SPECIAL REPAIR TO BLDG NO. T 03 BEHIND OFFRS MESS AT 20 CAMP SRC AT RAMGARH CANTT UNDER GE RAMGARH

Amount

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering, complete all as specified and directed.

Dismantling steel framed of trusses etc., span n.exc 10 metre, complete all as specified and as directed.

M & L for roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., and welding counter sunk for holes and necessary gusset plates etc and similar work conforming to Fe-410W (Gde E-250 quality A) complete all as specified and directed by Engr-in-Charge.

M & L rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle or other connecting plates conforming to Fe-410W (Gde E-250 quality A) complete all as specified and directed by Engr-in-Charge.

M & L for mild steel bolt purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washer and one hexagonal or square nut , exc. 30 cm long, dia of bolt exc 12mm and n.exc 20mm, complete all as specified and as directed.

M & L mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screw both ends; each screwed end to be fitted with washer and one hexagonal or square nut , n.exc. 10 cm long, dia of bolt exc 12mm and n.exc 20mm, complete all as specified and as directed.

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, 'U' hook or 'J' bolt, complete all as specified and directed.

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, 'U' hook or 'J' bolt, complete all as specified and directed.

Taking down cement plaster on brick wall or concrete surface etc.including raking out joints, hacking for key scrubbing down with water etc and removing of debris from site, complete all as directed.

M & L for rendering 15mm thick on fair faces of bricks/concrete surface work in cement mortar (1:4) finishing external surface even and smooth without using extra cement, complete all as specified and as directed.

M & L for plastering 15mm thick on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement in CM 1:6, complete all as specified and directed.

M & L for preparation of new plastered surfaces and applying two coats of 'Birla White wall care putty' or 'JK Wall Care putty' to make the entire surface free from undulations, complete all as specified and as directed.

M & L for preparing new putty wall surfaces, priming plastered and other surfaces with alkali resistant primer and applying two coats of oil bound distemper of any shade on wall surfaces, complete all as specified and as directed.

M & L for preparation of old surfaces of walls including washing, rubbing down and stopping of distempered surface and applying two coats of distemper oil emulsion over and including wall care putty of wall, complete all as specified and directed.

M & L preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparation of old treated plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.

M & L for one coat of synthetic enamel paint to wooden surface exceeding 10cm width or girth including preparation of old painted wooden surfaces complete all as specified and directed.

M & L for preparation of newly surfaces of steel of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed

M & L for preparation of old surfaces of steel of any description over 10 CM width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish of the premises complete all as specified and directed.

M & L for cement concrete type B1, 1:2:4 (using 12.5 mm graded aggregate) in levelling courses, coping, window cill etc., complete all as specified and directed.

M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exe. 0.18 sqm but n.exe. 0.36 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exe. 0.18 sqm but n.exe.0.36 sqm, in skirting & riser, over and including 10mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L glazed ceramic coloured tiles of size 375x250x7mm/450x300x7 mm thick as in dado/skirting etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles including 10 mm thick rendering in CM (1:3), complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping washing down with water to remove dust etc., complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 18-20mm thick over 20mm screed bed in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L granite (of any type) work (tabled rubbed and polished) of any shade 18 to 20 mm thick in cooking platform, steps, window, cills etc., over and including 15mm thick cement screed base in CM (1:4) laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab including rounding of slab and demolition of old slab where directed, complete all as specified and as directed.

Demolition of brick work build in cement mortar including all quoins, arches, pillars, etc. built in cement mortar complete all as specified and directed.

M & L brick work with sub class B old size bricks straight on curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-In-Charge .

All as per item No.29, here-in-before but except bricks.

M & L PCC 1:2:4, type B-1 (using 20mm graded aggregate) for bed block for fillings for hold fasts etc., complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking of shutter from the frame) of any descipriton n.exc 1.5 sqm each complete all as specified and directed by Engr-In-Charge .

Taking down chowkhat or frame with shutter (without taking of shutter from the frame) of any descipriton exc. 1.5 Sm but n.exc 4 sqm each complete all as specified and directed by Engr-In-Charge .

