SPECIAL REPAIRS TO BLDG NO P 199 INCLUDING ROOF TREATMENT AND PROVN OF SPORTS STORE ROOM AND BATHROOM AT MIL STN GANDHINAGAR

Amount

M&L for surface excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Loose soil complete all as specified and directed.

M&L for excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation of pole, laying of cables etc in soft/loose soil and getting out complete all as specified and directed.

M&L for returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation complete all as specified and directed.

M&L for spreading and levelling under floor layers not exceeding 25 cm thick and well ramming including watering as required complete all as specified and directed.

M&L for providing dry river sand as in sand cushioning to UG cable including punning gently all as directed. Note: Depth after punning shall be measured and paid.

M&L for removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

M&L for removing excavated material exc 250m and depositing where directed at a level n exc 500 m above the starting point in soil.

M&L for removing rubbish to a distance exc. 1.5 Km but not exc. 5.0 Km out side MD land complete all as specified and directed.

M&L for Hardcore of broken stone of gauge n exc 63mm deposited, spreaded & levelled in layers n exc 15cm thick including watering and ramming etc complete all as specified and directed.

M&L for treating the back fill in at wall floor junction @ 7.5 ltrs of emulsion per sqm of vertical surface area complete all as specified and directed.

M&L for treating the top surface of filled earth under floor @ 5 ltrs of emulsion per sqm of surface area complete all as specified and directed.

M&L for PCC 1:4:8 type D-2(40mm graded aggregate) in foundation , sub base, filling and mass concrete complete all as specified and directed.

M&L for cement concrete (1:2:4), type B0, using 12.5 graded stone aggregate in roof kerbs coving roof kerbs coving coved fillets of 75mm radius at junction bof roof slab and parapet wall , vertical surfaces and like etc complete all as specified and directed,

M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 159, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for 30 mm thick, precast cement concrete 1:2:4, Type B-0 using 12.5mm graded stone aggregate as in louvers and jallies, (measured solid) including all mouldings and precast cement concrete 1:2:4 type B-0, pillars/supports to jallies, set in cement mortar 1:4 complete including taking down old Jallies all as specified and directed.

M&L for RCC M-25 grade concrete in foundation including raft,footing foundations beem ,plinth beams base for coloumn etc. complete all as specified and directed.

M&L for RCC M-25 using 20mm graded aggregate in chajja landings, balconies, canopies, deck slabs and in the shelves raling and the like etc. complete all as specified and directed.

M&L for RCC M-25 (using 20 mm graded granite stone aggregate) for slabs suspended on walls, beams and columns, in floors, roofs, landings and in shelves and the like complete all as specified and directed.

M&L for RCC M-25 in lintel beams/lintels, roof beams over 1.50 mtr span complete all as specified and directed.

M&L RCC M-25 (Design mix ) in columns, pillars, piers, posts and struts complete all as specified and directed.

Supply only integral water proofing compound ISI marked

Supply only, liquid water proofing compound mixed as per manufacturer instructon mixed in cement concreter or cement mortar complete all as specified and directed.

Cutting chases, for water tubing or concealed , etc, and making good to facings where required and plastering in cement mortar (1:4) cutting not exceeding 10cm girth in brick walls.

M&L for fly ash Brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for fly ash Brick work with old size, sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Cutting opening through brick walls for door, windows and other openings or enlarging existing openings, coverting window into door openings etc or cutting out defective brick work for under pinning including providing fixing and removing shoring cleaning and stacking bricks removing surplus serviceable bricks hard core etc to store and rubbish not exc 50m complete all as specified and directed

M&L for Forming jambs, etc to openings (to foregoiing item) including cutting toothing and properly bonding into old work also facing jointing and pointing to match exisiting work as cement mortar 1:6 complete all as specified and directed

Supply and laying sub class old 'B' burnt bricks, size of brick 230x115x75mm, laid as cable protection cover complete all as specified and directed.

