AUGMENTATION OF WATER AND ELECTRIC INFRASTRUCTURE AT NAGTALAO (JOB NO 005/AMWP/12C/2019-20)

Amount

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 27 (R)

Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTHWORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 28

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 29 (R)

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 31(R)

Lump sum price worked out by the contractor for "ROAD & PATH" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 33

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 35

Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 36

Lump sum price worked out by the contractor for "SECURITY FENCING & GATE" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 39

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 40

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 42 (R)

Lump sum price worked out by the contractor for "DG SET" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 43

Sch 'A' PART-XII (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.

INTERNAL ELECTRIFICATION S&F decorative box type LED tube light fitting 1x20 watt including LED tubular lamp with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed.

S&F energy saving 7 watt LED bulb complete all as specified and directed.

S&F ceiling fan 1200mm sweep energy efficient five star rated incl down rods and connecting up with 3 runs of 1.5 sq mm, single core PVC insulated but unsheathed, FRLS cable with multistranded copper conductors IS 694 marked, from ceiling rose to fan complete all as specified and directed.

S&F heavy duty, exhaust fans of 300 mm sweep suitable for SP 230/250 v 50 Hz AC supply complete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed.

S&F heavy duty, exhaust fans of 450 mm sweep suitable for SP 230/250 v 50 Hz AC supply complete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed.

S & F LED Security light fitting wattage not exceeding 30 W and minimum lumen output 2500 lumens, efficiency 100 Lum/Watt with pressure die cast aluminium housing, heat resistance glass, IP 65 protection complete and including connecting up with twin core twisted flexible copper conductor cable with suitable size including GI tubing 40mm dia light grade 1.5m long band to shape for mounting of security light with 2 nos MS clamps with nut bolts etc complete all as specified and as directed. Notes:- (i) The LED lights shall have gurantee for 5 Years from date of completion of contaract , any defects noticed during this period shall have be rectified / Parts replaced immediately, security amount of 10% of the cost of the item shall be retained with the Deptt till end of the guarantee period. (ii) LED light manufacturer lab shall be accredited to NA

S&F of MCBs, of following capacity, IS-8828 marked of the undermentioned type and rating and fixing in DBs (DBs catered separately in this Schedule)

SP MCB 6 to 32 Amp 10 KA rupturing capacity 240 Volts C series

DP MCB 6 to 32 Amp 10 KA rupturing capacity 240 Volts C series

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete.

NOTE FOR ITEM NO. 20.00:- Rate quoted by tenderers shall be deemed to include for following provisions:- [i] Excavation & earth work in any type of soil including removing of surplus material upto 50 Mtr. [ii] PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles. [iii] Main earthing lead from earth electrode to test point upto 7.5 mtr. [iv] Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd. [v] GI protection pipe of size 15 mm bore light grade 7.5 mtr.

ROAD & PATH M&L for 150 mm thick (compacted thickness) WMM in two layers each of 75 mm thick (each layer to be rolled and consolidated separately) confirming to the grading given in Table 400-13 & physical requirment given in Table 400-12 spread with mechanical means & rolled by using 8 to 10 ton vibratory power roller over compacted sub grade surface as specified in clause 406.3.5 of MORT&H specification complete all as specified & directed.

S&F speed hump (Breaker) of size 600mm wide in colours PVC moulded type with arrangements of highly reflectors on both sides fixed to road surface with epoxy/iron nails as per manufacturer instruction complete all as specified and directed.

S&F solar stud cat eyes of size 132.5mm x 122.5mm x 20mm in red colours made of aluminium alloy powdered by mono crystal solar panel moulded with one high capacity Ni cad battery and backup of 12 hours continious plingly light at night complete fixed to road surface with epoxy/iron nails Make:- DARK EYE/3M/TATA BP

S&F delinator of size 700x100x50mm made of ABS round body fitted with two nos. 100mm dia highly reflective reflector, duly UV stabilized, in yellow colour, provided with Test Certificate from CRRI New Delhi, mounted on MS pipe 50mm dia, provided with anti rust and anti theft net including excavation in post holes of size 30cmx 30cmx45cm and filling with PCC 1:2:4 type B1 using 20mm graded stone aggregate and making good all as specified & directed by Engineer-in-Charge.

M&L for cleaning and preparation of Road or concrete surface for making center line, stop line, dashes, arrows, brackets & similar works with 2.0mm thick white/yellow colour hot applied IRC pattern thermo plastic paint (Confirming to BIS 3262-1989) of approved quality and make with 8% glass beads laid on the surface at temperature 160 degree Celsius with a special applicatomachine complete. (use of 5 Kg thermo plastic material per Sqm) including traffic diversion arrangement all as specified & directed by Engineer-in-charge.

M&L for stone edging of roughly rectangular sand stone patti 50mm thick, not less than 30 cm wide(depth) and 50 to 60 cm length of each patti (along the road) and meeting edges of stone hammer dressed so that the maximum depression from straight edge held against the dressed surface shall not exceed 20mm placed on edge firmly in position closely abutting and setting right the edge stone patti in line complete wity & including necessary excavation & earth work required if any in any type of soil all as specified and directed (depth of edging shall be equal to width of patti).

EXTERNAL WATER SUPPLY Supply and lay pipe ductile Iron , S/S including specials, Class “K-9”(As per IS-8329-2000 Table 4.4), 200 mm (8”) dia complete all as specified and directed. (Cost of rubber gasket (one no. per piece) is included in quoted rate).

