31/2021-22(EDCR) For the work of increasing capacity of overloaded transformers under jurisdiction of EDD-BILASPUR, Rampur

Amount

Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.

8.5 Mtr long PCC Pole.

Cartage of Healty Transformer from store to site, dismantling of HT & LT connection & replace of follwoing capacity T/F from substation double poles/plinth by Healthy transformer(including connection) and old transformer cartage from site to T/F's repair workshop/Store centre, Rampur safely including loading and unloading with associated work at both ends within 70 kms.

Increasing load capacity of overloaded 25 KVA by 63 KVA trasnformer

Increasing load capacity of overloaded 25 KVA by 100 KVA trasnformer

Increasing load capacity of overloaded 100 KVA by Separate 100 KVA trasnformer

Increasing load capacity of overloaded 100 KVA by 250 KVA trasnformer

Double pole structure Excavation of foundation pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole)Erection of support(pole) complete with providing and fixing of all clamps made of MS flat of size 75x8 mm. and other accessories(Substation angle 75*75*6*2028) . The work includes fabrication work and fixing of cross bracing sets 3.5 Mtr from MS Angle 65x65x6 mm/50x50x6 mm. The work includes cutting holes and providing MS Bolts of 16x40 mm size in the middle of the cross bracing with 1 No. sparing washer of proper size.

8.5 Mtr long PCC Pole

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a)Double pole structure

8.5 Mtr long PCC Pole

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs

Make Plinth for 250 KVA Transformer with size 2*2*1.5M and CC 1:3:6 (cement, course sand and stone grit) with muffing etc. as per RESPO Norms and as per direction of Supervising Engineer.

Fencing of Plinth by providing fiber fence with 6ft Hight surrounding T/F as per RESPO Norms and as per direction of Supervising Engineer.

Providing and fixing Stone Pad

M/s Charley Enterprises

M/s Kaniska Traders

MOHAMMAD NAZIM KHAN CONTRACTOR