Buildings

Foundation and basement Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles 450& 380 mm dia dur piles P2,P1

300 mm dia dur piles P3

300 mm dia dur piles P4

Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters for Double under Reamed bulbs 450& 380 mm dia dur piles P2,P1

300 mm dia dur piles P3

300 mm dia dur piles P4

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Note : Classifications of Earth Work Specification are as per 302.2.1(a) of MORD and 301.2.1 of MORT&H--ordinary soil--manual means upto 3m depth for foundations of buildings in restricted places By manual means

Filling with sand in foundations /Pipe line trenches as per drawing and technical Specification Clause 305.3.9 MORD & 304 MORTH

Providing PCC 1:4:8 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete for foundations

Providing PCC 1:3:6 using 40 mm graded SS 5 HBG m/c metal and OPC coarse and fine aggregate confirming to IS 383 including cost and conveyance of all materials and labour charges, machine mixing , vibration,laying in position, curing etc., complete for flooring

Supply and placing of the VRCC M25 Grade Design Mix Concrete correspoinding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weight batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No 402) with minimum cement content as per IS code from standard suppiers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Pile and Bulbs

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Brick masonary in CM (1:6) with traditional size 23x11x7cm

Plastering with CM (1:5) 12mm thick out side

Painting with weather proof Plastic Emulsion grade-1 paint to exterior faces if new walls with 3 coats of approved make and shade and colour including self prime coat including cost of all materials like Plastic Emulsion paint grade-1 ,cost of brushes, etc all operational,incidental and labour charges such as prepaing the walls applying 3 coats of Plastic Emulsion paint , scaffolding charges ,lift charges etc., complete for finished item of work,(3 coats) for all floors ( APSS No 910,911)

Ground floor super structure Supply and placing of the VRCC M25 Grade Design Mix Concrete correspoinding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weight batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No 402) with minimum cement content as per IS code from standard suppiers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. columns GF

Roof Slab 0.15m thick

sunshades 0.60m wide ,0.075m thick at fixed end and 0.05 m at free end

flight and landing slabs of stair case 0.15m thick

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) GF

Brick masonary in CM (1:6) with traditional size 23x11x7cm super structure GF

Plastering with CM (1:5) 12mm thick out side Ground floor super structure

Plastering with CM (1:4) 20mm thick inside GF insde superstructure GF

Plastering with CM (1:3) 12mm thick to ceiling GF

RCM facia 5cm thick in CM (1:3) for drop walls, fins with rabbit wire mesh & nominal reinforcement as directed by Engineer-in-charge with dubara sponge finishing, including cost & conveyance of all materials to site, seigniorage charges, sales & other taxes on all materials, operational & incidental, cost and conveyance of cement, wire mesh, water to work site, centering, scaffolding and form work, lift charges etc., complete for finished items of work but excluding cost of steel & its fabrication charges, for finished item of work. (APSS No.403 & 903)

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, inlcuding cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for Internal walls. Ground floor super structure

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, inlcuding cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for External walls.

Manufacture, supply, delivery and fixing of Window grills, Compound wall grills, Iron Doors, Windows made with MS flats etc including welding, finishing, applying red oxide paint as primary coat etc complete unit 1.00 kgs

Supply and fixing Aluminium Anodised Two/ Three Track Sliding Windows as per approved drawing with aluminium anodised sections of Series C Jindal sections and outer frame top horizontals & both verticals of 8774 of size 62 x 29.5 mm and bottom horizontal - two track frame of 8773 of size 62 x 29.5 mm, Shutter frame top, bottom and verticals of 8304 of size 50 mm x 20 mm and Weather interlocking frame of 8306 of size 50 x 20 with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, nylon rollers assembly and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work BLD-CSTN-11-30 - Item -10 of - Revised data. windows of community hall W1 1.20x1.50m

Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 2408 of size 101.6 x 44.75 x 3.18 mm Shutter frame top, bottom and verticals of 4504 of size 44.45 mm x 47.62 mm x 3.18 and Middle lock rail of 4621 of size 49.91 x 44.45 x 3 mm with tinted-bronze/green glass 5 mm thick(middle to top),MDF Board-exterior both sides laminaed 12mm thick(middle to bottom) fixed including supply and fixing aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work - BLD-CSTN-11-31 & Item 11 of Revised data doors MD 2.00X2.40m

doors D1 1.20x2.10m

Painting with Synthetic Enamel paints - Two Coats - For New Iron Work BLD-CSTN-10-12 -V

Flooring with Non-skid ceramic tiles of size 600 x 600 mm thick between 8-10 mm, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work as per directions of the departmental authorities.

Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials BLD-CSTN-7-20

supply and fixing of RCC jollys of approved design 50mm thick for ventilators

Providing electrification Ground Floor Supply and fixing of 25 mm dia 2.00 mm thick PVC pipe concealed in roof slab with all required accessories including masonary work all labour chages

Supply and fixing of 20 mm dia 1.50 mm thick PVC pipe concealed in walls with all required accessories including masonary work for light , fan and plug point with metal deep box including all labour chages

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A siwtch, ceiling rose and 3 mm thick hyla sheet covering to switch control box including all labour charges etc,., complet for light, bell , fan and exhaust fan points in non - residential building

Wiring with 2 runs 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe with 6A modular siwtch control and 3/2 pin sockets fixing on board including all labour charges

supply and run of 2 of 36/0.3 mm. (1.5. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for mains including all labour charges

supply and run of 1 of 14/0.3 mm. (1.0. sq.mm) Fire retardant PVC insulated Flexible copper cable in existing pipe for earth continuity including all labour charges etc.

supply and run of 4 of 6 sq.mm (7/18) WPSC alluminium cable along with No.10 SWG G.I barer wire through PVC cleats with all accessories including all labour charges etc.,

Providing independent earthing by excavating a trench to a depth of 2.10m in all soils, as per size specied in data ,using 40 mm dia B class GI pipe 2.50m long with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc complete

S&F of TPN distrubution board with IP 42 protection (metal door) suitable for 3 phase ELCB-RCCB-FP isolator as incomer and 10 KA SP MCBS as out going including internal connection and labour charges for surface-flush mounting etc -- 63 A FP isolator-1 no for incomer,6-32A SP MCBS -18 Nos for out going

Supply and fixing of 48" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Astra / Orient Summer Pride

Supply of stepped type Electronic Regulator of makes GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega

Supply of 9" (225mm), Light duty exhaust fan with double ball bearing and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air / MIIT

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty.a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready// Rhino/Panasonicb) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight

Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.BLD-ELEC-9.7.35

Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete BLD-ELEC-9.7.36

Fixing of 40W tube light luminaire on wall / Ceiling with / TW round blocks with all accessories including giving connections and all labour charges etc., complete. BLD-ELEC-7-9-3

Supply and fixing of 16A 3/2 pin flush type wall plug modular socket with shutter and 16A modular switche controll on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of Switches : GM G Home /Anchor Penta Cherry / Gold Madel Olive / Million Zoom / Great White

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tank

Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work

Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 30mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work

Supplying and fixing CP finish brass soap dish of approved make ISI quality including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors

Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.

Supplying and fixing of 25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.

Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 30mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit complete for finished item of work for all floors.

Supplying, of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand

Supply of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/Sudhakar/ Kisan/Supreme or any ISI Brand)

Supply of 110 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)

Supply of 110 mm dia - Coupler - UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg.

S& F 25 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

S& F 20 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

S& F 15 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size

S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 15 mm NB Size

S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent

S& F GI union Ist Quality 25 mm dia