Supply and lay pipe ductile Iron , S/S including specials, Class “K-9” (As per IS-8329-2000 Table 4.4), 150 mm (6”) dia complete all as specified and directed. (Cost of rubber gasket (one no. per piece) is included in quoted rate).

Supply and lay pipe ductile Iron , S/S including specials, Class “K-7” ,100 mm (4”) dia complete all as specified and directed. (Cost of rubber gasket (one no. per piece) is included in quoted rate). Note : Applicable for item No 27.00 to 30.00 above (a) All restrained joints are for underground application. (b) Restraining length depends on Soil type, backfill compaction, pipeline profile and working pressure. However, minimum requirement of restrained length for each side of bend is equal to 20 feet normally with 01 restrained joint at the fitting and also restrained joints at bend.

Supply and fix Sluice valve PN 1.6 of Ductile Iron body having size of 200 mm bore with S V (with wheel) Stem-S.S. (IS 6603 12CR13) , Internals- Gun Metal (IS:318 LTB2) , Standard-IS 14846:2000 , Drilling as per IS 1538 , Body tested for pressure 24 Kg/Sqcm and seat tested to 16 Kg / Sqcm including all petty items required for fixing complete all as specified and directed.

Supply and fix Sluice valve PN 1.6 of Ductile Iron body having size of 150 mm bore with S V (with wheel) Stem-S.S. (IS 6603 12CR13) , Internals- Gun Metal (IS:318 LTB2) , Standard-IS 14846:2000 , Drilling as per IS 1538 , Body tested for pressure 24 Kg/Sqcm and seat tested to 16 Kg /Sqcm including all petty items required for fixing complete all as specified and directed.

Supply and fix Sluice valve PN 1.6 of Ductile Iron body having size of 100 mm bore with S V (with wheel) Stem-S.S. (IS 6603 12CR13) , Internals- Gun Metal (IS:318 LTB2) , Standard-IS 14846:2000 , Drilling as per IS 1538 , Body tested for pressure 24 Kg/Sqcm and seat tested to 16 Kg /Sqcm including all petty items required for fixing complete all as specified and directed.

Supply and fix Air release valve (Double Action) PN 1.6 of Ductile Iron body having size of 200 mm bore Type G&K Brass Nut, Linings Natural Rubber Moulded on wooden Balls Drilling as per IS 1538 , Body tested for pressure 15 Kg/Sqcm including all petty items required for fixing complete all as specified and directed.

Supply install, commissioning and testing of centrifugal pumpset of capacity 25 HP, discharge 113 cum/Hr at the head of 35 Mtr, Wilo make horizontal end suction (o1 stage) pump model NL-80/160 with CI casing, bronze impeller, S.S shaft, Mech Sealed. Kirlosker/CG suitable make 25 HP, 2900 RPM, 3 Phase, 415 Volt TEFC AC motor with MS base frame and all accessories like coupling nut, bolts, gland packing, washers or any other petty items required for fixing complete all as specified and directed.

M&L for construction of brick mesonary valves chamber of size 1200 x 1200 x 1000 mm ( Internal dimensions ) with 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate15 mm thick rendering in CM 1:4 to internal walls, floors and upto 150 mm depth below ground level to external walls,including provision of 3 mm thick MS Sheet cover fixed to MS angle iron frame made out of 40 x 40 x 4 mm thick angle iron with necessary MS flat iron stiffeners of size 40 mm x 4 mm including prparation of all steel surfaces and applying two coats of synthetic enamel paint over one coat of red oxide primer and provision of locking arrangement including necessary excavation and earth work in any type of soil complete all as specified and directed.

Supply & Fix FR insulated single core stranded unsheathed industrial flexible cable copper conductor of size 10 sqmm, 1100 Volts grade as per IS 694:1990. complete all as specified and directed.

Supply and fix Perforated GI Cable tray of 300 mm width and 2500 mm length , having 16 guage complete fixed to Wall or laid in floor to run the cable etc with suitable clamp and spacers for protection of cable complete all as specified and directed.

M & L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized iron strip earth 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of protection pipe galvanized iron 40 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete as detailed below and all as directed.

NOTE FOR ITEM NO. 39.00:- Rate quoted by tenderers shall be deemed to include for following provisions:- (i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC M25 design mix using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 5 of MES SSR Part-I. (ii) Item includes the cost of 7.5 M GI pipe for protection of earth wire. Any variation in length shall be adjusted through deviation order. (iii) Item includes cost of 7.5 M earth GI earth strip 32 x 6mm. Any variation in length shall be adjusted through deviation order. (iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc.

Supply, Install, testing and commissioning of LT panel from CPRI tested firms, outdoor type totally enclosed with front opening hinged doors with projected top and raised platform of suitable size weather, dust, vermin and water proof made out of CRCA sheet 3.15 mm thick including aluminium bus bar for 3 phase, 415 volts of capacity 300 Amps and one neutral sleeved with coloured sleeves insulation complete painting with powder coated paint including marking by paint of outgoing supply to various locations for identifiaction .complete all as specified including the following accessories:- Note:- Initial drawing and design of the panel will be approved by AGE (I) (ii) Suitable size of Stand for LT Panel made of MS angle iron duly painted with black colour in two coats over one coat of red oxide primer is deemed to be inclusive of quoted rates..complete all as specified including the following accessories:-

