Construction of Assam-type building on roof slab of SDJM Court building for Malkhana etc. including security grill and gate of Court building and Construction of Directional board near N.H. 31 (C) for Gossaigaon SDJM Court.

Amount

(A) Construction of Assam-type building on RCC bldg: Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels.

Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels.

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code for R.C.C. work/R.B. walling including straightening, cleaning, cutting and bending to proper sharpes and length with 20 G annealed black wire and placing in position with proper blocks, supprots, chairs, spacers etc. complete. (upto 1st floor level) (ii) Super Ductile (SD) TMT

Extra over item no 18.1.1 (a,b,c) above 4.00m every sub sequent floor...

Providing form work in ply board plank so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in situ reinforced concrete and plain concrete work in. 3.2.1.1 Foundation, footings, bases of columns, colmn etc.

Providing form work in ply board plank so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in situ reinforced concrete and plain concrete work in. 3.2.1.2. Side of the beams grade beams etc. at or below ground level.

Providing form work in ply board plank so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in situ reinforced concrete and plain concrete work in. 3.2.1.3 Flat surface such as.

Extra over item no 3.2.1 and 3.2.3 (a) for every subsequent floor.......

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20 with 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder..........and finishing of nosing.

Extra over item no.2.2.1 (1) (B) for every subsequent floor.......

Providing and laying 25mm thick cement concrete topping with proporation 1:2:4...

Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. a) TATA make Circular Hollow Section-CHS of Grade YST-310 conforming to I.S. specification 1611-1998

Providing Pre Painted Galvanized iron sheet (PPGI) at all levels including fitting and fixing with self drilling self tapping screws complete.(Roof truss, purlins etc. to be measured and paid separately.) a) TATA Blue scope/Dyna........ (iv) 0.60 mm thick

Providing Pre Painted Galvanized sheet (PPGL) accessories (Ridges/Valley/Gutter/Flashing) at all levels including fitting and fixing self drilling self tapping screws complete. TATA Blue scope/Dyna........ iv) 0.60mm thick.

Providing and fixing in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mm x 600mm x 1200mm x 600mm with main runner 38 x 24mm cross tec 29mm x 24mm & wall angle 24mm x 24mm board as per IS 14862 to be placed in a grid of G.I system duty suspended with 4mm/6mm dia G.I/M.S bar hanger fixed with steel dash fasteners of iron purlin from the roof with adjustment clip....etc. (A) Standard Ceilings of Everest make or equivalent as directed by the department. (ii) Using 6mm thick FC Board

112mm thick 1st class brick nogged wall in cement morter including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (a) In cement mortar in proporation 1:4

Extra for brick works.......

15mm thick cement plaster in single coat on single or half brick wall for interior plastering upto 1st floor level including arrises, internal rounded angles, not exceeding 80 mm in girth and finished even and smooth including curing complete as directed. A. On rough Side (b) In cement mortar 1:4

Extra over item no.6.2.1 to 6.2.3 r every subsequent floor.......

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrough, framed and fixed in position in contact with C.C or brick masonary wall including supplying fitting and fixing with M.S hold fast (40mm x 3mm x 250mm) as per design embedded in cement concrete block in proporation 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonary as directed and specified. a) With sal wood.

Providing and fitting fixing flush door shutter solid core construction with frame.. (ii) 35mm thick

Wooden planking in floor including fixing to wooden frame with iron screws complete (base of the wood frame to be measured and paid separately.) D) 38mm thick sal wood plank, butt joints.

Supplying, fitting and fixing electroceleured aluminium fittings if approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. a) Sliding door bolts (i) 300mm

Supplying, fitting and fixing electroceleured aluminium fittings if approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. b) Tower bolts (i) 300mm x 12mm

Supplying, fitting and fixing electroceleured aluminium fittings if approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. b) Cast iron sheet door handles. (iii) 150mm

Providing, fitting and fixing anodised aluminium windows and ventilator...........complete as specified and directed for all levels. (a) 3 Track sliding (iv) 6mm clear glass

Providing VITRIFIED floor tiles of approved quality specified size, shape and thickness not less than 18mm on floor.........over 15mm thick base of cement mortar in prop.1:3 with approved pigment to match shade of tiles...as approved and directed by the department. (a) Normal Range (Sonamy/Orient/Nitco/Vermor vita/marbito) (i) Of size 400x400mm

Providing polished ceramic wall tiles of approved quality, size, shape and not less than 8mm on walls and skirtings over 15mm thick cement plaster......wit h colour of the tiles land as approved and directed by the department. A) Range (11) of size 200x300mm and above.

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3...........approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) white cement complete at all level as specified and directed. iii) a) Deluxe-vc

Applying priming coat over new wood and wood based surface over 100mm in girth/width after and including preparing the surface by throughly cleaning oil grease. Dirt and other foreign matter sand papering and knottine. (b) With ready mixed paint wood primer (white)

Painting two coats (excluding priming coat) on new wood and wood based surface manufacture with enamel paint of approved brand and manufacture (Asian paint/Berger paint/ICI shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i) Surface over 100mm in width or girth (a) High gloss (Asian paint/Berger paint/ ICI paint/J & N paint Nerolac)

Providing two coats of Birla White Wall Care Putty..............as directed by the department (Total thickness of two coats is maximum 1.50mm) i) 1.50mm thick

(g) Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade............including preparing surface even and sand papered somooth.

Extra over item no. (f) (g) & (h) above for distempering every subsequent coat of distemper f approved brand and manufacture.

Finishing old/new wall with water proofing weather coat smooth anti-fungal premium acrylic smooth exterior finish........... including scaffolding complete as directed at all levels.

Santitary and water supply Providing fitting and fixing vitreous china pedestal type water closet.................. including painting of fittings fixing.... A) Parryware a) White (i) Cat-C0271

Providing fitting and fixing victreous china flat back type lipped front urinal..........floors wherever required. (A) Parryware Make (a) White (i) New

Providing vitreous china wash basin .........1.13.2 without pestial basin B) Hindware a) White ii) Standard 630 x 400

Supplying fitting and fixing PVC flushing cistern with all internal fittings with brackets including fitting and fixing standard size CP flush pipe, union clamps, etc. complete as directed and specified (Pipes will be measured separately). I) Parryware a) White (ii) Deluxe Single Flush.

Supplying fitting and fixing PVC pipes of 6kg/cm2..............as directed and specified. Ii) 110mm dia.

Supplying fitting and fixing PVC pipes of 6kg/cm2..............as directed and specified. iii) 90mm dia.

Supplying fitting and fixing PVC pipes of 6kg/cm2..............as directed and specified. iv) 75mm dia.

Supplying fitting and fixing 87.5 degree PVC band...........as directed and specified ii) 110mm

Supplying fitting and fixing approved uPVC pipes of different sizes..........etc.complete at all levels including below g.i. As directed and specified. A. Exposed or in trenches C) 32mm

Supplying fitting and fixing approved uPVC pipes of different sizes..........etc.complete at all levels including below g.i. As directed and specified. A. Exposed or in trenches D) 25mm

Supplying fitting and fixing approved uPVC pipes of different sizes..........etc.complete at all levels including below g.i. As directed and specified. A. Exposed or in trenches f) 15mm

Supplying fitting and fixing chrome plated CP stop-cock of approved brand.......... i) Jaquare a)15mm dia

Supplying fitting fixing CP pillar cock of 15mm I) Sona Make a) Light body

Suppyling fitting and fixing gun metal country pit value B) 40mm dia.

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging......... as required for inlet and outlet pipes. i. 1500 Lt capacity a. Sintex make

Labour erecting and placing PCVC tank over the stagging up to a height of 8.00m complete as directed.

(B) Providing Grill and Gate for Security Purpose: Providing fitting and fixing M.S grill of required pattern for window/opening........bars with rounded handed bolts and nuts or screws. 1. Plain Grill (c) Fixed to Brick work/PCC/RCC.

Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron .............loking arrangements stoppers, handles including applying a priming coat of red lead paint.

(C) Directional board near N.H.31 (C) 2 Nos. Earth work in excavation for foundation trenches of walls, retaining walls. footing of colums,steps and septic tank etc. including refiling (return filling) the quantity as necessary after completing of work. breaking clods in return filling dressing. watering and ramming etc and removal of surplus earth with all lead & lift as directed and specified in following classification of soils including bailing out water where necessary as directed and spedified. (A) Up to a depth of 2.0 m below the existing Ground level. (a) In Ordinary Soil.

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code for R.C.C. work/R.B. walling including straightening,cleaning, cutting and bending to proper sharpes and length with 20G annealed black wire and placing in position with proper blocks,supprots,chairs,spacers etc complete. (Upto 1st floor level) b) ISI approved super ductile TMT Bar. (iii) TATA/SAIL

Providing brick soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparation the subgrade as directed including all labour and materials and if necessary dewatering complete. (a) Flat brick soiling.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing, steps,walls,brick works etc. as directed and specified including dewatering if necessary and curing complete (Shuttering works where necessary shall be measured and paid separately.) (a) In prop 1 cement :3 sand : 6 coarse agg. by volume.

Providing form work of 12mm thick plywood board so as to give a rough finish including centering,shuttering, strutting and propping etc.height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in situ reinforced concrete and plain concrete work in. 3.2.1.1 Column, pillars, post & strut of square/rectangular/polygonal in plan or any shape like Tee/L etc. having plan vertical face. iv) Using 12mm thick ply

Providing form work of 12mm thick plywood board so as to give a rough finish including centering,shuttering, strutting and propping etc.height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for in situ reinforced concrete and plain concrete work in. 3.2.1.2. Side and soffts of beams, beam haunchings, cantilever girder, bressumers, lintel & horizontal ties. (a) For depth not exceeding 1.0M

Providing and laying plain/reinforced cement concrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding coast of from work and reinforcement for reinforced cement concrete work. (from work and reinforcement will be measured and paid separately) (i) Using mixture machine (a) In Sub-Structure up to plinth level Foundation, footing, colums with base, tie & plinth beam, pile cap, base slab,retaining walls, walls of the septic tank inspection pit and the like and other works not less than 100mm thick up to plinth level. (N) With out admixture, plasticiser (b) M-20 grade concrete ro prop.1:1.5:3

Providing and laying plain/reinforced cement concrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding coast of from work and reinforcement for reinforced cement concrete work. (from work and reinforcement will be measured and paid separately) (i) Using mixture machine (b) In Super Structure from plinth level up to 1st floor level. (ii) Colums, pillars, posts, struts, suspended floor, roof landing , shelf & support balcony, lintel,sill band,beam,girder.........and finishing of nosing. (N) With out admixture, plasticiser (b) M-20 grade concrete ro prop.1:1.5:3

10mm thick cement plaster in single coat on single of half brick wall for interior plastering upto 1st floor level including arrises or rounded angles not exceeding 80 mm girth and finished even and smooth including curing complete as directed. A) On rough side (b) In cement mortar 1:3

Providing one coat of J.K. Wall Putty While Cement based putty for concrete/mortar walls and ceiling both intrernal and external after removing all...........of two coats is maximum 1.50mm.

Finishing old/new wall with water proofing weather coat smooth anti-fungal premium acrylic smooth exterior finis..........including scaffolding complete as directed at all levels.

Supplying and writing direction board both side of the RCC plate as directed by the department complete.