Turn Key Basis work against Deposit scheme under EDD-2, Nanpara

Amount

All Materials Provided by the Contractor as per Resspo Norms PART-A (Supply)

Stone Pad

11 KV Pin Insulator with Pin

33 KV Pin Insulator with Pin

11 KV Disc Insulator with Fitting

33 KV Disc Insulator B&S Type 70 KN

33 KV Disc Fitting B&S Type 70 KN

ACSR Panther Conductor for Bus Bar

Stay Set Complete

Earthing Complete

Barbed Wire

Top Channel 125x65, 32

Top Channel 100x65, 32

X-Base Angle

33 KV Cable Jointing Kit O/D

11 KV Cable Jointing Kit I/D 3x300sqmm XLPE Cable

11 KV Cable Jointing Kit O/D 3x300sqmm XLPE Cable

11 KV Cable Jointing Kit I/D 3x185sqmm XLPE Cable

11 KV Cable Jointing Kit O/D 3x185sqmm XLPE Cable

Control Cable 6x2.5mmsq

Control Cable 4x2.5mmsq

Control Cable 2x2.5mmsq

Alluminium Binding Wire

Earth Wire Clamp

Alluminium Tape

11 KV XLPE Cable 3x300sqmm

11 KV XLPE Cable 3x185sqmm

PG Clamp for Dog/Panther Conductor

CT O/D 33 KV CTR 200/100/1-1A

CT O/D 33 KV CTR 400/200/1-1A

33 KV PT O/D 33 KV/110V

PT Structure

CT Structure

Structure for Bus Isolator

Structure for Line Isolator

Structure for Post Insulator

Structure for LA

Main Bus Bar with Structure

Danger Board

F-Bracket for 33 KV Line

PP & Clamp with Nut Bolts for X-Arm

Number Plate with clamp

Terminal Gantry

Single T/F Control Pannel

Feeder Control Pannel

33 KV Bus Isolator 800 Amp

33 KV Line Isolator 800 Amp

33 KV Post Insulator

Lightening Arrestor 33 KV

GI Pipe 6 inch Dia

Earth Mat of Switchyard of 33/11 KV S/S

Eathing of Indoor Equipment

Connector for L.I/B.I/L.A/VCB/CT/PT

Nut & Bolt

Painting of S/S Structure

Alluminium Paint

Red Oxid Paint

Cable Stand

Netural Stand

Copper L Piece M/O 50x8mm

T&P Kit for S/S

Sundrles

E-Braket for 33 KV Line

E-Braket for 11 KV Line

24 Volt Battery & Battery Charger with cabinet as per Market Value Industrial

PART-B (Erection Work)

Cartage, Fabrication & Erection of Single ST Pole (11 Mtr Long) for 33 KV, 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site with complete fitting. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Cartage, Fabrication & Erection of Double ST Pole (11 Mtr Long) for 33 KV, 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms.

Grouting of Poles with 1:4:8 CC ratio of cement, sand & brick ballast, backfilling of pits with mud completely. (All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Supply, Grouting nozzling & binding of stay sets with stay clamp complete fittings. (All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Conctreeing of Structures as per RESSPO Norms

Earthing Complete at HT/LT Pole as per RESSPO Norms.

Boring Type Earthing utpo water level Complete as per RESSPO Norms.

Chemical Earthing for Battery Charge as per RESSPO Norms.

Laying Stone in Switchyard as per Respo Norms

Carriage & Laying of 33 KV 3x300sqmm XLPE Cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. the two cables should be seprated by a partition of single bricks with Complete Fitting.

Laying of Double circuit 11 KV 3x300sqmm XLPE Cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. the two cables should be seprated by a partition of single bricks with Complete Fitting.

Laying of Double circuit 11 KV 3x185sqmm XLPE Cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. the two cables should be seprated by a partition of single bricks with Complete Fitting.

Cartage & Laying, stringing, sagging, binding & jumpering of ACSR Dog conductors of 33 KV, clamp and binding wire proper connector & Clamp (600 Mtr. For Bus Bar) (Complete Fitting.)