INCOMER (a) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 25 KA. - 01 No. (b) Digital Voltmeter 0-500 volts. - 01 No. (c) Digital Ammeter 0-500 Amps. - 01 No. (d) Phase indicator lamps (R-Y-B) LED type - 01 Set. OUTGOING (a) MCCB 4 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 25 KA. - 03 Nos. (b) MCB SPN 6 -32 Amps, 10 KA, 240 V. - 04 Nos. (c )ON LOAD change over switch 415V 4 pole of capacity 63 Amps. (d) Soft starters suitable for 25 HP Motor -03 Nos

EXTERNAL ELECTRIFICATION M&L for sand cushioning to under ground cable using tibba sand and gently punning to cushioning to cable complete all as specified and directed. (Note:- For the purpose of payment only punned thickness will be measured. )

Material and labour for Jodhpur stone slab for protection of under ground cable 25 to 30 cm wide, 40 to 50 mm thick and not less than 60 cm in length with gap between adjacent slab n.exc 10 mm over underground cable laid dry and abbuting each other complete all as specified and directed..

S&F cable path indicator for HT cable made out of cast iron plate of 100mm dia, 6 mm thick engraved with "HT 11000 volts" welded to MS angle 50x50x6mm, 75cm long embedded in PCC block (1:3:6) type C-2 of size 30x30x30cm including painting with two coats of Brown colour synthetic enamel paint over one coat of red oxide primer and necessary earth work complete all as specified and as directed.

Supply, installation, testing & commissioning of 11 KV, 630 Amps, 20kA/3-sec extensible Indoor type SF6 gas insulated 630 Amp Copper busbar Compact Switchgear comprising of 2no. Load Break Switch + 4no. outgoing VCB arrangement with associated metering module as details below. All LBS/VCB shall be enclosed in non magnetic, non ferrite IP67 Stainless Steel tank filled with SF6 gas with, leak rate less than 0.1% and tested for internal arc fault of 20kA for 01-second as per latest IEC 62271-200 standard. Each VCB shall be provided with high-endurance mechanisms to achieve more than 2000 close-open operations and mechanically latched push buttons to meet frequent operating requirements. VCB, VI FPI, Relay and RMU should be of same make. The unit shall include the following with all necessary standard fitting required at site:-

02 Nos Load Break Switches module each consisting of following accessories (a) 11kV, 630A Load Break Switch with interlocked line-switch of making capacity, short circuit current - 20kA/3-sec, Making Capacity - 50kAp - 01 No (b) Auxiliary contacts - 1NO + 1NC - 01 No (c)Spring-assisted snap-action manual operating mechanism along with interlocked earthing switch with independent operating access - 01 No (d) Each module having set of 03Nos. Cable terminals with site-replacable cable bushings situated not beyond 300mm from cable-cover to allow ease of access for installation/testing/replacement purposes, with interlocked door to prevent access of upto 11KV, 300 Sqmm, 3 Core , XLPE AL cable termination in live-condition, along with suitable clamping-plate and copper earthing-bar for grounding the cable braid. (e) Right angle boots (push on type) : Each Set of 03 (f) Arc proof cable covers having cable entry from bottom, front with Interlocking mechanism including earth switch - 01 No (g) Capacitive voltage indication fixed type system with LED - 01 Set (h) Fault Passage Indicator - It shall be provided for each incomer load break unit, FPI with LED/digital display to be added for detection of cable fault - 01 No (j) ON, OFF, EARTH mechanical indication on the front mimic of the panel - 01 No

04Nos. Outgoing, VCB module, each having (a) 11kV, 630A, 20kA, fixed type Vacuum Circuit Breaker with series disconnector-cum-earthing Switch and Mechanical ON/OFF/EARTH/Spring Charge Indication (b) Manually spring-charged, high-endurance mechanism with integrated spring-charging handle and distinct, mechanically latched ON/OFF push-button suitable for frequent operation. (c)Each module having set of 03Nos. Cable terminals with site-replacable cable bushings situated not beyond 300mm from cable-cover to allow ease of access for installation/testing/replacement purposes, with interlocked door to prevent access of 11KV, 120Sqmm, 3Core, XLPE AL cable termination in live-condition, along with suitable CT-mounting plates, clamping-plate and copper earthing-bar for grounding the cable braid. (d) “Live Cable” LED Indicators thru Capacitor Voltage Dividers mounted on the bushings. (e) Auxiliary contacts of VCB position, 1NO+1NC - 01No. (f) Shunt tripping and closing coils of continuous duty (24VDC) - 01No. Each (g) Flush-Mounted, numerical, aux. powered, 03-OverCurrent+01-EarthFault Feeder Protection Relay of same make as VCB, providing OverCurrent (LowSet: 10%-250% / HighSet: 20%-2500%), Earth-Fault (LowSet: 10%-200%/HighSet: 50%-1250%), Three Phase Inrush Detection, CktBrkr Control, TripCkt Supervision, Three Phase & Residual Current Measurement, Non-Volatile memory for 100-event log, five-fault-record with time-stamp, Local LCD display, user programmable DI/DO and plug-out type CT-connector with auto CT-shorting for operator safety - 01no. (h) Right angle boots (push on type) : Each Set of 03 (j) Breaker ON/OFF/TRIP LED Indication - 01 set (k) Digital Multifunction Meter with Acc.Cl.1.0 - 01No. (l) Set of 03Nos. Ring Core Protection CTs having ratio 40/1, 2.5VA, 10P10 (m) Set of 03Nos. Ring Core Metering CTs having ratio 50/1, 2.5VA, Cl.1.0

