Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹21.4 L
EMD Value
₹42,775
Closing Date
24 Jul 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SUPPLY,INSTALLATION, INTEGRATION, TESTING AND COMMISSIONING OF FIRE ALARM SYSTEM
8612
HAL/KGD/TS/E/2024-25/03
Works
Accessories Complex - SEPF-KASARAGOD
₹0
₹42,775
24 Jul 2024
3 Jul 2024
3 Jul 2024
24 Jul 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
GST NO.:
PAN No.:
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Average annual financial turn over during the last 3 years, ending 31st March of 2022 financial year [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.
TURN OVER IN Rupees
Enclosed
ESI & PF Nos with proof (If any)
Related Document to be Uploaded to e-Procurement Portal
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value Rs in lakhs
Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
40% (Three Works)
Type of Work: [Incase of private works the same shall be supported with TDS certificate]
Type of Work: [Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
Type of Work: [Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
Site visit certificate as per Annexure
DECLARATION I
Pls Accept The Delarication
DECLARATION II
Pls Accept the Delaration II
Schedule-A
Description
Intelligent addressable networkable fire alarm control panel Specification as per annexure II(1) Make: Honeywell/Notifier/Siemens/Bosch/JCI/Tyco/Godrej/Edwards
Intelligent addressable networkable active repeater panel. Specification as per annexure II(2) Make: Honeywell/Notifier/Siemens/Bosch/JCI/Tyco/Godrej/Edwards
Analog addressable photo electric smoke detector Specification as per annexure II(3) Make: Honeywell/Notifier/Siemens/Bosch/JCI/Tyco/Godrej/Edwards
Analog addressable rate of rise cum fixed temperature detector Specification as per annexure II(4) Make: Honeywell/Notifier/Siemens/Bosch/JCI/Tyco/Godrej/Edwards
Addressable control relay module Specification as per annexure II(5) Make: Honeywell/Notifier/Siemens/Bosch/JCI/Tyco/Godrej/Edwards
Addressable Manual call point/pull stations Specification as per annexure II(6) Make: Honeywell/Notifier/Siemens/Bosch/JCI/Tyco/Godrej/Edwards
Addressable Hooter cum strobe Specification as per annexure II(7) Make: Honeywell/Notifier/Siemens/Bosch/JCI/Tyco/Godrej/Edwards
Short Circuit Isolator Specification as per annexure II(8) Make: Honeywell/Notifier/Siemens/Bosch/JCI/Tyco/Godrej/Edwards
Response indicator Make: Honeywell/Notifier/Siemens/Bosch/JCI/Tyco/Godrej/Edwards
LED based directional 300(W)x180(H) mm (approx) signage boards Should conform to IS standard. Minimum 2 Hrs self-maintained Ni-Mh/Ni-Cd battery backup, Aluminium housing body and necessary mounting accessories to make the system fully functional. Make: Altras Electronics/Autolite/Prolite
2 core x 1.5 sq.mm twisted pair shielded multi strand armoured FRLS copper cable with all cable mounting accessories. Make: Polycab/ Dataflex / Orbit/Finolex/CCI
6 core x 1.5 sq.mm twisted pair shielded multi strand armoured FRLS copper cable with all cable mounting accessories. Make: Polycab/ Dataflex / Orbit/Finolex/CCI
Route markers Plate type route marker with appropriate nomenclature shall be made out of 100 mm dia x 5 mm G.I./aluminium plate welded / bolted on 35 mm x 35 mm x 6 mm angel iron, 60 cm long. Such plate markers shall be mounted parallel to and at about 0.5 m away from the edge of the trench at 75 mts interval or as per site conditions as per the instruction of EIC. Should be yellow in colour.
HDPE duct Double walled corrugated HDPE duct ISI marked of minimum inner diameter 51 mm nominal along with accessories like sockets, bends, couplersetc conforming to IS 14930,Part II complete with fitting,cutting, joining etcfor building to building connectivity. Make: Dugar/Prince/Ashirvad/Supreme/Finolex/Duke
PVC casing capping/channels/conduits ISI marked of 50mm size for cable routing as per site conditions with all accessories for routing and mounting like junctions, bends, saddles, screws, nails etc
Civil work Specification as per annexure II(9) Involves laying of the cable by road cutting, digging of the ground, clamping, drilling thro walls.