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engr-In-Charge .

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as specified and as directed.

M & L anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, window and ventilator shutters, fixed/sliding track, two or three track, aluminium partition including frames, glazing clips, cleats side hung type without sash bars, fixed window, ventilators etc., with one or more rebates including jointing cleat for fixing etc., complete all as specified and as directed.

S & F anodised aluminium door shutter powder coated (minimum thickness of powder coating 50 micron), aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing, rubber neoprene packing, handles 2 Nos in each door, anodised aluminium snap beading, screws, top rail, guide rails, complete all as specified by Engr-in-Charge.

S & F anodised aluminium window and ventilator shutters powder coated (minimum thickness of powder coating 50 micron), sliding, side hung type, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking arrangement, complete all as specified by Engr-in-Charge.

M & L for 4mm thick plain sheet glass area n.exc 0.50 Sqm in each pane fixed to aluminium frame work including rubber gasket etc.,, complete all as specified and as directed by Engr-In-Charge .

M & L for 5.5 mm thick plain sheet glass glass area exc 0.50 Sqm in each pane fixed to aluminium frame work including rubber gasket etc.,, complete all as specified and as directed by Engr-In-Charge .

S & F mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks etc., complete all as specified and directed by Engr-In-Charge .

S & F brass CP bracket fancy type suitable for fixing to 25mm dia curtain rod, complete all as specified and as directed.

S & F stainless steel tubing of 19/20 mm bore, 1.00 mm wall thickness as in curtain rod, including fixing brackets, stops, etc, complete all as specified and as directed by Engr-in-Charge.

S & F floor door stopper of aluminium anodised of size minimum 150mm long, complete all as specified and as directed.

Supply and fix 200mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

S & F aluminium alloy 100mm butt hinges with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed by Engr-In-Charge .

S & F aluminium alloy anodised sliding door bolts with hasp and staple and fixing clips of sheet, cast extruded section and fixing bolts and sliding bolts of extruded section on 300 mm long, complete all as specified and as directed.

S & F hydraulic regulated, designation No.2, door closer, suitable for door shutters of 701 to 850mm width and of weight of 36 to 60 Kg and fixed, complete all as specified and as directed..

S & F framed work such as grill grating etc with end of bars shouldered and/or riveted or forged into spikes framed guard bars barred iron doors, ladders etc. and similar works conforming to Fe-290 or E-165 including all necessary welding complete all as specified and directed by Engr-In-Charge.

S & F Aluminium anodised handles 150 mm long of cast type, complete all as specified and as directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) including cover fillet, complete all as specified and directed.

M & L for providing aluminium snap grid frame work for false ceiling with size 605x605 mm, using Main and cross tee of size 36.5mm x 25mm x 1.4mm, weighing 0.24 Kg/RM and 23.5mm x 26.4mm x 1.4mm weighing 0.191 Kg/RM respectively. The snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mm x 25 mm x 2 mm weighing 0.36 Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia mild steel wire/GI wire, J bolts, nuts and washers as per manufacturer's, complete all as specified and as directed.

M & L for asbestos fibre cement building board 4mm thick in ceiling fixed or laid/inserted to timber GI/Aluminium frame work with screw, complete all as specified and as directed.

Taking up and down GI tubing including GI fittings complete from trench/wall/ceiling/floor suitable for 15mm dia pipe, complete all as specified and as directed.

S & F for GI tubing medium grade including all types of fittings of ISI marked laid in trenches suitable for 15 mm bore, complete all as specified and as directed.

Refixing of GI tubing and connection including new GI fittings complete in trenches/wall/ceiling/floor suitable for 15 mm dia pipe, complete all as specified and as directed.

Taking up and down GI tubing including GI fittings complete from trench/wall/ceiling/floor suitable for 20mm dia pipe, complete all as specified and as directed.

S & F for GI tubing medium grade including all types of fittings of ISI marked laid in trenches/walls/floor or ceiling suitable for 20 mm bore, complete all as specified and as directed.