Laying, stringing, sagging, binding & jumpering of Panther Conductors of 33 KV line of necessory clamp and binding wire proper connector & Clamp (Complete Fitting.)

GI Strip for Structure and equipment earthing Complete

Installation of 24 Volt Battery & Battery Charger with cabinet as per Market Value Industrial

Laying of Control with Complete Fitting

Fixing of 33 KV Cable Jointing kit O/D

Fixing of 11 KV Cable Jointing Kit I/D 3x300sqmm XLPE Cable

Fixing of 11 KV Cable Jointing Kit O/D 3x300sqmm XLPE Cable

Fixing of 11 KV Cable Jointing Kit I/D 3x185sqmm XLPE Cable

Fixing of 11 KV Cable Jointing Kit O/D 3x185sqmm XLPE Cable

Fixing of Single T/F Control Pannel

Fixing of Connector for L.I/B.I/L.A/VCB/CT/PT

Fitting of Feeder Control Panel

Erection & Fixing of Eathing of Indoor Equipment

Installtion of CT O/D 33 KV CTR 200/100/1-1A

Installtion of CT O/D 33 KV CTR 400/200/1-1A

Installtion of 33 KV PT O/D 33 KV/110V

Cartage & Installtion of 11 KV Incomeing Switch Gear 600/300/5A, 350 MVA

Cartage & Installtion of 11 KV Outgoing Switch Gear 200/100/5A, 250 MVA

High Pressure testing of XLPE cable, Testing equipment will be arranged by the contractor.

Insllation of Terminal Gantry as Per Assign Attached.

Cartage & Fixing of 11 KV Bus Coupler

Cartage & Fixing of 33 KV VCB 1250A

Cartage & Fixing of 33 KV VCB 800A

Fixing & Installation of PT Structure as per Resspo Norms.

Fixing & Installation of CT Structure as per Resspo Norms.

Fixing & Installation of Main Bus Bar Complete with Structure

Fixing & Installation of Structure for Bus Isolator

Fixing & Installation of Structure for Line Isolator

Fixing & Installation of Structure for Post Insulator

Fixing & Installation of Structure for LA

Fixing of Lightening Arrestor for 33 KV Line

Fixing of Interlocking Bricks in Switchyard & approach Road (1.5x60sqmm) as per norms

Providing & Fixing of Sign Board and other sundery items of Sub Station as per norms

Fixing of Cable Stand as per norms

Fixing of Netural Stand as per norms

Commissing of 5 MVA T/F and VCB

Plinth and Foundation of VCB as per Respo Norms.

Plinth for Transformer with Rail Piece as per Respo Norms.

Welded Mesh Fencing with Gate Complete (40x48M) per Resspo Norms.

Fixing of 33 KV Bus Isolator 800 Amp

Fixing of 33 KV Line Isolator 800 Amp

Fixing of 33 KV Post Insulator

Fixing of Number Plate with clamp

Alluminium Painting work (ISI Mark Paint)

Red Oxide Painting work (ISI Mark Paint)

Fixing of Earth Wire Clamp

Fixing of PG Clamp for Dog/Panther Conductor

Fixing of Alluminium Tape

Mounting of 33/11 KV 5 MVA T/F with complete fitting.

Repairing of Trench Inside Control Room

Painting work of Sub Station Structure

Construction of Trench with Cover for Control cable

Construction of Trench with Cover for Power/Control cable

Repairing of Control Room/Store Romm/JE Staff Room/Toilet/Fixing of Supply water supply (Civil/Electrical works) as per norms

Dismantling of 3x1.5MVA T/F

Dismnatling of 3 Nos 3.3 KV Incoming VCB and 03 Nos 3.3 KV Outgoing VCB Pannel with Bus Coupler

Dismnatling of T/F and Control Pannel to Electricity Store Centre, Brh

M/S SMM INFRATECH PVT Ltd