Providing basic amenity to Pujari, Ningyagol,Vibhute, Bharmakindhi & Tangyankodi colonies coming under CBC Km No 58.50 reach in Hirekodi village of Chikodi Taluka Belagavi district.

Providing basic amenity to Pujari, Ningyagol,Vibhute, Bharmakindhi & Tangyankodi colonies coming under CBC Km No 58.50 reach in Hirekodi village of Chikodi Taluka Belagavi district.

code01 Clearing and Grubbing Road Land : Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earl... 18.24 100 m2

code02 Scarifying Existing Granular Surface to a Depth of 50 mm by Mechanical Means using Hydraulic excavator with all lead and lifts. 6134.00 Sqm

code03 Construction of Subgrade and Earthen Shoulders : Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreadi... 147.56 Cum

code04 Water Bound Macadam: Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling... 427.50 Cum

code05 Water Bound Macadam : Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rollin... 427.50 Cum

code06 Prime Coat over WMM/WBM : Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of ... 5700.00 Sqm

code07 Tack coat on Granular surface treated with primer: Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. wit... 5700.00 Sqm

code08 Open - Graded Premix Surfacing : Providing, laying and rolling of open - graded premix surfacing

of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen VG-30... 5700.00 Sqm

code09 Seal Coat : Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats with bituminous binder VG-30. Case... 5700.00 Sqm

code10 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface : Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflecto... 304.00 Sqm

code11 Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ... 203.00 Nos

code12 Kilometre Stone Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc Ordinary kilometer stone (precast) with... 2.00 Each

code13 Kilometre Stone Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc 200 m stone (precast) with all lead a... 7.00 Each

code14 Direction and Place Identification Signs upto 0.9 m2 Size Board : Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade shee... 1.08 Sqm

code15 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr... 12.60 Cum

code16 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes... 4.55 Cum

code17 Providing and laying insitu vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates with placing & sinking plums of size 150 to 80mm upto 15 percent for piers/ gr... 22.60 Cum

code18 Steel Fabrication : Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/... 0.24 t

code19 Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material i... 15.00 m