Provision of UPS System and Active Harmonic Filters for the GLF System in CCR hall at NSCBI Airport

Amount

SH: A - ELECTRICAL WORKS Supply, Installation, Testing & Commissioning (SITC) of 300KVA (Nominal Capacity) UPS unit, 3-phase-4 wire, suitable for operating condition 415±15%, 3ph, 50Hz ± 10% IGBT rectifier and PWM Controlled IGBT inverter based online double conversion type DSP controlled UPS, True Sinewave, suitable for operation for constant current regulators with 100% unbalanced load at output at full load condition along with standard features like 100% rated static bypass, maintenance bypass facilities, battery monitoring features integrated with UPS controller, IP20 capable of running at 100% load and having provision of upgrading the UPS to run in load sharing mode with suitable isolator confirming to the specification attached along with K-13 copper wound transformer (with Galvonic Isolation) suitable for the system, but without batteries, as per specifications attached and as directed by Engineer-In-Charge (EIC).

Design, Supply, Installation, Testing & Commissioning of Battery Monitoring System for UPS Battery (Battery Monitoring System - BMS) related to item no. 2 and as per attached specification (Complete with including all hardware, installation accessories, software, cable for communication with remote and colored Inktank type printer with cartridges) having the facility of data reading, recording, analyzing & exporting with suitable format.

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal / coke and salt as required.

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal / coke and salt as required.

Providing and fixing 50 mm x 6 mm copper strip in 80 mm dia. G.I pipe from earth electrode including connection zawith brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 50 mm x 6 mm GI strip in 80 mm dia G.I pipe from earth electrode including connection with GI nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 50 mm x 6 mm GI strip on surface or in recess for connections etc. as required.

Supplying and installing following size of Hot dip Galvanized perforated type cable trays of following sections along with connectors, necessary wall support made of RS Angle including bolts & nuts etc. and painting as required. a) 450 mm wide X 50 mm X 2mm thick

Supplying and installing following size of Hot dip Galvanized perforated type cable trays of following sections along with connectors, necessary wall support made of RS Angle including bolts & nuts etc. and painting as required. b) 150 mm wide X 50 mm X 2mm thick

Supply Fabrication & installation of 8 mm thick chequered plate duty painted for covering Cable trench, with lifting hook and straighter/supports along with provision of MS angle iron structure in cable trench etc. inside the substation yard.

Providing & fixing of Carbon dioxide (CO2) type fire extinguishers conforming to IS 2878-1976 and cylinder fully charged of 4.5 Kg capacity hanged on wall with bracket component as required.

Providing & fixing of First Aid box as approved by St. John Ambulance Brigade / Indian red Cross conforming to IS 2217 -1963

Supply & fixing of fire retardant/ extinguishing Electrical insulated synthetic mat of 2.0 mm thick +/- 10% confirming to BIS: DOC NO. ET-02 (5440) meeting requirements of IS: 15652 :2006 (with up to date amendment), suitable for all voltages not exceeding 3.3 KV and having minimum width of 1000 mm +/- 20mm and including supply of required quantity of adhesive/ compound and fixing the same at size as per site requirements.

Supply of following size power cables of 1.1 KV grade, XLPE Insulated PVC Sheathed aluminum conductor cable, armored, and PVC sheathed conforming to IS 7098 Part-I with up-to-date amendments. (a) 4 C X95 Sq. mm

Supply of following size power cables of 1.1 KV grade, XLPE Insulated PVC Sheathed aluminum conductor cable, armored, and PVC sheathed conforming to IS 7098 Part-I with up-to-date amendments. (b) 4 C X 120 Sq. mm

Supply of following size power cables of 1.1 KV grade, XLPE Insulated PVC Sheathed aluminum conductor cable, armored, and PVC sheathed conforming to IS 7098 Part-I with up-to-date amendments. (c ) 3½ X 240 sq. mm

