Annual Repairs and Maintenance to ESI Hospital, Alappuzha.

Amount

Engaging skilled Plumber cum supervisor (Male only) with necessary tools and miscellaneous minor fittings such as Telxon tape, washers, jumper valves etc for attending the day to day complaints , minor repair works, fixing /replacing the damaged fittings such as taps/ wash basins, EWC/IWC, flushing cisterns, Replacing damaged PVC/GI pipe lines, PVC rain water pipes and fittings, pumping water to the Hospital buildings and staff quarters including cleaning service tanks ,minor repairing and maintenance of Pumps and periodic chlorination of open wells etc all works connected with internal/ external water supply lines, water supply fittings/ fixtures, sanitary installations, under ground sumps/ OHT, Plumbing works connected with STP etc at ESI Hospital and staff quarters at Beach ward, Alappuzha and ESI Dispensaries and staff quarters at factory ward, Alappuzha and at Pathirappally, Alappuzha and Branch office and staff quarters at Factory ward, Alappuzha during 2021-22 as directed by the Engineer in charge.

Plumber in one shift of 8 hours duty From 9.00 AM to 05.00 PM on all days excluding Sundays or any one off day per week.

Plumber in one shift of 8 hours duty from 9.00 AM to 5.00 PM on call basis on Sundays or any one off day per week in lieu of working on Sundays in exigency of work.

Engaging Helper for plumber(Male Mazdoor) for attending complaints on sewer/drainage lines, removing blockage in Drainage/ sewer lines, Gully traps, Manholes and Septic tanks etc. in the campuses of ESI Hospital and staff quarters at Beach ward, Alappuzha and ESI Dispensaries and staff quarters at factory ward, Alappuzha and at Pathirappally, Alappuzha and Branch office and staff quarters at Factory ward, Alappuzha during 2021-22 and other works entrusted to Beldars when works assigned as sewer man are free and as directed by the Engineer in charge.

Helper for plumber(Male Mazdoor) in one shift of 8 hours duty From 9.00 AM to 05.00 PM on all days excluding Sundays or any one off day per week.

Helper for plumber(Male Mazdoor) in one shift from 9.00 AM to 5.00 PM on daily basis as and when required by the Engineer in charge.

Engaging Helper (Male Mazdoor) for assisting plumber in attending the day to day complaints of all sorts of Internal water supply/External water supply/sanitary installations, Assisting carpenter in repair works, cleaning open area in campus, Assisting sewer man in clearing blockages/ clearing silting storm water drains including removing and replacing RCC covers, removing growth of baniyan tree on buildings, cleaning Terrace water tanks, Over head tanks, underground sumps and cutting/Pruning branches of trees up to 20 cm in diameter etc at ESI Hospital and staff quarters at Beach ward, Alappuzha and ESI Dispensaries and staff quarters at factory ward, Alappuzha and at Pathirappally, Alappuzha and Branch office and staff quarters at Factory ward, Alappuzha during 2021-22 (Note: Beldar is not to be specifically attached with any skilled worker and suppose to attend all woks assigned to him and as directed by the Engineer in charge)

Helper in one shift of 8 hours duty From 9.00 AM to 05.00 PM on all days including Sundays.

Helper in one shift of 8 hours duty From 9.00 AM to 05.00 PM on all days excluding Sundays or any one off day per week.

Engaging Skilled Carpenter/Mason/ Aluminium Fabricator/ Welder/Other similar trades men with necessary tools and miscellaneous fittings such as screws ,nails, rawl plugs, wooden gutties etc and sleeves etc in attending complaints regarding all steel/wooden/Aluminium doors, windows /partitions in theESI Hospital and staff quarters at Beach ward, Alappuzha and ESI Dispensaries and staff quarters at factory ward, Alappuzha and at Pathirappally, Alappuzha and Branch office and staff quarters at Factory ward, Alappuzha during 2021-22 as directed by the Engineer in charge.

In one shift from 9 AM to 5 PM on daily basis as and when required by the Engineer in charge.

Cleaning of septic tank of size up to 5 x2x 2 m including removing and refixing the cover slab , fully de sludging and emptying the tank either manually or by truck mounted sucking units including disposing the sludge either to the Municipal dumping yard or locally by making earth pits and refilling with earth etc complete as directed by the Engineer inn charge. (A photograph of cleaned septic tank bottom shall be provided along with the bill for payment).

Clearing jungle Mechanically with JCB or similar machinery including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level including dressing the surface/filling the undulation etc and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (Cutting shall be done on prior approval and necessary certificate after finishing the cutting work each time shall be obtained from the concerned ESI Office.)