S & F bib tap, cast copper alloy chromium plated, fancy type, with capstan head handle screwed down, screwed for iron pipe to 15mm bore pipe after taking down of old brass bib tap, complete all as specified and as directed.

Disconnecting existing water tanks of capacity n.exc. 500, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required for reconnecting and re-fixing in position.

S & F 500 Ltr capacity rotational moulded polyethene water storage tanks in two layers, (cylinder vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and as directed.

M & L gun metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S & F in repair ball brass valve, high pressure, with polythene float and flynut complete, complete all as specified and as directed.

S & F in repair, Stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of bore 15mm fixed, complete all as specified and directed.

S & F in repair stop cock of 15mm bore , chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule, complete all as specified and directed.

S & F in repairs 10 litres capacity PVC low level flushing cistern including flush pipe, float valve, siphon etc, including 32 mm dia PVC flush pipe of required length, including two Nos. PVC brackets, complete with all fittings and making good the disturbed surfaces in CM (1:3), complete all as specified and directed by Engineer-in-charge.

S & F in repair vitreous china wash down water closet pan, Pedestal pattern and trap(excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc and including seat and cover for pedestal pan, complete all as specified and directed.

S & F in repairs water closet Vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rests (excluding flusing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage connection pipe etc complete making good disturb surface with existing finish of floor all as specified & directed by Engineer-in-Charge.

S & F in repair vitreous China wash hand basin, star white oval type, size 550X400mm including , 32 mm PVC waste pipe and 32 mm CP brass waste fitting, Cast iron brackets and PCC 1:2:4 type B-1 using graded stone aggregate for embedding brackets and making good disurbed surfaces in CM (1:3), complete all as specified and directed.Make:- Hindware/Parryware/Cera or of equivalent approved make.

S & F in repair 15 mm bore fancy type pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed.

M & L for PVC connections 15 mm size of approved quality with brass check nuts at both ends of length 450 mm, complete all as specified and as directed.

S & F, 110mm bore PVC (SWR) bends any radius with rubber ring joints, complete all as specified and as directed by Engineer-in-charge.

S & F in repair, 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors,complete all as specified and as directed by Engineer-in-charge.

S & F, 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, complete all as specified and as directed by Engineer-in-charge.

S & F, 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches, complete all as specified and as directed by Engineer-in-charge.

S & F, 75mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-charge.

S & F PVC (SWR) 110 mm bore junction single, (Single T) equal or unequal, complete all as specified and as directed.

S & F PVC (SWR) 75 mm bore junction single, (Single T) equal or unequal, complete all as specified and as directed.

S & F PVC (SWR) 110 mm bore junction double, (double T) equal or unequal, complete all as specified and as directed.

S & F PVC (SWR) 75 mm bore junction double, (double T) equal or unequal, complete all as specified and as directed.

S & F 110mm bore PVC(SWR) vent Cowl complete all as specified and directd.

S & F 75 mm dia outlet PVC(SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and as directed.

S & F 4 lever mortice lock vertical type size 65 mm long, complete all as specified and as directed.

S & F MS ordinary rat tail rod pattern springs 300 mm including roller and roller plate complete, complete all as specified and directed by Engineer -In-Charge.

M & L Chowkhat 2nd class hard wood and frames wrought, framed rebated on the solid rounded or chamfered , put together with glue pinned at joints complete all as specified and directed by Engr-In-Charge

M & L painting on new wooden based surfaces of any description not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-In-Charge .

M & L for hold fast; wall ties; hooks for hanging fans; plan angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde E-165, complete all as directed.

S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, supplied and fitted to chowkhats, complete all as per specified and directed.

Suply and fix in repairs stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantilever brackets connecting union overall size 915 X 460 mm with bowl size 410 X 352 X 178 mm or 405 X 355 X 178 mm complete all as specified and directed.(Make: model No-BSSBSD-52 of Blue Star or equivalent Prayag polymer pvt ltd / Nirali) or equivalent make as approved.

S & F in repair brass chromium plated shower rose 125 mm size fancy type with or without swivels joints fixed to iron pipe etc., complete all as specified and as directed.

