JJM Providing FHTC to Rural Household in Kuzhupilly Panchayath Part 2 Supply erection testing and Commissioning of pumpsets 90 Hp and 125 Hp

Amount

Supply, erection, testing and commissioning of 90 HP CF pump set maintenance during a period of two years with the following specification

Pump: - Supply, erection, testing and commissioning of KWA prequalified reputed make Centrifugal pump sets with bronze/SS impeller, SS shaft and CI pump casing with suitable type base plate with coupling, coupling guard foundation bolt & nuts etc. Complete suitable for coupling the pump and motor above the base plate etc. complete including providing suitable concrete foundation including cost of cements and metal etc. complete The duty condition as follows a) Discharge- 82 LPS, b) Total head- 55 M c) Speed- 1500 rpm

Starter - Supply erection, testing and commissioning of suitable rating Fully automatic starter with air break contract starter suitable for the above motor with over voltage and under voltage protection, single phase preventer, over load relay with motor protection relay with main contractor and bypass contactor as per IE rules and code of practice etc. Complete

Cabling work - Supply, laying, testing and commissioning of suitable size XLPE cables for the above pump set from panel board to starter and from starter to motor considering energy conservation

Earthing - Supply of all materials and providing suitable earthing by using suitable size pipe/plate earthing GI/copper strip buried in ground and giving double earthing to motor, starter, panel board etc. as per IE standards

Capacitor - Supply, erection, testing and commissioning heavy duty APP capacitor for the motor to get a power factor above 0.95. The capacitor shall confirm to IS 2834.

Valves - Supply of suitable size best quality heavy duty ISI marked CI double flanged sluice valve and Non return valve with suitable pressure rating. Fitting of valves shall include proper RCC support especially for Non return valves. In case of positive suction pump sets sluice valve should be in suction as well as delivery sides for easy repair works.

Suction and delivery pipe connections - Supply and fitting of suitable size best quality GI/MS pipe (Thickness not less than 8mm) for a total length of 10m. Suitable for the above pump set and suitable size foot valve and connecting the suction pipe and valve with suitable flanges, nut and bolts, IR sheet etc. complete and connecting the delivery side of the pump with the valves and suitable specials to connect with the pumping main. If the dia. of suction pipe is above 80 mm CI pipes & specials shall be provided

Supply, erection, testing and commissioning of 125 HP CF pump set maintenance during a period of two years with the following specification

Pump: - Supply, erection, testing and commissioning of KWA prequalified reputed make Centrifugal pump sets with bronze/SS impeller, SS shaft and CI pump casing with suitable type base plate with coupling, coupling guard foundation bolt & nuts etc. Complete suitable for coupling the pump and motor above the base plate etc. complete including providing suitable concrete foundation including cost of cements and metal etc. complete . The duty condition as follows a)Discharge- 130 LPS, b) Total head- 50 M c) Speed- 1500 rpm

Starter - Supply erection, testing and commissioning of suitable rating FCMA starter suitable for the above motor with over voltage and under voltage protection, single phase preventer, over load relay with motor protection relay with main contactor and bypass contactor as per IE rules and code of practice etc. Complete

Cabling work-Supply, laying, testing and commissioning of suitable size XLPE cables for the above pump set from panel board to starter and from starter to motor considering energy conservation

Earthing - Supply of all materials and providing suitable earthing by using suitable size pipe/plate earthing GI/copper strip buried in ground and giving double earthing to motor, starter, panel board etc. as per IE standards

Capacitor- Supply, erection, testing and commissioning heavy duty APP capacitor for the motor to get a power factor above 0.95. The capacitor shall confirm to IS 2834.

Valves - Supply of suitable size best quality heavy duty ISI marked CI double flanged sluice valve and Non return valve with suitable pressure rating. Fitting of valves shall include proper RCC support especially for Non return valves. In case of positive suction pump sets sluice valve should be in suction as well as delivery sides for easy repair works

Suction and delivery pipe connections - Supply and fitting of suitable size best quality GI/MS pipe (Thickness not less than 8 mm) for a total length of 10m. Suitable for the above pump set and suitable size foot valve and connecting the suction pipe and valve with suitable flanges, nut and bolts, IR sheet etc. complete and connecting the delivery side of the pump with the valves and suitable specials to connect with the pumping main. If the dia. of suction pipe is above 80 mm CI pipes & specials shall be provided

Hydro Electrical Systems

S.PRABHURAM

SURAS AGENCIES

STANDARD ELECTRICAL WORKS

AISWARYA AGENCIES

Bidder Name

Hydro Electrical Systems

SURAS AGENCIES

AISWARYA AGENCIES

National Electrical Works

STANDARD ELECTRICAL WORKS

S.PRABHURAM