Clearing Bushes grass brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (Cutting shall be done on prior approval and necessary certificate after finishing the cutting work each time shall be obtained from the concerned ESI Office.)

Cutting branches of trees of the girth (measured 1 m from stem), including cutting of trunks and branches, and stacking of serviceable material and disposal of unserviceable material.

Beyond 30cm up to 60 cm girth. (above 6 mtr height)

Beyond 60 cm girth up to 120 cm.

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge including finishing the surface with trowel with neat cement slurry and making pattern of 300 x 300 mm square 3 mm deep. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).

Plaster thickness varying between 12 mm.

In-filling / sealing of joint between RCC lintel cum sunshade and wall (on external side) in all floors by pushing in Grout RW/equivalent in paste form and coving 20 mm x 20 mm after applying a coat of Zycosil/ equivalent & zycoprime /equivalent solution before cement plastering of top, bottom and sides of RCC sunshade.

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge.

25mm average thickness.

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.

Bars upto 12 mm diameter metre.

Bars above 12 mm diameter metre.

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.

SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer.

Supplying only following miscellaneous fittings/materials for plumber/ Carpenter/mason of approved quality.

Coarse sand

Cement in 50 kg Bags

Soft brush

White cement

Brass cup board locks 6 levers 65 mm

Oxidized Mild steel butt hinges 125*65*2.12 mm

Oxidized Mild steel butt hinges 75*47*1.70 mm

Anodised Aluminium sliding door bolt 300x16mm (ISI)

Anodised Aluminium Tower Bolts (ISI) 200*10 mm

Anodised Aluminium Tower Bolts (ISI) 150*10 mm

Anodised Aluminium Tower Bolts (ISI) 100*10 mm

Anodised Aluminium handles 125 mm (ISI)

Anodised Aluminium handles 100 mm (ISI)

Anodised Aluminium handles 75 mm (ISI)

Acrylic distemper 1st quality, having VOC content less than 50 gm/kg

Acrylic emulsion, having VOC content less than 50 grams/ litre

Synthetic enamel paint in all shades except black or chocolate shade

Fine sand

Galvanised steel plain sheet used at site excluding wastage

Anjali/Jakwood in scantlings (excluding wastage to be measured)

Brass bib cock 15 mm (400 gm)

Brass stop cock 15 mm (400 gm)

CI gratings 150*150 mm

SCI gully/Nahni grating 100 mm

Polyethylene water storage tank with cover and suitable locking arrangement Sintex /Aqua ISI marked

PVC connection with brass union 45cm long

White plastic seat with lid / brass hinges for EWC

HP or LP brass ball valve with polythene float 25mm dia

Brass full way wheel valve with CI wheel 25 mm

Brass full way wheel valve with CI wheel 40 mm

Brass full way wheel valve with CI wheel 50 mm

Brass full way wheel valve with CI wheel 80 mm

Gun Metal Non return Valve 40 mm

Gun Metal Non return Valve 50 mm

Gun Metal Non return Valve 80 mm

CP brass waste coupling 32 mm

CP brass waste coupling 40 mm

Vitreous china orrisa type W.C. pan of size 580 mm

White vitreous EWC Pan of approved make

Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10 kg/sqm)

Float glass panes 5 mm thick (12.50 kg/sqm) cut to size including wastage

Ply wood 6mm thick 5 layer, BWR

Aluminium hanging floor door stopper with twin rubber & stopper

GI sheet .80mm thick

White vitreous china Wash Basin 540x400 mm

Dash fastener/Chemical fastener for aluminium work

Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm

kitchen sink Stainless steel with drain board 510x 1040mm with 225mm bowl depth

Factory made 35 mm thick shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of 12 mm thick both sides prelaminated type-I, medium density flat pressed three layer, graded particle board (FPT-I) as per IS:3087 bonded with BWP type synthetic resin adhesive, as per IS:848.

