Maintenance of canal and Repair of Distributaries D-22 to D-23 and its Minors of Dhrangadhra Branch Canal (FY-2025/26)

Jungle clearance of specified

category and bushes for

canal/dam work as directed with

depositing material etc complete.

1 (Excluding tree of grith above 0.5 1494513.15 Sqmt 1.20

5 (A) Upto 2 year old

a) For light dense

Earthwork / Back filling with

side borrow area or from

excavated useful material incl.

watering ramming, Compaction

with pneumatic temping and all

lead and lift etc complete.

Dismantling the C.C., lining

including disposing off the

3 dismentlled materials as directed 23592.45 Sqmt 87.00

etc. complete. (a) 7.5 cm thick.

Providing and Laying in position

Nominal Mix Plain/Reinforced

Cement Concrete Lining of 1:2:4

using cement, sand and crushed

aggregate in Bed, Side Slopes and

Curvature including batching,

mixing, transporting, placing,

vibrating, smooth finishing,

membrane curing (By Curing

Compound Only) as directed with

all lead & lift etc. complete

including dressing the bed and

trimming the canal section and

minor filling with murrum / earth

as per site condition to correct

profile incl. providing bitumen

joints at specified interval.

(Without Using Paver

Machineries& without sleepers)

For 7.50 cm thick canal lining in

Bed / Slope

Providing and Laying in position

Nominal Mix Plain/Reinforced

Cement Concrete Lining of 1:2:4

using cement, sand and crushed

aggregate in Bed, Side Slopes and

Curvature including batching,

mixing, transporting, placing,

vibrating, smooth finishing,

membrane curing (By Curing

Compound Only) as directed with

all lead & lift etc. complete

including dressing the bed and

trimming the canal section and

minor filling with murrum / earth

as per site condition to correct

profile incl. providing bitumen

joints at specified interval.

(Without Using Paver

Machineries& without sleepers)

For 12.50 cm thick canal lining in

Bed / Slope

Providing and laying CC 1:2:4

grade using cement, sand and

crushed metal including Providing

and erecting necessary form

work, centering, vibrating, smooth

finishing, watering and curing as

directed with all leads and lifts

etc. complete.

(b) Super Structure (MSA 20 mm)

Providing, cutting, bending,

binding and fixing in position as

per drawing. TMT BAR , Fe-415

reinforcement for R.C.C. works

and anchor bars incl cost of black

annealed 16 to 18 BWG M.S.. Wire

etc. complete with all lead and lift.

Providing 'fiber glass reinforced

plastic' gauge plate of 4mm

thickness and of following size

with Engraving/pesting bands &

figures of following size with

necessary clips and fastners and

fixing the same at the site of

work etc complete as directed

8 incl. scrubbing the wall surface to 23.00 Rmt 1993.00

remove the deposits gathered at

gauge plate by chiseling where

required. As per drawing Width

of plate 30cm., Band width 1.0cm.

Column width 1.0cm., Height of

figures 7.0cm.

Total= 1 35 80

I/We am/are willing to carry out the work ..................... %above/below percent (Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

In words In words

(B) For Item Rate Tender (ForaboveINR50Cr.):

Item Description of Quantity Unit Rate Amount

No Item(with brief

specification and In In

reference to book of figures Words

specifications)

(A)Total Tendered Amount

(B)Rebate on above tendered amount (if any) % (in figure)

(In words)

(C)Net Tendered Amount (A-B) (in

(in words)

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all P.C.C./R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken

as per vernacular office letter no. 04 of 2024, Dt. 20/01/2024 of The Chief Engineer,

Quality Control (SSNNL) as stated in S.O.R. therefore in P.C.C./R.C.C. items where there is

a change as per nominal mix the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate (i.e. 5448.53 Rs / MT for

OPC) mentioned in all the tender