Specification
2 loop fire alarm system, expandable to minimum 3 more loop card (5 slot)
Should be modular in design and easily configurable.
Should cater for minimum of 300 devices per loop with equal number of detectors and modules in loop.
It shall include a full featured operator interface control and annunciation panel having liquid crystal/LED display (Min 640 characters), individual color coded system showing the status through LEDs, and an alphanumeric keypad for the field programming and control of the fire alarm system. If the panel programming requires a dongle/key then the same shall be supplied along with the panel.
Storage of minimum 750 events in nonvolatile memory.
Necessary interface card to connect repeater panels
Built in two way communication system.
Shall support programmable relays for controlling fans/AC equipment and monitoring of fire sprinklers etc,
Shall have minimum independent hazard release circuit built in the panel.
Panel shall be operational with 230+10%V, 50Hz AC supply and shall have a built in battery charger to charge maintenance free batteries for providing backup in case of power failure.
The panel including the enclosure shall be UL listed and FM approved.
All required accessories along with hardware and software should be provided for making the system fully operational.
Specification
Shall have a minimum 640-character LCD/LED annunciator with backlit LCD with complete system function key for programming and control like system reset, alarm acknowledge etc.
Network interface card to connect a repeater panel
The panel including the enclosure shall be UL listed and FM approved.
It shall also include the required cable to be laid in HDPE conduit for connecting the main panel with repeater panel. and all hardware & software to make the system fully operational.
Specification
The detector shall be with visible LEDs for 360 deg viewing.
LED shall blink every time the detector is addressed/communicated, and illuminate steady red on alarm.
The device shall be UL listed and FM approved.
Suitable for mounting on true /false ceiling. Necessary mounting accessories shall be supplied for making the device fully operational.
Specification
The detector shall be with visible LEDs for 360 deg viewing.
LED shall blink every time the detector is addressed/communicated, and illuminate steady red on alarm.
The device shall be UL listed and FM approved.
Suitable for mounting on true /false ceiling. Necessary mounting accessories shall be supplied for making the device fully operational.
Specification
For tripping the field devices, with LED indication, automatic mapping device, electronic addressing and working at 24V DC.
The detector shall be with visible bi-color LEDs for 360 deg viewing.
LED shall blink every time the detector is addressed/communicated, and illuminate steady red on alarm.
The device shall be UL listed and FM approved.
Necessary mounting accessories shall be supplied for making the device fully operational.
Specification
Addressable Manual Pull Stations or Manual Call Point (MCP) of Single action type with an integrally mounted addressable module that monitors and reports contact status. The system shall be resettable manually/ automatically on clearance of the fault condition.
Specification
Hooter cum strobe unit as per NFPA shall deliver output up to 90 db at 1 m from source (adjustable at site or from the panel) and candela setting from 15 to 130 cd from its installed location and 75cd flashing at 1 Hz for visual indication.
No external 3rd party power supply requirement.
The device shall be UL listed and FM approved.
Necessary mounting accessories shall be supplied for making the device fully operational.
Specification
Analogue addressable fault isolator module capable of monitoring shorted loop circuit.
Automatically restore communications when shorted conditions are corrected.
Module shall be with mounting box,
LED for indication of normal and alarm condition.
Necessary mounting accessories shall be supplied for making the device fully operational.
The device shall be UL listed and FM approved
Design, supply, installation, integration, testing and commissioning of intelligent addressable fire alarm system at HAL Kasaragod and handing over to HAL. The work is to be carried out by vendor as per site's requirements. The detectors are to be installed at various locations in different building on true ceiling/false ceiling as per the instruction of EIC. The BOM, specifications, scope of work and terms and conditions should to be read/interpreted in correlation.
Vendor should arrange necessary accessories like mounting rack/brackets, power points sockets, hooks, nuts & bolts etc. The complete work shall be carried out as per the best engineering practices.
Delivery of entire material to HAL, Kasaragod including packing, handling, transporting etc.
Wherever the ground is dug, wall is drilled/cut for cable laying, fixing of components/equipments etc, it shall be restored to original condition. All debris etc. shall be disposed off time to time to the nearest defined place as directed by EIC, and shall be cleared from site on completion of the installation. Adequate precautions should be taken to prevent dust / debris from falling on computers/telephones/electronic equipments etc. Broken false ceiling should be repaired after completion of the work.