S & F of CP health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including connections and fixed in position, complete all as specified and directed.

S & F in repair 15mm dia central hole basin mixer with U shaped round crater spout with 450 mm long braided hoses (hot & cold), complete all as specified and as directed.

M & L for anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar (1:2) (1 cement:2 coarse sand) to match the existing floor, complete all as specified and as directed.

M & L for anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc., in apron, complete all as

M & L for anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 Lit/hole by drilling 6mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same, complete all as specified and as directed.

Demolition of cement concrete in ground floors & paving n.exc 15cm thickness (below or above ground level) complete all as directed by Engr-in-Charge

M & L for providing 75 mm thick cement concrete 1:4:8 type D-2 (Using 40mm grade stone aggregate) as in sub floor , sub base of floor finished even and rough complete all as specified and directed.

M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 using 20mm graded stone aggregate as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 and sand in the ratio 1:3, complete all as specified and directed.

M & L for 50 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in flooring, finish even and smooth using extra cement, complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floor, aprons, etc., , complete all as specified and directed.

M & L for anti-fungal chequered cement concrete tiles 30cmX30cm X 22mm to 25mm thick set and jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 20mm thick cement screed bed in cement mortar (1:6) complete all as specified & directed.

Supply only 28mm wide glass dividing strip, 3mm thick, complete all as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket bell or power) complete with all fitting such as batten, switch, ceiling rose, pendant, regulator, socket and brackets switch fuse etc removing materials from site and making good disturbed surfaces of walls, floors etc to match the existing surface all as directed .

M & L for point wiring for one light/fan/exhaust fan point bell controlled by one way switch 5 Amp with 1100 volt, 1.5 Sq mm multi stranded FRLS copper conductor cable with continuous earth wire of 1.5 Sq mm multi stranded copper FRLS conductor cable PVC insulated unsheathed drawn in and including concealed rigid non metallic PVC conduit medium grade with fitting (ISI marked) not less than 20mm dia & sunken anodized pressed steel sunken bore made out of not less than 1.6mm thick sheet, with bakelite sheet 2.8 mm thick laminated cover make sheet for housing/fixing switches etc., complete all as specified and directed.

All as per item No 105 here-in-before but one 5 Amp socket outlet on the same board.

All as per item No 105 here-in-before but one 5 Amp socket outlet on independent board.

M & L for point wiring for 15 Amp power controlled by one 15 Amp switch with 1100 volt, 2.5 Sq mm multi stranded FRLS copper conductor cable with continuous earth wire of 2.5 Sq mm PVC insulated unsheathed drawn in and including concealed rigid non metallic PVC conduit medium grade with fitting (ISI marked) not less than 20mm dia & sunken anodized pressed steel sunken bore made out of not less than 1.6mm thick sheet with bakelite sheet 2.8 mm thick laminated cover make sheet for housing/fixing switches etc., complete all as specified and directed.

S & F switch piano flush button single pole one way 5 Amp, complete all as specified and as directed.

S & F Switch socket combination 2 in 1, 3 pin, 5 Amp and 15 Amp flush type, universal, complete all as specified.

S & F Switch socket combination 2 in 1, 3 pin, 5 Amp flush type, universal, complete all as specified.

S & F Switch socket outlet 2 in 1, 3 pin, 5 Amp flush type, universal, complete all as specified.

Supply and fix ceiling rose three terminals PVC/ Polycarbonate, isolated body complete all as specified.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc, complete all as specified.

S & F lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked), complete all as specified.

S & F LED Bulb of capacity 15 Watts lumen output (500) length 102 mm dia 56 mm base cap B22, (ISI marked) complete with all accessories base (ISI marked) all as specified and directed by Engr-in-Charge. Cat Part no. LHLDDEEEML8R015 of Havells or its equivalent Of make Bajaj/Phillips/Crompton Greaves, complete all as specified and as directed.

S & F in repair retro LED light fitting 1 x 22, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting, complete all as specified and as directed by Engr-in-Charge. Make: Havells/Bajaj/Crompton Greaves/Phillips.