Supply of following size power cables of 1.1 KV grade, round wire armoured FR PVC Insulated multi-stranded, flexible, copper conductor cable, PVC sheathed conforming to IS 1554 with up to date amendments. (a) 1 C X120 Sq. mm

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required. (a) 4 X 95 sq. mm

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required. (b) 4 X 120 sq. mm

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required. (c ) 3½ X 240 sq. mm

Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. (a) 1 X120 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe as required. (a) Upto 35 sq. mm Aluminium

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe as required. (b) Above 35 sq. mm and upto 95 sq. mm Aluminium

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe as required. (c ) Above 95 sq. mm and upto 185 sq. mm Aluminium

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe as required. (d) Above 185 sq. mm and upto 400 sq. mm Aluminium

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. (a) Upto 35 sq. mm Aluminium

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. (b) Above 35 sq. mm and upto 95 sq. mm Aluminium

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. (c ) Above 95 sq. mm and upto 185 sq. mm Aluminium

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. (d) Above 185 sq. mm and upto 400 sq. mm Aluminium

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. (a) upto 35 sq. mm (clamped with 1mm thick saddle) Aluminium

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. (b) Above 35 sq. mm and upto 95 sq. mm (clamped with 25 X 3 mm MS flat clamp) Aluminium

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. (c ) Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40 X 3 mm MS flat clamp) Aluminium

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. (d) Above 185 sq. mm and upto 400 sq. mm (clamped with 40 X 3 mm MS flat clamp) Aluminium

Laying of one number PVC insulated copper conductor power cable of 1.1 KV grade of following size in the existing masonry open duct as required. (a) 1 C X120 Sq. mm

Dismantling of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL/HDPE pipe as required. (a) Upto 35 sq. mm

Dismantling of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL/HDPE pipe as required. (b) Above 35 sq. mm and upto 95 sq. mm

Dismantling of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL/HDPE pipe as required. (c ) Above 95 sq. mm and upto 185 sq. mm

Dismantling of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL/HDPE pipe as required. (d) Above 185 sq. mm and upto 400 sq. mm

Dismantling of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. (a) Upto 35 sq. mm

Dismantling of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. (b) Above 35 sq. mm and upto 95 sq. mm

Dismantling of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. (c ) Above 95 sq. mm and upto 185 sq. mm

Dismantling of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. (d) Above 185 sq. mm and upto 400 sq. mm

SH: B - CIVIL WORKS Dismantling steel work in built-up sections in angels, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 mtrs. lead.

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 7.5 in super structure above plinth level upto floor V level in all shapes and sizes in: Cement mortar 1:4 (1 cement: 4 coarse sand)

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 mtrs. lead as per direction of Engineer -in-charge. Nominal concrete 1:3:6 or richer mixer (i/c equivalent design mix).

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and lying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 Coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Cement concrete flooring 1:2:4 (1 cement: 2 coarse: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate.

12 mm cement plaster of mix : 1:6 (1 cement : 6 fine sand)

15 mm cement plaster on the rough side of single brick wall of mix ; 1:6 (1 cement : 6 fine sand).

Neat cement punning.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel but hinges with necessary screws.

Providing and fixing aluminium sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300 X 16 mm.

Providing and fixing aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300 X 10 mm.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm.

Providing and fixing aluminium exruded section body tubular type universal hydraulic door closer (having brand logo with IS :3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper.

Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Providing and fixing tiled false celling of specified materials of size 595 X 595 mm in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel section (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24 X 38 mm made from 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200 X 600 mm and secondary cross "T" of length 600 mm and size 24 X25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 X 600 mm panel to form grids of 600 X 600 mm and wall angle of size 24 X 24 X 0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 X 37 X 25 X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 X 30 X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white tiles of size 595 X 595 mm. and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Buy Back Item Taking away after dismantling steel work in built up sections in angles, tees, flats and channels including all guest plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead.

Bidder Name

Amount in Words

Labotek

ISSAR INDUSTRIES

K KUMAR RAJA PROJECTS PVT LIMITED

Labotek

ISSAR INDUSTRIES