Supply and Installation of Low Intensity Laser Therapy System for Physiotherapy.

Supply & Installation of Low Intensity Laser Therapy System for Physiotherapy ,as per following Specifications , • -Should be ÇE marked Class II(b) Medical device. • -Laser should be a Class IV Laser based upon Gallium Arsenide (GaAs) or Gallium Aluminum Arsenide (GAAIAS) semiconductor Laser diode. • -Power output of at least 1000mw which should be adjustable as per requirement. • -Either a single or dual wavelength unit with wavelength in Near Infrared range for therapeutic applications. For single wavelength unit, it should be between 800-815 nm and 800-815 and 975-990nm for a dual wavelength unit. • -Provision of Red colored Guide light in visible spectrum (660 nm ornear about). • -Beam divergence not exceeding 13 degrees. Non Collimated. • -Frequency should be adjustable. • Both Continuous Mode (CW) as well as different types of Pulsed Operation Modes should be available for treating various conditions. • -Should have multi spot treatment and manual scanning facility for large area. • -Availability of pre set treatment programs for different conditions as well as facility for manual programming by the therapist and programs in the memory. • -Mains operated (220-240 Volts , 50-60 Hz AC power) with built in voltage regulation & safety features along with rechargeable battery backup. • -Display should be back lit LCD display for all parameters ( including Laser Power) and programs for ease of operation. • -Should comply with directive 93/42/CEE-2007/47/CEE for quality and safety Saving of such assurance . • -Should be supplied complete with Hand Probe(s), all the built in optical arrangements, necessary cables Safety Glasses for the operator and Patient,cover/case, Manual and accessories specified by the Principals.