S & F bulkhead luminaire comprising of high brightness LEDs, 1x9W/1x10W LED, IP-65, complete all as specified and as directed. Make: Havell/Bajaj/Phillips/Crompton Greaves.

S & F in repair LED light fitting mirror type with high output diffuser 2 feet 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. Make: Havell/Bajaj/Phillips/Crompton Greaves.

S & F exhaust fan, steel body AC single phase, 230V of size 300 mm sweep with blades and frame and louvers, complete all as specified and as directed. Make: HAVELLS/BAJAJ/USHA/CROMPTON GREAVES/KHAITAN.

S & F sheet metal enclosures for DBs when MCBs to used single pole and neutral (SPN) double door 240 volts, 8 way with IP-43 IK-09 protection including 200 Amp bus bar and neutral link (ISI marked), complete all as specified and as directed.

S & F amp rating 240V, 10 kA 'B' Curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 32 Amp in the MCB DB complete with connection testing and commissioning all as specified and as directed. Make: Indo Asian or its equivalent make in Havells/Standard/L&T.

S & F sheet metal enclosures for DBs when MCBs to be used in vertical tipple pole and neutral (VTPN) double door 415 volts, 6 way, with IP-43 IK-09 protection including 200 Amp rated bus bar and neutral link (ISI marked), complete all as specified and as directed.

S & F 415V, 10 kA 'B' Curve miniature circuit breaker (MCB) of TPN and current carrying capacity 100 Amp in the DB complete with connection testing and commissioning all as specified and as directed. Make: IndoAsian or its equivalent make in Havells/Standard/L&T.

S & F 240V, 10 kA 'B' Curve miniature circuit breaker (MCB) of SP and current carrying capacity 5 to 32 Amp in the MCB DB complete with connection testing and commissioning all as specified and as directed. Make: IndoAsian or its equivalent make in Havells/Standard/L&T.

M & L Sub main wiring two single core 6.0 Sqmm PVC insulated FRLS multistanderd copper conductor cable and one run of 6.0 Sqmm PVC insulated unsheathed FRLS multi stranded copper conductor cable for earth wire drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia, complete and making good disturbed surface wall complete all as specified and as directed. Note : - Not : 2 runs of 6 Sqmm cable, 1 run of earth wire 6 sqmm and PVC counduit shall be measured as one unit length.

Supplying and laying and testing cable XLPE insulated, sceened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts with stranded aluminium conductor of size 50 Sq. mm 3.5 core nominal cross section, complete all as specified and as directed.

Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth and getting out for laying pipes as in soft and loose soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm, complete all as directed.

Removing excavated materials n.exc. 50 m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as directed.

M&L for reinforced precast concrete cable cover class LV, type 1, flat, size 250 mm x 150 mm x 40mm all as specified and directed.

M & L for sand cushioning for protection of underground cables, consolidated and compacted with clean dry sand all as specified and as directed by Engr-in-Charge. (Note: The depth of sand shall be measured after puning only)

Supply and laying GI pipe 50mm bore light grade with fitting for cable protection at road crossing/under concrete including taking down of old one, complete all as specified and as directed.

M & L ,for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts check nuts & washers of galvanised iron or steel, protected by GI pipe 15 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and PCC of chamber and coping shall in 1:3:6 type C-1 using 20 mm graded stone aggregate including excavation and earth work and removal of surplus soil and filling with black cotton soil upto ground level complete all as shown in electrical plate No 3 of SSR Pt-I, 2009 with CI cover 10mm thick of size 300x300mm with charcoal dust and common salt in alternate layer of 15 cm surrounding the plate complete and earth lead connected to DB board, including testing complete all as specified and directed. Note : Earth test result should not less than one ohm.

S & F sheet metal enclosures Single pole and neutral (SPN), with a two pin and earth plug and socket with one single pole MCB 20 Amps, complete all as specified and as directed.

SITAL AND SONS

M/S Parmar Construction

M/s Ray construction

M/S SHAMBHU SHARAN SINGH

upadhyay engineers and consultant