Factory made 30 mm thick shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of sheet glass using 10 kg/ sqm glass pane

UPVC pipe 4 kg/sqcm 75 mm dia

UPVC pipe 4 kg/sqcm 110 mm dia

UPVC bend 87.50-degree 110 mm

UPVC bend 87.50-degree 75 mm

CP brass Bib cock 15 mm (400 gm)

CP brass long body Bib cock 15 mm (690 gm)

Hydraulic door closer Tubular type Aluminium section body

CP Brass Angle valve 15 mm (400 gm)

CP Brass stop cock concealed

Powder Coated Aluminium sections (used at site excluding wastage)

PVC flushing cistern 10 litres capacity

CP Brass with elbow operation lever bib cock 15 mm

Double action hydraulic door floor spring with stainless steel cover plate

PTMT Bib cock 15 mm

PTMT stop cock 15 mm

PTMT pillar cock 15 mm

Prelaminated Particle Board both side decorative lamination Exterior grade 12 mm (excluding wastage to be measured)

Vitrified Tile 600x600 mm

Ceramic Floor tile 300x300mm

A.P.P. modified polymeric felt (two layers) 1.5 mm thick

Bitumen primer for APP membrane

Primer paint

Glazed ceramic Tile

Agregate 20mm/40 mm Grade

CPVC pipe 15 mm dia

CPVC pipe 20 mm dia

CPVC pipe 25 mm dia

CPVC pipe 40 mm dia

CPVC pipe 50 mm dia

CPVC pipe 75mm dia

Silicone Sealant

50 mm x 42 mm x 2 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish,syntex or equivalent

25 mm thick factory made PVC flush door shutter i/c carriage syntex or equivalent

100 mm mortice n lock 6 levers for Aluminium doors

Aluminium Grill as per IS 1868 (excluding wastage to be measured)

GI hook and eye 75mm

PVC tank cover

CP brass Pillar tap for wash basins weighing not less than 650 gm

CP brass health faucet 15mm

PVC handle with lever for flushing cistern

Siphoning set with rubber washer

Flexible PVC waste 32mm

Flexible PVC waste 40mm

CPVC elbow 20 mm

CPVC elbow 25mm

CPVC elbow 40mm

CPVC bend 20 mm

CPVC bend 25mm

CPVC bend 40mm

CPVC threaded adapter 20mm

CPVC threaded adapter 25mm

CPVC threaded adapter 40mm

CPVC tee 15 mm

CPVC tee 20 mm

CPVC tee 25mm

CPVC tee 32 mm

CPVC Reducer 25x20mm

CPVC Reducer 32x25mm

CP hex nipple 15mm

CPVC clip

110mm PVC Pipe @ 4 kg/sqcm

75 mm PVC Pipe @ 4 kg/sqcm

50 mm PVC Pipe @ 6 kg/sqcm

110mm PVC coupler

110mm PVC clip

PVC end cap 15 mm to 40 mm

110 mm dia door Tee PVC

110mm dia door elbow PVC

110mm bend PVC

PVC bend 15 mm

PVC bend 20 mm

PVC bend 25 mm

PVC bend 40 mm

PVC bend 50 mm

PVC elbow 15 mm

PVC elbow 20 mm

PVC elbow 25 mm

50mm door elbow PVC

CPVC coupler 25mm

CPVC coupler 32mm

Tarpoline Plastic, thickness not less than 100 micron size not less than 20'x20'

Second class moulded beading 50 x12 mm (Finished beading used excluding wastage)

Second class moulded beading 50 x20 mm (Finished beading used excluding wastage)

Rack Bolt for Holding Wash basin,sink etc

Pre fabricated Air hole net with fibre beading frame 60 cmx 15 cm

Modular common burnt clay bricks of class designation 7.5

Cement Concrete Block size of 300 x 200 x 150 mm

Cement Concrete Block size of 400 x 200 x 100 mm

Dash fastener / Chemical fastener

Brass handles 125 mm with plate 175x32 mm

EPDM Gasket for uPVC window/door m

12 inch friction stay Himax Hinges

Credit for dismantled materials (payment to be made to ESIC in lieu of dismantled materials available while replacing with new fittings.

CP Brass bib cock 15 mm

CP bras stop cock 15 mm

CP brass angle valve 15 mm

Gun metal valve- 20 mm nominal bore

Gun metal valve- 25 mm nominal bore

Gun metal valve- 32 mm nominal bore.

Gun metal valve- 40 mm nominal bore

Gun metal valve- 50 mm nominal bore

80 mm nominal bore

15 mm nominal outer dia GI pipe

20 mm nominal outer dia GI pipe

25 mm nominal outer dia GI pipe

32 mm nominal outer dia GI pipe

40 mm nominal outer dia GI pipe

PVC Connections 15 x 300 mm

CP Brass pillar taps 15 mm

Fire Wood

T Ashokan

PRADEEP.V

SJK Engineers and Facility Managers Pvt Ltd

GLAZE SPOT FACILITY MANAGEMENT SERVICES LLP