Providing and Fixing work of Furniture in Nagarpalika office building, At. Jasdan, Dist: Rajkot Under SJMMSVY (Year-2025-26)

NAME OF WORK :- PROVIDING & FIXING WORK OF FURNITURE

LOCATION:- NAGARPALIKA OFFICE BUILDING, AT- JASDAN

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing and arranging Three seated sofa made with Size 3000 mm ×

800 mm × 800mm using 19mm thk. Plywood (century ply/green ply/kit ply)

structure frame with S.S. legs required necessary support fixed with

necessary fixtures and fastening (Hardware). It shall be covered with

Density PU foam with required Thickness as per design in seat & back and

handle portion this should be again covered with 14 mm thick PU foam

with Madarpat cover on it & upholstered fabric or leather of suggested &

approved by architect finished with seat, back & all visible side as per

drawing. Complete instruction of engineer in charge. 8.00 38380.00 No

High Back Revolving Chair With Arm, Upright locking, Pedestal Base

Stainless Steel, Armrest Material Aluminium, Seat material Metal, Backrest

is made of One piece injection moulded frame, Density of PU foam used in

seat KG per Cu Meter (± 3) 55, Twin wheel castor material Nylon, Number

of twin wheel castor 5 Nos., Backrest & Seat upholstered with Leatherette,

GSM/Thickness of fabric ±5%(Gram/Square meter) 250 gram, Overall

width 610 mm, Backrest Height 200 mm, Seat Height ±10 mm 460 mm,

Seat Width ±10 mm 440 mm, Seat Depth ±10 mm 410 mm

VISITOR CHAIR (OC-ORG19), MATERIAL: Type of material (other then

wood) used in Polythene cane Chair- NOT APPLICABLE, Material of

Fabric Back Cover- leatherite, Thickness of Plywood used in Backrest IN

MM (±1 mm)- N.A, Frame Material - MS,Density of Polyurethane Foam

Used in Seat ±2 (Kg/Cub M) -32 Kg/Cub.M, Material of Fabric of Seat

Cover black- leatherite, Density of Polyurethane Foam Used in Backrest

±2(Kg/Cub M)- 32 Kg/Cub.M 60.00 5544.90 No

Supplying of 3 Seater Seating Chair of mild steel with arm and backrest

WITHOUT CUSHION, Material of Arms armrest are made up of powder

coated high pressure aluminium dye cast, Material of Legs cold rolled

steel, Overall Length in mm (±10 mm) 1840, Thickness of material of Main

Frame in mm 2.2, Thickness of material of Arms in mm 2.2, Overall Depth

in mm ( ±5 mm) 400, Overall Height in mm (±5 mm) 450, Seat Height from

Floor in mm (±5 mm) 460 mm 5.00 6137.77 No

Supplying of Virgin Polypropylene materials Arm Chair size of Width of

seating 25", Depth of seating area 23", overall Height 35", Chair Load

bearing capacity of 100 Kg., As per Attached Design including loading,

unloading, transportation etc. complete 365.00 858.50 No

Providing and arranging center table (Tipoy) as per required design, size of

900x600x4500, main structure of frame of 19mm thick plywood and

supports ply of 8 to 12mm thick (centruy ply/green ply/kit ply) in/out side

1mm thick decorative laminate, movible pvc wheel with top sandwitch

pattern suggested & approved by architect finished with Complete

instruction of engineer in charge. 4.00 9595.00 No

Total Amounts Rs...…

Total Amounts Rs...…

I/We am/are willing to carry out the work @________% Above / Below__________Percentage (should be writen in

figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Item No. & Description Quantity Rate Per Amount

Estimated Amount Estimated Amount

Put to Tender Rs. 10,82,700=00 Put to Tender Rs. 10,82,700=00

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor

Cons. Engineer Municipal Engineer

"DESIGN POINT" Jasdan Nagarpalika

Chief Officer President

Jasdan Nagarpalika Jasdan Nagarpalika