REPAIR OF TF PLINTH FENCING OF DT INSTALLATION OF LA AND LT PROTECTION

Amount

Supply of Decentralised materials given by Contractor. Note- Consumable Material (nut&bolt&clamp) which is given by contractor.

Supply of Nut Bolt with wahser diff size 16x65

Supply of LT shackle insulator

Supply of MS angle 1.5 inch

Supply of clamp for channel

Carriage of ACSR Dog conductor from store to site (Accroding to Estimate) with lodding and unlodding.

Errection/laying of ACSR Dog conductorwith all fitting as per respo Norms.

Carriage of 11 kv Lightning Arrestor from store to site (Accroding to Estimate) with lodding and unlodding.

Errection of 11 kv Lightning Arrestor with all fitting as per respo Norms.

Carriage of MS Earthing Rod of 20x2500 mm from store to site (Accroding to Estimate) with lodding and unlodding.

Errection of MS Earthing Rod of 20x2500 mm with all fitting as per respo Norms.

Carriage of Earthing Wire 6 SWG from store to site (Accroding to Estimate) with lodding and unlodding.

Errection of Earthing Wire 6 SWG with all fitting as per respo Norms.

All materials mentioned below required for Repair of transformer plinth and transformer fencing will be given by Contractor. Fine and coarse sand will be taken as per respo and 4 inch slab will be constructed top of the each plinth

cement

Stone ballast 0.4 cu.mtr for each plinth

ms channel 125x65 mm

ms Twisted Bar

Brick Balst required as per site

loading and unloading of TF from existing plinth including dismentlaing and then fitting followed by carrage of trolly transformer for alternate arrangement of supply

DT Fencing(6x6x6ft) Material will use as follows: 1. Iron 20x20x3 mm 2. Iron Strip 18x6 sqmm 3. Iron Net 20x20 sqmm 4. Concrete grouting foundation 08 no squre cross section 10x10 mm 05. Gate lock system for each fencing 06. Red Oxide and alu. paint

sundry

DAYA ENTERPRISES (BID ID -5232094)