Periodical Maintenance to RD Road to Panpadi for the Year 2025-26

Clearing grass and removal of rubbish to adistance of 50m outside periphery of area on both sides of the road to facilitate widening of berms, disposal of the stuff including all labour, TandP articles required for the work etc.complete as per IRC specification for Road works and direction of Engineer-in-Charge.

Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified materials with in all lifts and lead etc complete as per the direction of Engineer-in-charge.

Reworking the scarified bituminous surface suitably after supplementing the base materials with sand and water compacting with PRR including hire and running charges of PRR etc complete as per direction of the Engineer-in-charge.

Laying for scraping,cleaning,the road surface,applying tack coat using bitumen and laying 37.5mm thick built up spray grouting in one layer using hard granite metal and penetration grade of bitumen in each layer with hard granite chips and keystone for spreading over and laying including fitting curing and spreading over and spreading bitumen metal and chips and rolling with PRR including running charges of PRR.Hot mix plant,Bitumen boilers and all other TandP etc complete.as per spoecification for Road and Bridge works and direction of Engineer-in-charge.

Providing and applying Tack coat with Bitumen for finished item of work using 0.3 kgs of bitumen per 1 sqm using mechanical means etc.complete as per Specifications for Road and Bridge Works and as per direction of the Engineer-in-charge

Providing 20mm open graded premix carpet using 0.27cum of 13.2mm to 5.6mm size crushed stone chipping and mini hot mix plant over prepared surface using a total quantity of 14.6 kgs of 80 100 grade bitumen per 10sqm including hand packing to proper camber and compacting with 8T- 10T power road roller,bitumen boiler for finished item of work etc.complete.as per direction of the Engineer-in-charge

Providing 6mm thickness pre-coated seal coat with 6mm size h.g.chips including cost, conveyance, royalty, taxes, lab our, and all other materials required for the work etc. complete as per direction of the Engineer-in-charge

Please Enable Macros to View BoQ information