Removing existing water proofing /black top treatment from parapet wall, removing material to a distance exc. 1.5 Km but not exc. 5.0 KM out side Md land complete all as specified and directed.

M&L for rendering cement plaster in two coat 5 mm thick in CM 1:4 using WPC over 10 thick in cement mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid separately)

M&L for water proofing treatment to non accessible roof slab by applying one coat of cold bituminous primer @ 0.30 litre/sqm and confirming to IS-3384, laying APP based polystr modified membrane reinforced non wooven polyster of 3.50 kg/sqm (minimum) 3mm thick with plain polythene finished and sealing all the overlap 75mm in length side and 100mm in width side of membrane by torching including applying one coat of bituminous aluminium paint over membrane all as specified and directed.

M&L for form work to sides of concrete foundations footing bases of coloumn raft and raft beams sides and soffits of plinth beams and similar works vertical or to batter complete all as specified and directed.

Rough finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exce 200 mm thick complete all as specified and directed.

M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M&L for form work to sides of lintel beams and roof beams hunching griders braessummers lintel vantilivers etc. complete all as specified and directed.

M&L for form work to sides of pillars, post, struts, columns etc with rough finished surfaces of concrete of square, rectangular or polygonal complete all as specified and directed.

Rough finished flat Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down aluminium door shutter, resecuring shutter at joint by cleats/screws fixing of horizontal ms screwed bars for strengthening, replacement of pivots, floor door spring, hydraulic door closer, mortice lock etc. complete all as specified and directedNote : Replacement item shall be paid seperately

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.

S&F, Aluminium anodised barrel tower bolt of extruded section and fixed of 150 mm size complete all as specified and directed

S&F, butt hinges 100 mm long extruded aluminium alloy with galvanised mild steel hinges pin, anodised pin, anodised & fixed type B-21 complete all as specified and directed

S&F, 150 mm size aluminium handles cast type anodised complete all as specified and directed

S&F, Mortice lock, brass, four lever, vertical type, size 100mm complete all as specified and directed.

Supply only brass four levers mortice lock, vertical type size 100 mm complete all as specified and directed

S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply only double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed

S&F Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending, hooking etc and binding with MS wire 0.9mm dia(annealed) complete all as specified and directed.

S&F, mild steel TMT bar 8mm dia ,cut to length, bent to shape reqd including cranking, bending , hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F, mild steel TMT bar 5mm dia and over upto and including 10mm dia in stirrups,cut to length, bent to shape reqd including cranking, bending , hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply only Mild steel screwed bar 5 to 6 mm dia length of bar equal to width of door shutter (machine made) with hexagonal and screwed at both end to top fitted with washers and hexagonal or square nut complete all as specified and directed

Supply only Mild steel door pivot suitable for aluminium door frame & shutter complete all as specified and directed

S&F, Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.

M&L for 15 to 16 mm thick black granite stone slab (table rubbed and polished) in cooking platform, steps, jambs, pillars, window cills 10 mm thick screed bed in CM (1:4) as set with neat cement slurry including pointing in white cement (1:2) using marble dust with admixture and pigment to match with the shade of granite.

Rounding to edges of stone slabs one edge, such as steps, cooking plateform, and other similar situations complete all as specified and directed.

M&L for 50mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed. (Note : Joint filling shall be measured and paid separately)

M&L for 100 mm thick PCC 1:4:8 type D-2( 40 mm graded stone aggregate ) as in sub base of flooring complete all as specified and as directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in sub-floors, sub-bases, floors and pavings, etc. complete all as directed.

M&L for 40mm thick cement concrete (1:2:4) for DPC, type B01 using 20 mm graded stone aggregate as in DPC with plain fair faces, including chamfers, weathering, throating etc with water proofing compound as per manufacture. (note: wpc should be measured and paid seperately)

M&L for 40 mm thick (average consolidated thickness) PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate mixed with liquid water proofing compound as per manufacturer instruction, laid in slope 1:30 on roof a sin padding, finished even and fair complete all as specified and directed. (Note : Water proofing compound shall be measured and paid separately).