Providing all-inclusive service including all spares, etc. during defect liability period.
Arrange all engineering equipment, labour and permits required to satisfactorily complete the work required by this specification.
Removing and re-fixing of the light fixtures / false ceiling tiles in order to access the area above the false ceiling for laying of cable and fixing of detectors etc. No additional payment shall be made on this account.
The intelligent addressable fire alarm system contractor, upon completion of all the activities, shall offer the system to the customer for acceptance. For this, the vendor shall provide the customer with the following documentation as applicable. i. Copy of detailed report. It should include manufacturer’s name(s), model numbers, ratings, power requirements, equipment layout, device arrangement, complete point to point wiring diagrams, annunciator layouts and main control layout, configurations and terminations, component and equipment list etc. ii. System design drawing(s)/System schematic diagram(s). iii. Complete system operating and maintenance manuals including product description sheets/technical data sheets. iv. Original licensed copies of all the software for installed components as applicable. v. Warranty certificate from OEM for all major components and system warranty. vi. Provide a clear and concise description of operation which gives, in detail, the information required to properly operate the equipment and system. vii. Two copies of the above documents in book form well bound should be submitted. viii. Furnish coloured laminated layout drawings, fire escape route map indicating direction etc in min A2 size and shall be installed in each building. (The sample of the same need to be presented for approval before execution)
The vendor shall provide HAL staff with onsite training on administration, testing, simulating faults and alarms and if possible involving them during the installation and basic troubleshooting/fault identification/quick fixes in emergency, to operate and for routine maintenance of the intelligent addressable fire alarm system.
At the end of each break down repair, the vendor representative should prepare a service report and submit the same to the EIC.
All the tools and testing instruments required during installation and commissioning and for checking, testing and attending to routine maintenance and breakdowns during the defect liability period are in the vendor scope.
Earthing arrangements for all the equipment shall be the responsibility of the vendor and to be carried out as per standard procedures.
All the termination of cables shall be done using brass saddles, copper thimbles and proper nomenclature tags for loop identification. The cable path shall be provided with necessary markers for identification.
Modifications if mandatorily required for installation due to site conditions shall be accommodated by the vendor.
The vendor should extend the OEM warranty for all the active components like addressable intelligent panel, repeater etc which are having warranty beyond the normal system warranty
Provide and install machine-printed labels on panels/equipments/components as applicable.
The SITC shall inclue all accessories required for completion of the work in all respects as per annexure I,II,II and IV
Time is the essence of the contract. The vendor shall complete the work within 12 weeks of the receipt of the work order/PO. Failing which liquidated damages at a rate of 1.0% of the contact amount per week of delay beyond the stipulated period with an upper ceiling of 10% of the contract amount, shall be levied.
The work shall be carried out between 8.00 AM and 5.00 PM. In case of exigency, prior permission shall be sought from EIC to work beyond the hours mention herein, Sundays and holidays.
The entire equipment/system/installation/supplies shall be warranted to be free from defective materials and workmanship and any defects that may appear within 24 months (two years) from the date of issue of completion/acceptance certificate, which in the opinion of HAL have arisen from bad workmanship or materials, shall upon intimation to HAL, be made good by the vendor at his own cost within the time specified. In case of failure to do so within the time specified from such notice, HAL may get such rectification works carried out through any other firm and expenditure incurred shall be recovered from any money due to the vendor at the cost and risk of the vendor. During the said period of 24 months (DLP), the vendor shall once in 3 months or earlier if required carryout inspection of the entire system, full servicing, cleaning and checking of devices and ensure its functioning and attend to such other service that may be required of him including attending to any number of breakdown calls free of charge by deputing competent personnel.
Critical area detectors viz server rooms/UPS rooms/CCTV server room and any other critical areas etc should be invariably included and checked during the regular visits Suitable log register indicating faults, rectification done with date & time of breakdown should be maintained and got signed from the security/Fire officer.
HAL will not provide any assistance in the form of men/material during the execution of the guarantee period. The vendor will have to make their own arrangements for deputing a helper to skilled personnel including all necessary spares for rectification of the defects reported/observed. This being an emergency system, any fault in the system shall be rectified as per the rectification time given by EIC at the time of reporting of the fault.
