminium housing frame (2ftx2ft) the CCT should be between 3000k fixed as per manufacturers instructions and making necessary electrical connections and testing on completion complete all as directed. Make: Jaquar Model Sauver(Panels), Cat No. LSVR01SO36XW or equivalent of Bajaj/ Crompton/ Philips/ Wipro/ Havells.

Taking down and refixing the same after repair work LED 25W security light/ street light fitting in aluminium die cast housing with glass cover & lens complete all as directed.

Taking down and refixing the same after repair work 32mm size and suitable bend GI bracket for street light fitting hold by saddle include all accessories to fix on corner of the building complete all as directed.

S&F 1400 mm sweep, ceiling fan with all accessories 230 V, SP with provision of 3 core cable from ceiling rose to fan complete in fan hook including taking down old fan complete all as specified. Make: Bajaj Model No. Kessle 50 ISI 1400 mm White CF or equivalent in Havells/Khaitan/ Usha/ Orient) Note: Old ceiling fan shall be deposited in the AGE E/M store yard.

M&L for making arrangements for Fan hook of standard type as per SSR specification including cutting RCC slabs to the required depth upto existing MS bars tie up with new one and making good disturbed surfaces complete all as specified and as directed.

S&F 300mm sweep metal Body Exhaust Fans AC single phase 230/ 240 V of size including making provision of hole of requisite size in round shape in existing wall of any type and grounting the foundation bolts of required size and making good the disturbed surfaced with PCC 1:2:4 and CM 1:6 as required duly painted with new paint matching with existing shape complete all as directed. Make: Bajaj Model No. Supreme Plus 300 mm 900 rpm Ind EX Fan or equivalent in Khetan/ Havells/ Orient.

S&F Single pole sheet metal enclosure with a two pin and earth plug and socket complete 240V with one single pole MCB 20 amp all as specified and directed by Engr-in-Charge

S&F sheet metal enclosures for DB's double door in wall / nitch when MCB's to be used Triple pole and neutral, 4 way,415 Volt with 200 Amps rated Bus bar complete all as specified and directed.

S&F sheet metal enclouser for DB'S in wall / Nitch when MCB's to be used Single pole and neutral, 8 way, Double door 240 Volt with 200 Amps rated Bus bar complete all as specified and directed.

S&F in repairs MCB TPN 63 Amp, 240 V, 50 Hz, AC supply. Make: Legrand Cat No. 4086 83 or equivalent of Havells / L&T / ABB

S&F in repairs MCB SPN 32 Amp 240 V 50 Hz AC supply, 10 kA. Make: Legrand Cat No. 4086 17 or equivalent of Havells / L&T / ABB

S&F in repairs MCB SP 6 to 32 amp, 50 Hz, AC supply, 10 kA. Make: Legrand Cat No. 4085 92 to 4085 95 / Havells / L&T / ABB

Taking down existing submain wiring and M&L for concealed type submain wiring with two runs of single core 6 Sqmm PVC insulated unsheathed multi-stranded copper conductor cable drawing in and including PVC rigid medium grade conduit concealed of suitable size complete including provision of 6 Sq mm copper unsheathed cable PVC insulated as earthwire connected to earth doll inclusive of al tees, bends, elbows,reducers etc all as specified and directed. Note: 3 runs of 6 sqmm cable and one run of PVC concealed conduit shall be measured as one unit length.

Taking down existing submain wiring and M&L for concealed type submain wiring with two runs of single core 4 Sqmm PVC insulated unsheathed multi-stranded copper conductor cable drawing in and including PVC rigid medium grade conduit concealed of suitable size complete including provision of 4 Sq mm copper unsheathed cable PVC insulated as earthwire connected to earth doll inclusive of al tees, bends, elbows,reducers etc all as specified and directed. Note: 3 runs of 4 sqmm cable and one run of PVC concealed conduit shall be measured as one unit length.

Supply, laying, testing XLPE insulated screened, PVC innersheathed galvanised steel strip or wire, armoured, heavy duty LT UG electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sq.mm, 3.5 core complete all as directed.

Supply and lay 50 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/ cm2, laid in trenches as cable protection with all fittings complete all as specified.

M&L for earthing complete with galvanized steel earth plate as electrode 600x600x6 mm buried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth not less than 1.5 m below ground level connected using galvanized iron earth lead wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of GI earth lead wire protected by Gl light grade pipe 15 mm bore, including provision of concrete pit of PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) with 40 mm thick cover of RCC 1:2:4 reinforced with 8 mm dia TMT bars reinforced at 100 mm C/C both ways and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 2 m long placed on top edge of earth plate, char coal and common salt filling test point made out of 40x8 mm flange with fixing arrangement, funnel, wire mesh and earth work in any type of soil, returning, filling in and removal of surplus soil to a distance not exceeding 50 m all as per electrical Plate No. 3 of SSR Part I and connected to earth test point, complete all as specified including testing on completion.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, laying of pipe line, cable etc and getting out in .soft/ loose soil complete all as specified and directed.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mts and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as directed.

Indobuildenterprise