S&F, Glazed ceramic tiles coloured in vertical surface 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:3 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300 x 450mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:3) , complete all as specified and directed.

S&F, non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tiles exceed.11 sqm but not exc.0 .18sqm , in floors etc etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 15 mm thich screed bed of CM (1: 6) complete all as specified and directed.

M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.11 sq.m but not exceeding 0.18 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick cement mortar (1:4) complete all as specified and directed.

M&L for light shade vitrified tiles, 10 mm thick, (square/rectangular), area of each tile not exceeding 0.36 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick cement mortar (1:4) complete all as specified and directed.

M&L for light shade vitrified tiles, 10 mm thick (square/rectangular), area of each tile n exceeding 0.36 sq.m in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering cement mortar (1:3) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick on on fair faces of concrete surfaces as on PCC padding in CM 1:3 and finish the surface even and smooth without using extra cement for laying APP membrane at non-accessible roof (mumty) all as directed

M&L for rendering cement plaster 5mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering cement plaster 15mm thick in cement mortar (1:4) on fare faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering cement plaster 5mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick for Screed bed or bedding layer of mortar for laying green concrete even and smooth without using extra cement including WPC (Note WPC paid seperately) complete all as specified and directed.

M&L for prepration of new/old surfaces of wall and applying two coats of plastic emulsion paint with including 03 mm thick wall care putty roller application complete all as specified and directed..

M&L for prepration of new/old surfaces of wall and applying two coats of plastic emulsion paint with including 03 mm thick wall care putty roller application complete all as specified and directed..

Taking down cement plaster on brick or stone wall etc. from top of roof slab, cleaning, sweeping and washing the surface including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for cutting uneven surfaces of concrete & cutting reinforcement from drops of fins & facias (thickness not exceeding 50mm) using necessary scaffolding and making good the disturbed portion with 5mm thick rendering in CM 1:3 finished even and smooth without using extra cement etc. complete all as specifeid and directed.

M&L for preparing new plastered or un-plastered ceiling surfaces and applying two coats of oil bound distemper including putty complete all as specified and directed.

M&L for preparing old plastered or un-plastered surfaces of wall and applying one coats of cement base paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paints of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface complete all as specified and directed

M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered or un-plastered ceiling surfaces and applying one coats of white wash complete all as specified and directed.

S&F, 4mm thick, black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed.

S&F, 5mm thick, black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed.

S&F in repair, 5mm thick, black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 25mm bore of pipe complete all as specified and directed.

Supply and laying of 16 mm outer dia CPVC pipe SDR 11 fitting on walls /ceiling or laying in floors complete all as specified and directed.

S&F, 16 mm outer dia CPVC elbow with brass thread at one end for fixing of taps etc and other end plain complete all as specified and directed.

S&F, 16 mm outer dia CPVC Tee with brass thread at one end for fixing of taps etc and other end plain complete all as specified and directed.

S&F, 16 mm outer dia CPVC adopter with female brass thread at one end for fixing of taps etc and other end plain complete all as specified and directed.

S&F, 16 mm outer dia CPVC tank adopter complete all as specified and directed.

S&F, 16 mm outer dia CPVC unionr complete all as specified and directed.

Supply and laying of 20 mm outer dia CPVC pipe SDR 11 fitting on walls /ceiling or laying in floors complete all as specified and directed.

Supply and laying of 20 mm outer dia CPVC pipe SDR 11 fitting in trenches complete all as specified and directed.

S&F, 20 mm outer dia CPVC tank adopter complete all as specified and directed.

S&F, 20 mm outer dia CPVC union complete all as specified and directed.

Disconnecting, setting aside (or lowering if required) and Cleaning & removing all scale and dirt etc from HDPE water tanks of 500 litres capacity (Tanks placed on top of roof) and from mouths of circulating pipes etc including washing the tank with bleaching powder and hoisting, reconnecting and re-fixing in position including writing the date of cleaning of tank with synthetic enamel (black/white) paint of size not less than 10cm of each letter complete, all as specified and directed.

Supply, hoisting and fixing in position, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top) including dismantling of old PVC/AC water storage tank of 500 liter capacity complete all as specified and directed.

Supply, hoisting and fixing in position, 500 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top) including complete all as specified and directed.

S&F, angle cock, cast copper alloy, fency type, chromium plaed screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed.

S&F, brass chromium plated bib cock fancy type long body 15 mm dia with capstan head screwed up or down complete all as specified and directed

S&F, chromium plated brass wall mixer with crutch & telephonic shower arrangement including S/S flexible tube 1.5 m long and hand shower complete all as specified and directed.

S&F, towel rack of size 600X200 mm including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F, CP brass towel ring of 250 mm dia fixed with wall with screws and wooden/plastic cleats complete all as specified and directed.

S&F, chromium plated glass shelf of size 22"(550mm long) complete all as specified and directed.

S&F, 8 mm thick glass corner of radius 300mm with decorative SS ring and fixed to wall with SS D type brackets complete all as specified and directed.

S&F, vitreous china wash basin ovel type fixed on a granite/marble platform incl cutting in slab as required , size 560mm x 470mm complete all as specified and directed.

S&F, in repair, central hole basin mixer with popup waste system with 450mm long braided Hoses, cast copper alloy, chromium plated, screwed down, high pressure, screwed for iron pipes of 15mm bore complete all as specified and directed.

S&F, wall mounted vitreous china wash down water closet pan pedestal pattern (2 piece with connecting chair & fixing bolts) including seat cover and composite flushing cistern with all accessories complete all as specified and directed.

S&F, in repair two way bib taps with hand faucet with 1.2 mtr brass flexibile tube and wall hook mounted type chromium plate for EWC complete all as specified and directed.

S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed.

S&F, 25 mm dia, 1mm thick stainless steel fancy type decorative curtain rod (As per Sample) fix with wooden gutties giving smooth finish to surface using white (putty or cement) complete all as specified and directed.

S&F, in repair, 25 mm dia, 1mm thick stainless steel fancy type decorative curtain rod (As per Sample) fix with wooden gutties giving smooth finish to surface using white (putty or cement) complete all as specified and directed.

S&F, stainless steel decorative ball type side bracket including roller stopper for 25 mm dia curtain rod as per sample complete all as specified and directed.

S&F, chromium plated, Soap dish holder complete all as specified and directed.

S&F, in repair, chromium plated, Soap dish holder complete all as specified and directed.

S&F, 18mm thick, PVC sheet one side prelaminated of approved texture ("Celuca Ply of Rajshree make or equivalent in "Sintex" as approved by GE) as in Kitchen cabinet (with shelves and partitions) including necessary fittings & fixtures as per manufacturer's instructions complete all as specified and directed.

S&F, Gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixed for bore dia of pipe in 20 mm complete all as specified and directed

S&F, in repair, Gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixed for bore dia of pipe in 20 mm complete all as specified and directed

S&F, Gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixed for bore dia of pipe in 25 mm complete all as specified and directed

S&F, in repair, Gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixed for bore dia of pipe in 25 mm complete all as specified and directed

Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F, 32 mm waste fittings of brass cromium plated for glazed sinks, basins etc with long screwed shanks and fly nuts complete all as specified and directed

S&F, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms) complete, all as specified and directed.

S&F, in repair, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms) complete, all as specified and directed.

S&F, PVC connection 15 mm size and 450 mm length complete all as specified and directed.

S&F, 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in treches or in floors complete all as specified & directed

S&F, 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in treches or in floors complete all as specified & directed

S&F, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F, 110 mm PVC (SWR) junction single (Single T) equal or unequal with acess door complete all as specified and directed

S&F, 110 mm PVC (SWR) vent cowls complete all as specified and directed

S&F, in repair, PVC (SWR) floor trap, with chromium plated grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mmsetting and jointing with solvent cement

M&L for cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested for 150mm bore of pipe complete all as specified and directed.

M&L for salt glazed stone ware drain pipes, 150mm internal diameter, grade 'A' laid in trenches and jointed complete all as specified and directed.

Cutting into existing manholes for 100mm internal dia of pipe connection new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed

S&F, 32mm bore high density polythylene (HDPE) pipes of pressure rting 6kgf/sqm complete all as specified and directed.

M&L Forming construction joint 30 mm deep x 10 mm wide filled with sealing compound Grade'A' complete all as specified

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings exc. 15cm thickness above ground level complete all as specified and directed.

Demoltion of RCC floor, beams,staircase,landing, chajjas and similar suspended work complete all as specified and directed.

Demolition and breaking up old unserviceable drain pipes up to 100/110 mm bore ( salt glzed ware, AC, PVC or reinforced concrete) set in cement mortar or fixed to wall with stack clamp complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan,socket or power) complete,including fixture and fitting such as as switches, ceiling roses, pendants, regulators, sockets,etc excluing light fittings etc,removing materials to store for keeping in safe custudy or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surface of walls, ceiling, floor etc to match with the existing surface complete all as specified and directed.

M&L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with provision sunken concealed terminal boxes complete all as specified and directed for the following :-

(a) One light/fan /Exhaust point controlled by one switch

(b) One multi purpose socket 5 Amps, Independent board.

(c) One multi purpose socket 5 Amps, on the same board.

(d) One bell buzzer point controlled by one push buttons independent.

M&L for wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC concealed conduit of 20mm bore fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. for one 3 pin, 15 Amps socket outlet point on independent board complete all as specified and directed.

M&L for wiring with and including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick laminated hylam sheet cover for mounting switches, sockets and fan regulators etc. complete all as specified and directed for the following :-

(a) One light/fan point controlled by one switch

(b) One multi purpose socket 5 Amps, Independent board.

(c) One multi purpose socket 5 Amps, on the same board.

S&F, in repairs, LED light fitting, batten type, housed in extruded from powder coated aluminium, 20 watt complete set flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.

S&F, in repir, LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F, in repair, LED light fitting 1 x 10 W bulk head luminaries including LED driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F, LED street light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection.

S*F, switch piano, flush button single pole, one way 5 Amps complete all as specified and directed.

S&F, switch piano flush button single pole, one way 15 Amps complete all as specified and directed.

S&F, Modular Switch, 1 way, 6A, 1 module including suitable outer cover complete all as specified and directed.

S&F, Modular Switch, 1 way, 16A, 1 module including suitable outer cover complete all as specified and directed.

S&F, in repair, Modular Bell push 6A, 1 Module including suitable outer cover complete all as specified and directed.

M&L, bell electric, dingdong type AC 230 Volt, single pole complete all as specified and directed.

S&F, Socket, 6A, 2/3 pin combined 2 module type including suitable outer cover complete all as specified and directed.

S&F, Socket, 6A/16A, 2/3 pin combined 2 module type including suitable outer cover complete all as specified and directed.

M&L for ceiling fan step regultor, 120W - 2 module including suitable outer cover complete all as specified and directed.

S&F, in repair, modular cover plate with frame for 3 modules complete all as specified and directed.

S&F, in repair, modular cover plate with frame for 4 modules complete all as specified and directed.

S&F, in repair, modular cover plate with frame for 6 modules complete all as specified and directed.

S&F, in repair, modular cover plate with frame for 8 modules complete all as specified and directed.

S&F, in repair, modular cover plate with frame for 12 modules complete all as specified and directed.