This document is meant for the specific use by the company / persons interested to participate in the current tendering process. This document in its entirety is subject to copyright laws. HAL expects the bidders or any person acting on behalf of the bidders to strictly adhere to the instructions given in the document and maintain confidentiality of information. The bidders will be held responsible for any misuse of the information contained in the document and liable to be prosecuted by HAL in the event of such a circumstance is brought to the notice of HAL. By downloading the document, the interested party is subject to confidentiality clauses.
Storage space may be allowed at site as per the availability. The contractor will have to make his own arrangement for security and locking arrangement of the storage space. The contractor may be required to vacate the storage space as per customer’s exigency without any extra cost.
If the vendor desires any extension of time for completion of work on grounds of having unavoidable hindrances in execution or any other ground, they shall apply in writing immediately after the occurrence of the hindrances. Such application shall contain complete details of hindrances, which hindered the vendor in the execution of the work. Such applications shall be directed to the issuer of the WO/PO. Decision of the department in this regard shall be final/binding.
Vendor shall maintain at site responsible, efficient, qualified and well experienced in charge during the period of execution of work.
Any representative of the vendor shall not be allowed inside the premises, who may be guilty of misconduct.
The vendor will be required to indemnify and keep indemnified HAL, against all losses and claims for injury and damage to any person or any property whatsoever which may arise out of or in consequence of the work and against all claims, demands proceedings damages, cost charges and expenses whatsoever. HAL will forward the service provider any such claim demand or complaint made by any other person against the company. In such event, the contractor shall solely be liable for the disposal of the said complaint.
Further, the vendor shall be the principal employer of all manpower working in our premises on their behalf. The vendor would be held responsible in case of any statuary violation of any statute regulating manpower.
If any work or material used at site is found to be unsound, imperfect or inferior from what is specified in the contract, the vendor shall be advised to rectify or re-execute the work or remove the material as the case may be, within a reasonable time depending upon the nature of work. If the vendor fails to do so, the work shall be redone or rectified or the material replaced through any other agency at the risk and cost of the vendor.
During the execution of works, every care shall be taken to ensure least interference with the day to day activities of HAL and its workforce.
The contractor shall carry out and complete the said work in every respect in accordance with this contract and with the directions of and to the satisfaction of the EIC. The EIC may in his absolute discretion and from time to time issue further directions/written instructions, details and explanations in regard to a) The variations or modifications of the design, quality or works or the addition or omission or substitutions of any work. b) Any discrepancy in the schedule of quantities, specifications and scope of work. c) The removal from the site of any materials brought thereon by the contractor and the substitution of any other material there for d) The removal and/or re-execution of any works executed by the contractor e) The dismissal from the works of any persons employed there upon. f) The opening up for inspections of any work covered up. g) The amending and making good of any defects.
All the major components namely intelligent addressable panel, detectors, manual call points etc shall be procured from OEM/OEM authorised dealer distributors. Vendor shall provide valid OEM dealer/distributor certificate of the agency from whom the components are procured.
Items for which specifications are not mentioned in tender document should conform to the latest applicable ISI/Industrial standards, IEC publications and shall comply with all currently applicable statutes, regulations and safety codes marked or according to applicable government norms.
The damage caused, if any, to government property through the acts of the firm and/or by its workers shall be made good by the agency and decision of HAL in this regard shall be final/binding.
The rates quoted shall be deemed to be for the finished work at site and shall be deemed to cover for all the minor details / requirement of installation which may not have been explicitly mentioned or given in particular specifications, BOQ etc but are required as per established engineering practices for completion of the job as per the intent and scope of work. The rates shall also be firm and shall not be subject to exchange variations, labour conditions, fluctuations in railways freights or any other conditions whatsoever levied by the central government or any state government or local authority on supply of building materials / labour and for undertaking the work under this contract, if applicable. No claim in respect of sales tax, works contract tax, GST, excise duty, or any other taxes, duties or levies shall be entertained by the employer
Any false and/or inadequate information can result in rejection of the tender.
Incomplete tenders are liable for rejection without any further communication with the bidder and decision of HAL in this respect will be final.