Metering Module - 01No., comprising of (a) Bus-Connected Voltage Transformers having ratio 11kV/rt3:110V/rt3, 25VA, Class 1.0 connected in Star-Star formation, with HRC Fuses for isolation on HT side and MCBs on LT side - Set of 03 Nos. (b)Digital Voltmeter for measurement of busbar voltage (Cl.1.0) - 01No. (c) R-Y-B Phase LED Indication - 01 set (d) Anti-condensation space-heater with thermostat (230VAC) - 01No. Additional items mounted on panel or delivered seperately, (a) Operating Handle for Connection/Disconnection/Earthing of Line - 01No. (b) Integrated Manometer for monitoring gas-pressure connected to main tank with provision of gas-refilling at site. - 01No. (c) 2x12V DC Battery+Charger Scheme with sufficient juice to provide DC power backup to the relays of the entire board for 4-hours and ensure at least 5 ON/OFF operation of each VCB (230V AC supply to charger shall be ensured by contractor) - 01No. (d)3-pin sockets and LED Illumination Lamps as required as per manufacturer recommendation and approved by Engineer-in-charge Notes:- (i) It shall be preferable to have upto 05Nos. feeders inside single stainless steel compartment to prevent chances of failure due to plug-in coupling arrangement. (ii) Necessay interclocking arrangement shall be provided for safety and operations (iii) Above switchgear shall confirm to relevant IEC (62271-200) for design, manufacturing and internal arc compliance. No claims towards internal arc compliance, number of mechanical/electrical/short-circuit operations, gas-leakage rates etc. shall not be entertained and contractors quoted rates shall be deemed included these provisions. (iv) Cost of Provision of Plinth for RMU shall be deemed included in the unit rate quoted by the contractor.

Supply, installation, testing & commissioning of 11 KV, 630 Amps, 20kA/3-sec extensible Indoor type SF6 gas insulated 630 Amp Copper busbar Compact Switchgear comprising of 2 Nos. Load Break Switch + 3 Nos. outgoing VCB arrangement with associated metering module as details below. All LBS/VCB shall be enclosed in a common, robotically welded minimum 2.5 mm thick non magnetic, non ferrite IP67 Stainless Steel tank filled with SF6 gas with, leak rate less than 0.1% and tested for internal arc fault of 20kA for 01-second as per latest IEC 62271-200 standard. Each VCB shall be provided with high-endurance mechanisms to achieve more than 2000 close-open operations and mechanically latched push buttons to meet frequent operating requirements. VCB, VI and RMU should be of same make.The unit shall include the following with all necessary standard fitting required at site:-

02 Nos Load Break Switches module each consisting of following accessories (a) 11kV, 630A Load Break Switch with interlocked line-switch of making capacity, short circuit current - 20kA/3-sec, Making Capacity - 50kAp - 01 No (b) Auxiliary contacts - 1NO + 1NC - 01 No (c)Spring-assisted snap-action manual operating mechanism along with interlocked earthing switch with independent operating access - 01 No (d) Each module having set of 03nos. Cable terminals with cable bushings situated not beyond 300mm from cable-cover to allow ease of access for installation/testing/replacement purposes, with interlocked door to prevent access of upto 11KV, 300 Sqmm, 3 Core , XLPE AL cable termination in live-condition, along with suitable clamping-plate and copper earthing-bar for grounding the cable braid. (e) Right angle boots (push on type) : Each Set of 03 (f) Arc proof cable covers having cable entry from bottom, front with Interlocking mechanism including earth switch - 01 No (g) Capacitive voltage indication fixed type system with LED - 01 Set (h) Fault Passage Indicator - It shall be provided for each incomer load break unit, FPI with LCD display; self reset with 1 No, contact for status on SCADA with LED/digital display to be added for detection of cable fault - 01 No (j) ON, OFF, EARTH mechanical indication on the front mimic of the panel - 01 No

03 No. Outgoing, VCB module, each having (a) 11kV, 630A, 20kA, fixed type Vacuum Circuit Breaker with series disconnector-cum-earthing Switch and Mechanical ON/OFF/EARTH/Spring Charge Indication (b) Manually spring-charged, high-endurance mechanism with spring-charging handle and distinct, mechanically latched ON/OFF push-button suitable for frequent operation. (c) Each module having set of 03nos. Cable terminals with site-replacable cable bushings situated not beyond 300mm from cable-cover to allow ease of access for installation/testing/replacement purposes, with interlocked door to prevent access of 11KV, 120Sqmm, 3Core, XLPE AL cable termination in live-condition, along with suitable CT-mounting plates, clamping-plate and copper earthing-bar for grounding the cable braid. (d) “Live Cable” LED Indicators thru Capacitor Voltage Dividers mounted on the bushings. (e) Auxiliary contacts of VCB position, 1NO+1NC - 01No. (f) Shunt tripping and closing coils of continuous duty (24V DC) - 01No. Each (g) Flush-Mounted, numerical, aux. powered, 03-OverCurrent+01-EarthFault Feeder Protection Relay of same make as VCB, providing OverCurrent (LowSet: 10%-250% / HighSet: 20%-2500%), Earth-Fault (LowSet: 10%-200%/HighSet: 50%-1250%), Three Phase Inrush Detection, TripCkt Supervision, Three Phase & Residual Current Measurement, Non-Volatile memory for 100-event log, five-fault-record with time-stamp, Local LCD display, user programmable DI/DO and plug-out type CT-connector with auto CT-shorting for operator safety - 01No. (h) Right angle boots (push on type) : Each Set of 03 (j) Breaker ON/OFF/TRIP LED Indication - 01 set (k) Digital Multifunction Meter with Acc.Cl.1.0 - 01No. (l) Set of 03Nos. Ring Core Protection CTs having ratio 40/1, 2.5VA, 10P10 (m) Set of 03Nos. Ring Core Metering CTs having ratio 50/1, 2.5VA, Cl.1.0 Metering Module - 01No, comprising of (a) Bus-Connected Voltage Transformers having ratio 11kV/rt3:110V/rt3, 25VA, Class 1.0 connected in Star-Star formation, with HRC Fuses for isolation on HT side and MCBs on LT side - Set of 03Nos. (b)Digital Voltmeter for measurement of busbar voltage (Cl.1.0) - 01No. (c) R-Y-B Phase LED Indication - 01 set (d) Anti-condensation space-heater with thermostat (230VAC) - 01No.

Additional items mounted on panel or delivered seperately, (a) Operating Handle for Connection/Disconnection/Earthing of Line - 01No. (b) Integrated Manometer for monitoring gas-pressure connected to main tank with provision of gas-refilling at site. - 01No. (c) 2x12V DC Battery+Charger Scheme with sufficient juice to provide DC power backup to the relays of the entire board for 4-hours and ensure atleast 5 ON/OFF operation of each VCB (230V AC supply to charger shall be ensured by contractor) - 01No. (d) 3-pin sockets and LED Illumination Lamps as required as per manufacturer recommendation and approved by Engineer-in-charge Notes:- (i) Necessay interclocking arrangement shall be provided for safety and operations (ii) Above switchgear shall confirm to relevant IEC (62271-200) for design, manufacturing and internal arc compliance. No claims towards internal arc compliance, number of mechanical/electrical/short-circuit operations, gas-leakage rates etc. shall not be entertained and contractors quoted rates shall be deemed included these provisions. (iii) Cost of Provision of Plinth for RMU shall be deemed included in the unit rate quoted by the contractor.

Supplying, installation, testing & commissioning of 11 KV, 630 Amps, 20kA/3-sec extensible Indoor type SF6 gas insulated 630 Amp Copper busbar Compact Switchgear comprising of 2no. Incoming Load Break Switch + 2no. outgoing VCB arrangement with associated metering module as details below. All LBS/VCB shall be enclosed in a non magnetic, non ferrite IP67 Stainless Steel tank filled with SF6 gas with, leak rate less than 0.1% and tested for internal arc fault of 20kA for 01-second as per latest IEC 62271-200 standard. Each VCB shall be provided with high-endurance mechanisms to achieve more than 2000 close-open operations and mechanically latched push buttons to meet frequent operating requirements. VCB, VI FPI, Relay and RMU should be of same make. The unit shall include the following with all necessary standard fitting required at site:-

02 Nos Load Break Switches module each consisting of following accessories (a) 11kV, 630A Load Break Switch with interlocked line-switch of making capacity, short circuit current - 20kA/3-sec, Making Capacity - 50kAp - 01 No (b) Auxiliary contacts - 1NO + 1NC - 01 No (c)Spring-assisted snap-action manual operating mechanism along with interlocked earthing switch with independent operating access - 01 No (d) Each module having set of 03nos. Cable terminals with cable bushings situated not beyond 300mm from cable-cover to allow ease of access for installation/testing/replacement purposes, with interlocked door to prevent access of upto 11KV, 300 Sqmm, 3 Core , XLPE AL cable termination in live-condition, along with suitable clamping-plate and copper earthing-bar for grounding the cable braid. (e) Right angle boots (push on type) : Each Set of 03 (f) Arc proof cable covers having cable entry from bottom, front with Interlocking mechanism including earth switch - 01 No (g) Capacitive voltage indication fixed type system with LED - 01 Set (h) Fault Passage Indicator - It shall be provided for each incomer load break unit, FPI with digital display self reset with 01 No, contact for status on SCADA to be added for detection of cable fault - 01 No (j) ON, OFF, EARTH mechanical indication on the front mimic of the panel - 01 No

02 Nos. Outgoing, VCB module, each having (a) 11kV, 630A, 20kA, fixed type Vacuum Circuit Breaker with series disconnector-cum-earthing Switch and Mechanical ON/OFF/EARTH/Spring Charge Indication (b) Manually spring-charged, high-endurance mechanism with spring-charging handle and distinct, mechanically latched ON/OFF push-button suitable for frequent operation. (c) Each module having set of 03nos. Cable terminals with cable bushings situated not beyond 300mm from cable-cover to allow ease of access for installation/testing/replacement purposes, with interlocked door to prevent access of 11KV, 120Sqmm, 3Core, XLPE AL cable termination in live-condition, along with suitable CT-mounting plates, clamping-plate and copper earthing-bar for grounding the cable braid. (d) “Live Cable” LED Indicators thru Capacitor Voltage Dividers mounted on the bushings. (e) Auxiliary contacts of VCB position, 1NO+1NC - 01No. (f) Shunt tripping and closing coils of continuous duty (24VDC) - 01No. Each (g) Flush-Mounted, numerical, aux. powered, 03-OverCurrent+01-EarthFault Feeder Protection Relay of same make as VCB, providing OverCurrent (LowSet: 10%-250% / HighSet: 20%-2500%), Earth-Fault (LowSet: 10%-200%/HighSet: 50%-1250%), Three Phase Inrush Detection, CktBrkr Control, TripCkt Supervision, Three Phase & Residual Current Measurement, Non-Volatile memory for 100-event log, five-fault-record with time-stamp, Local LCD display, user programmable DI/DO and plug-out type CT-connector with auto CT-shorting for operator safety - 01no. (h) Right angle boots (push on type) : Each Set of 03 (j) Breaker ON/OFF/TRIP LED Indication - 01 Set (k) Digital Multifunction Meter with Acc.Cl.1.0 - 01No. (l) Set of 03Nos. Ring Core Protection CTs having ratio 40/1, 2.5VA, 10P10 (m) Set of 03Nos. Ring Core Metering CTs having ratio 50/1, 2.5VA, Cl.1.0 Metering Module - 01No, comprising of (a) Bus-Connected Voltage Transformers having ratio 11kV/rt3:110V/rt3, 25VA, Class 1.0 connected in Star-Star formation, with HRC Fuses for isolation on HT side and MCBs on LT side - Set of 03Nos. (b)Digital Voltmeter for measurement of busbar voltage (Cl.1.0) - 01No. (c) R-Y-B Phase LED Indication - 01 set (d) Anti-condensation space-heater with thermostat (230V AC) - 01No.

Additional items mounted on panel or delivered seperately, (a) Operating Handle for Connection/Disconnection/Earthing of Line - 01No. (b) Integrated Manometer for monitoring gas-pressure connected to main tank with provision of gas-refilling at site. - 01No. (c) 2x12V DC Battery+Charger Scheme with sufficient juice to provide DC power backup to the relays of the entire board for 4-hours and ensure atleast 5 ON/OFF operation of each VCB (230V AC supply to charger shall be ensured by contractor) - 01No. (d) 3-pin sockets and LED Illumination Lamps as required as per manufacturer recommendation and approved by Engineer-in-charge Notes:- (i) Necessay interclocking arrangement shall be provided for safety and operations (ii) Above switchgear shall confirm to relevant IEC (62271-200) for design, manufacturing and internal arc compliance. No claims towards internal arc compliance, number of mechanical/electrical/short-circuit operations, gas-leakage rates etc. shall not be entertained and contractors quoted rates shall be deemed included these provisions. (iii) Cost of Provision of Plinth for RMU shall be deemed included in the unit rate quoted by the contractor.

Supplying, installation, testing & commissioning of 11 KV, 630 Amps, 20kA/3-sec extensible Indoor type SF6 gas insulated 630 Amp Copper busbar Compact Switchgear comprising of 1 no. Load Break Switch + 2no. outgoing VCB arrangement with associated metering module as details below. All LBS/VCB shall be enclosed in a non magnetic, non ferrite IP67 Stainless Steel tank filled with SF6 gas with, leak rate less than 0.1% and tested for internal arc fault of 20kA for 01-second as per latest IEC 62271-200 standard. Each VCB shall be provided with high-endurance mechanisms to achieve more than 2000 close-open operations and mechanically latched push buttons to meet frequent operating requirements. VCB, VI FPI, Relay and RMU should be of same make.The unit shall include the following with all necessary standard fitting required at site:-

01 Nos Load Break Switches module each consisting of following accessories (a) 11kV, 630A Load Break Switch with interlocked line-switch of making capacity, short circuit current - 20kA/3-sec, Making Capacity - 50kAp - 01 No (b) Auxiliary contacts - 1NO + 1NC - 01 No (c)Spring-assisted snap-action manual operating mechanism along with interlocked earthing switch with independent operating access - 01 No (d) Each module having set of 03nos. Cable terminals with cable bushings situated not beyond 300mm from cable-cover to allow ease of access for installation/testing/replacement purposes, with interlocked door to prevent access of upto 11KV, 300 Sqmm, 3 Core , XLPE AL cable termination in live-condition, along with suitable clamping-plate and copper earthing-bar for grounding the cable braid. (e) Right angle boots (push on type) : Each Set of 03 (f) Arc proof cable covers having cable entry from bottom, front with Interlocking mechanism including earth switch - 01 No (g) Capacitive voltage indication fixed type system with LED - 01 Set (h) Fault Passage Indicator - It shall be provided for each incomer load break unit, FPI with LCD display, self reset with 1 No. Contact for status on SCADA to be added for detection of cable fault - 01 No (j) ON, OFF, EARTH mechanical indication on the front mimic of the panel - 01 No

02Nos. Outgoing, VCB module, each having (a) 11kV, 630A, 20kA, fixed type Vacuum Circuit Breaker with series disconnector-cum-earthing Switch and Mechanical ON/OFF/EARTH/Spring Charge Indication (b) Manually spring-charged, high-endurance mechanism with spring-charging handle and distinct, mechanically latched ON/OFF push-button suitable for frequent operation. (c)Each module having set of 03nos. Cable terminals with cable bushings situated not beyond 300mm from cable-cover to allow ease of access for installation/testing/replacement purposes, with interlocked door to prevent access of 11KV, 120Sqmm, 3Core, XLPE AL cable termination in live-condition, along with suitable CT-mounting plates, clamping-plate and copper earthing-bar for grounding the cable braid. (d) “Live Cable” LED Indicators thru Capacitor Voltage Dividers mounted on the bushings. (e) Auxiliary contacts of VCB position, 1NO+1NC - 01No. (f) Shunt tripping and closing coils of continuous duty (24VDC) - 01No. Each (g) Flush-Mounted, numerical, aux. powered, 03-OverCurrent+01-EarthFault Feeder Protection Relay of same make as VCB, providing OverCurrent (LowSet: 10%-250% / HighSet: 20%-2500%), Earth-Fault (LowSet: 10%-200%/HighSet: 50%-1250%), Three Phase Inrush Detection, TripCkt Supervision, Three Phase & Residual Current Measurement, Non-Volatile memory for 100-event log, five-fault-record with time-stamp, Local LCD display, user programmable DI/DO and plug-out type CT-connector with auto CT-shorting for operator safety - 01No. (h) Right angle boots (push on type) : Each Set of 03 (j) Breaker ON/OFF/TRIP LED Indication - 01 set (k) Digital Multifunction Meter with Acc.Cl.1.0 - 01No. (l) Set of 03 Nos. Ring Core Protection CTs having ratio 40/1, 2.5VA, 10P10 (m) Set of 03 Nos. Ring Core Metering CTs having ratio 50/1, 2.5VA, Cl.1.0

Metering Module - 01No, comprising of (a) Bus-Connected Voltage Transformers having ratio 11kV/rt3:110V/rt3, 25VA, Class 1.0 connected in Star-Star formation, with HRC Fuses for isolation on HT side and MCBs on LT side - Set of 03 Nos. (b)Digital Voltmeter for measurement of busbar voltage (Cl.1.0) - 01 No. (c) R-Y-B Phase LED Indication - 01 set (d) Anti-condensation space-heater with thermostat (230VAC) - 01 No. Additional items mounted on panel or delivered seperately, (a) Operating Handle for Connection/Disconnection/Earthing of Line - 01 No. (b) Integrated Manometer for monitoring gas-pressure connected to main tank with provision of gas-refilling at site. - 01 No. (c) 2x12V DC Battery+Charger Scheme with sufficient juice to provide DC power backup to the relays of the entire board for 4-hours and ensure atleast 5 ON/OFF operation of each VCB (230V AC supply to charger shall be ensured by contractor) - 01 No. (d)3-pin sockets and LED Illumination Lamps as required per manufacturer recommendation and approved by Engineer-in-charge Notes:- (i) Necessay interclocking arrangement shall be provided for safety and operations (ii) Above switchgear shall confirm to relevant IEC (62271-200) for design, manufacturing and internal arc compliance. No claims towards internal arc compliance, number of mechanical/electrical/short-circuit operations, gas-leakage rates etc. shall not be entertained and contractors quoted rates shall be deemed included these provisions. (iii) Cost of Provision of Plinth for RMU shall be deemed included in the unit rate quoted by the contractor.

Supply, installation, testing & commissioning of 11 KV, 630 Amps, 20kA/3-sec Outdoor type SF6 gas insulated 630 Amp Copper busbar Compact Switchgear comprising of direct incoming module and LBS as outgoing as details below. All LBS/VCB shall be enclosed in a non magnetic, non ferrite IP67 Stainless Steel tank filled with SF6 gas with, leak rate less than 0.1% and tested for internal arc fault of 20kA for 01-second as per latest IEC 62271-200 standard. Each VCB shall be provided with high-endurance mechanisms to achieve more than 2000 close-open operations and mechanically latched push buttons to meet frequent operating requirements. VCB, VI FPI Relay and RMU should be of same make.The unit shall include the following with all necessary standard fitting required at site:-

01 Nos Load Break Switches module each consisting of following accessories as incoming/Outgoing (a) 11kV, 630A Load Break Switch with interlocked line-switch of making capacity, short circuit current - 20kA/3-sec, Making Capacity - 50kAp - 01 No (b) Auxiliary contacts - 1NO + 1NC - 01 No (c)Spring-assisted snap-action manual operating mechanism along with interlocked earthing switch with independent operating access - 01 No (d) Each module having set of 03nos. Cable terminals with site-replacable cable bushings situated not beyond 300mm from cable-cover to allow ease of access for installation/testing/replacement purposes, with interlocked door to prevent access of upto 11KV, 300 Sqmm, 3 Core , XLPE AL cable termination in live-condition, along with suitable clamping-plate and copper earthing-bar for grounding the cable braid. (e) Right angle boots (push on type) : Each Set of 03 (f) Arc proof cable covers having cable entry from bottom, front with Interlocking mechanism including earth switch - 01 No (g) Capacitive voltage indication fixed type system with LED - 01 Set (h) Fault Passage Indicator - It shall be provided for each incomer load break unit, FPI with LCD display self reset with 1 No contact for status on SCADA to be added for detection of cable fault - 01 No (j) ON, OFF, EARTH mechanical indication on the front mimic of the panel - 01 No

Notes:- (i) It shall be preferable to have upto 05nos. feeders inside single stainless steel compartment to prevent chances of failure due to plug-in coupling arrangement. (ii) Necessay interclocking arrangement shall be provided for safety and operations (iii) Above switchgear shall confirm to relevant IEC (62271-200) for design, manufacturing and internal arc compliance. No claims towards internal arc compliance, number of mechanical/electrical/short-circuit operations, gas-leakage rates etc. shall not be entertained and contractors quoted rates shall be deemed included these provisions. (iv) Cost of Provision of Plinth for RMU shall be deemed included in the unit rate quoted by the contractor.

DG SET Supplying, installation, testing & commissioning of factory assembled Diesel Engine driven generating set fully wired alternator AC to give an output of 40 KVA continuously rating at a PF of 0.8 lagging, 415 volts , AC 3 phase 4 wire 50 HZ ,1500 RPM, directly coupled with diesel engine air cooled mounted on common base frame complete with floor mounting fuel tank (service tank) of adequate capacity with fuel line & accessories, PCC foundation work as per manufacturer's instructions, vibration damper pads & other accessories etc. complete all as specified including the following accessories:- Note:- Quoated rate deemed to inclusive of excavation, removing of any type of soil and Cement Concrete foundation, filling and mass concrete type B2 (1:2:4) using 40 mm graded aggregate of size not less than as per OEM drawing for placing of DG Set.

(a) Diesel engine : Diesel engine rated at 1500 rpm, Air Cooled, Four Stroke Electeic Start Diesel Engine conforming to IS 3046 with capacity of 10% over loading for one hour in every twelve hours duration having following accessories as scope of supply:- (a) AIR INTAKE SYSTEM: (i) Air intake manifold, (ii) Dry type air cleaner, (iii) Vacuum indicator (b) EXHAUST SYSTEM: (i) Turbo-charged After cooled, (ii) Expansion bellow (iii) Exhaust manifold, (iv) Exhaust silencer (c) COOLING SYSTEM: for air cooled (i) Blower fan, (ii) Exhaust fan (d) LUBRICATING SYSTEM: (i) Lub oil cooler, (ii) Lube oil filter "Spin-on" type, (iii) Centrifugal filter

(e) FUEL SYSTEM: (i) "Spin-on" type fuel filter, (ii) 12 V DC solenoid coil, (iii) Inline fuel injection pump and Fuel Feed Pump, (iv) Governor - Mechanical, (v) Fuel filling arrangement inside the enclosure (f) STARTING SYSTEM: (i) 15-125 KVA 12-Volt Starter *12 Volt DC solenoid coil & 12 Volt DC Battery charging Alternator (g) INSTRUMENT PANEL (i) Start/ Stop Push button, (ii) Lub oil pressure indication, (iii) Water temperature indication (iv) RPM indication, (v) Engine running hour indication, (vi) Low lube oil trip indication (vii) High Engine temperature trip indication, (viii) Low/ High Battery Voltage Indication (ix) Over /Under speed trip Indication, (x) Low fuel level Indication, (xi) Over Load trip indication (h) SAFETY CONTROLS (i) Low lube oil pressure trip, (ii) High Engine temp trip, (iii) Low Fuel Level Trip, (iv) Over load trip, (v) Over/ Under Speed Trip (j) OTHERS (i) AVM pad, (ii) Engine suitable for closed couple alternator, (iii) Front and rear engine-mounting supports (B) ALTERNATOR: Synchronous alternator suitable for continuous operation at 1500 RPM generating 415 volts 0.8 p.f. (lag) suitble for 50 Hz, three phase, 4 wire system. The alternator shall be brushless, single excited & self excited & self regulated with an AVR. The alternator will be suitable for tropical climate and shall gernerally confirm to IS: 4722. The salient features of the alternators are. (i) +1% voltge regulation (max) in static conditions, (ii) IP: 23 protections with class 'H' insulation. (iii) Permanent lubricating bearing, (iv) Permissible overload of 10% for one hour in 12 hour of operation

(C) CONTROL PANEL: The standard control panel is fabricated from 16/14 SWG sheet and powder coated after seven tank treatment process. The panel is equipped with:- (i) Digital Genset Control Unit, Digital Control unit is special designed to standardize most of control panels componets in single unit. (ii) The Control Panel is equipped with MCB /MCCB of suitable rating and CT along with bus bars & cables. (D) SET OF BUTTONS: Canopy Lamp ON/OFF (E) ACOUSTIC ENCLOSURE: KOEL GREEN Acoustic enclosure shall be powder coated and fabricated out of 16 SWG CRCA MS sheet. The silent canopy shall be of nut bolt type construction. Critical processes of punching is done on CNC machines to maintain dimensional accuracy of holes within 0.1 mm. Powder coating is done after seven-tank surface preparation process of sheet metal.Canopy panel and doors shall have inside lining of FIRE-RETARDANT foam as acoustic material & Rock wool for hot zone. Adequate hinged doors shall be provided to canopy, one door shall have glass window for control panel visibility. (F) BASE FRAME: Base frame is fabricated either in ISMC channel or in sheet metal. The base frame will be primer coated and painted. The base frame is ruggend in construction and designed for mounting KOEL engine and KG alternator close coupled, with cross members mounted on AVM. The base frame shall have provision for mounting of acoutic enclosure & control panel on it. The base frame is having provision of lifting hook for convenient lifting of complete set, i.e. along with canopy, engine and alternator. (G) FUEL TANK: Daily service fuel tank of 8 hours of continuous operation, fabricated from 14/16 SWG sheet metal complete with drain, inlet and outlet connection and fuel gauge. (H) BATTERIES: 1 No. , battery of 12 V, 180 AH capacities in charged condition with its leads.

M & L for Earthing complete with copper earth plate electrode 60 cm x 60 cm x 3 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to copper strip earth 20 x 3 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of protection pipe galvanized iron 40 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete as detailed below and all as directed.

NOTE FOR ITEM NO. 49.00 Rate quoted by tenderers shall be deemed to include for following provisions:- (i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC M25 design mix using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 5 of MES SSR Part-I. (ii) Item includes the cost of 7.5 M GI pipe for protection of earth wire. Any variation in length shall be adjusted through deviation order. (iii) Item includes cost of 7.5 M earth copper earth strip 20 x 3mm. Any variation in length shall be adjusted through deviation order. (iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc.

M K ENGINEERS CO.

FRIZO INDIA PVT LTD

Leo Network power systems

SOOD ASSOCIATES PVT LTD