S&F, socket outlet multipurpose, 3 Pin, 15 Amps and 5 Amps flush type cmplete all as specified and directed.

S&F, socket outlet 2 in 1, 3 Pin, 5 Amps flush type cmplete all as specified and directed.

S&F, sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 volts 20 Amps complete all as specified and directed.

S&F, in repair, Ceiling rose, PVC/poly carbonate,isolated body three terminals,complete all as specified and directed.

S&F, Ceiling rose, PVC/poly carbonate,isolated body three terminals,complete all as specified and directed.

S&F, Distribution Board SPN 4 way, 240 volts, factory made powder coated, double door with neutral and earth link, suitable for fixing MCB,s complete including connecting all as specified and directed.

S&F, in repair Distribution Board SPN 8 way, 240 volts, factory made powder coated, double door with neutral and earth link, suitable for fixing MCB,s complete including connecting all as specified and directed.

S & F in repair MCB’s single pole, 6 to 32 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

S & F in repair MCB’s SPN 32 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Supplying & laying, XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium conductor, 1100 volt grade of size 6 Sqmm, 2 Core, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

S&F, in repair, exhaust fan, PVC body heavy duty, AC single, 230/240V of size 300mm sweep with, blades and louvers complete all as specified and directed.

S&F, exhaust fan, PVC body heavy duty, AC single, 230/240V of size 300mm sweep with, blades and louvers complete all as specified and directed.

S&F, ceiling fans complete with blades, down rods, electronic regulator and cessories, 230 V, 1200mm sweep, Min ari dilivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Taking down existing geyser and depositing in MES store yard for keeping in safe custudy and refixing the same after completion of work complete all as per specified and directed.

Taking down existing ceiling fan and depositing in MES store yard for keeping in safe custudy complete all as per specified and directed.

Taking down existing exhaust fan and depositing in MES store yard for keeping in safe custudy complete all as per specified and directed.

M&L in replacement sub-main wiring with 2 single core 4 Sqmm PVC insulated, unsheathed, 1100Volts grade, copper multi stranded conductor drawn in and including PVC concealed conduit and conduit assessories including drawing a run of PVC insulated, unsheathed, 650/1100Volts grade, copper conductor multi stranded 4 Sqmm size as continuous earth wire drawn through and connected to main switch/ DB and testing on completion. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length. (ii) Rates quoted shall be inclusive of cutting wall for concealing conduit and making good the same in cement mortar 1:3. Make - Havells/ Plaza/Polycab

M&L for earthing and testing complete with galvanized iron earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 M below normal ground level with top edge plate at a depth not less than 1.5M below normal ground level connected to and including earth lead GI wire 4.0 mm dia, by means of bolts and nuts,check nuts and washers etc.,made of GI and connected to panel/distribution board and earthing test point and earth dolly all as shown in elect plate No.3 of SSR Part-1 including necessary earth work,excavation PCC chamber cover with handle (PCC 1:2:4) incl 20mm dia GI pipe of medium grade for watering and 15mm dia GI pipe of light grade for protection of earthing lead, wire mesh, funnel, charcoal dust,common salt,copper lugs etc all as specified and directed .

S&F, decorative wall mounting, brushed nickel finish fixture with opal glass diffuser suitable with 9W LED lamp B22 Base complete all as specified and directed.

S&F, in repair, decorative, surface mounted fixture, decorative LED Luminaire 12W LED complete all as specified and directed.

S&F, in repairs, surface mounted, LED bedside light of 3 W in black colour (WW) , 240V, 50 Hz, and connecting up complete with PVC insulated and PVC Sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.

Supply and laying GI pipe 40mm dia light grade below road / fixed to along the poles / walls with necessary clamping, including encasing the cable into the pipe all as specified and directed.

ALBA AC AND REF SERVICES

ARTI CONSTRUCTION

Ramdev and Sons

GIRNAR CONSTRUCTION

Haritwal traders

SNEH TRADERS

Singh Engineer And Contractor