The EIC shall, during the progress of the works, have power to order in writing from time to time the removal from the works within such reasonable time or times as may be specified in the order of any materials which in the opinion of HAL are not in accordance with the specifications, the substitutions of proper materials, and the removal and proper re-execution of any work executed with materials or workmanship not in accordance with the specifications or instructions and the vendor shall forthwith carry out such order at his own cost. In case of default on the part of vendor to carry out such order, HAL shall have the power to employ and pay other persons to carry out the same; and all expenses consequent thereon, or incidental thereto, shall be borne by the vendor, or may be deducted by HAL from any moneys due, or that may become due, to the vendor.
HAL reserves the right to reject a tender under any of the following circumstances:- a) If this RFQ document is not submitted or submitted without seal & signature of the vendor in any of the pages. b) If tender documents are incomplete and /or not accompanied by all stipulated documents. c) If any of the terms and conditions and mandatory declarations are not accepted.
The applicant should not have any objection to HAL inspecting the site where the similar work is being carried out or already executed by the applicant. HAL may also hold enquiries from past /present clients of the applicant.
All the active components proposed should be as far as possible from a single manufacturer for seamless integration, compatibility and better support in future.
The products quoted should not be declared end of life/end of sale at the time of quoting/delivery and OEM should support the products quoted for at least 7 years and a letter to this extent be attached as a proof.
The operation of the complete system shall be ascertained in the temperature range if 10 deg to 45 deg centigrade and humidity 80% or better.
Complete fire alarm system warranty from the date of installation and acceptance for a period of 2 years. The qualified vendor shall agree to take up comprehensive AMC for a period of 5 years, for the entire system after warranty/ defect liability period
Data sheets/leaflets/leteratures giving complete technical details and makes of the components/Equipment offered wherever applicable shall be attached along with the quote.
Compliance to BOM , Specifications, terms and conditions and scope of work shall be provided.
The offer shall remain valid for 180 (one hundred eighty) days from the date of opening of tender. A bid valid for a shorter period may be rejected by HAL as non-responsive.
Before submission of quotation, the bidders shall visit the site and shall carefully examine all the information herein included and shall fully acquaint themselves with all existing conditions, limitation and official regulations etc at HAL work site and shall collect all the information which he may require for preparing and submitting the tender, entering into contract and for the satisfactory execution of the work. No claim what-so-ever shall be entertained on the ground of lack of information of site conditions and / or the conditions prevailing in the site area. You shall depute your representative(s) to our Kasaragod plant to study and understand the requirements. The representative has to display his credentials upon which he shall be permitted to enter the premises. Upon thorough study of our requirement, you should submit your quotation as per given technical specification. All cost of this visit is to your account. Bidder must collect the ‘Certificate of Inspection’ (Annexure) from the authority and submit with technical bid failing which, tender shall not be accepted for financial bid opening. If at any later stage on verification the credentials have been found to be false, the tender shall be disqualified. For the purpose of preliminary study, you are requested to contact SM (Maint) at the following address: Mr D H Venkatesh SM(Maint) HAL, SEPF Kasaragod, KINFRA Park, Maipady PO, Seethangoli, Kasaragod- 561124. Ph : 04994-219505, 09605266131 E-Mail : [email protected].
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NITFIREALARM03JUL.pdf
TENDER_DOCUMENT • 0.14 MB
PQFA1.xls
TENDER_DOCUMENT • 0.05 MB
pricebidFirealarm.xlsm
TENDER_DOCUMENT • 0.03 MB
TBDFIREALARM03JUL.pdf
TENDER_DOCUMENT • 1.76 MB
Annexuresitevist.pdf
TENDER_DOCUMENT • 0.01 MB
coveringletterfoREMDthroughSBIcollect.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureIIB.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureL.pdf
TENDER_DOCUMENT • 0.01 MB
boqspecsowfasrev5.pdf
TENDER_DOCUMENT • 0.06 MB
ProformaA.pdf
TENDER_DOCUMENT • 0.01 MB
DOCUMENTCHECKLIST.pdf
TENDER_DOCUMENT • 0.01 MB
EFTmandateform.pdf
TENDER_DOCUMENT • 0.01 MB
ProformaB.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureI.pdf
TENDER_DOCUMENT • 0.01 MB
PQFA103JUL.pdf
TENDER_DOCUMENT • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .