Maintainance/repair of high mast lights, street lights, street light feeders and street light panels at YOL CANTT

Amount

Taking down the old Unserviceable and high energy consuming existing HPSV/MH/4x14W Street Light fittings of any make or any capacity from the pole after disconnecting the electric connection carefully complete all as directed.

S&F energy Efficient 35W LED Street Light fixtures with sufficient number of LEDs, control gear and all other associated accessories and colour temperature more than 6500 ºK and conforming to protection IP - 66 and Driver compartment should be separate and its maintenance from TOP and driver should be isolated, the system luminous efficacy > 100Lumens /Watt, PF >0.95, THD <10 % and CCT 5700 K with a variation of +/- of 300 K and CRI >70. Inbuilt surge protection of 4 KV should be provided and with external SPD 10kV. The operating voltage of the Luminaire should be from 90V to 300 V with under voltage and over voltage protection. The Driver must be with phase to phase protection 400V up to 8 hours. Driver efficiency should be > 85 % and suitable for pipe dia Ø 35/40 mm on existing poles complete all as specified and directed. complete all as specified and directed Engr-in-Charge.

S&F energy Efficient 60W LED Street Light fixtures with sufficient number of LEDs, control gear and all other associated accessories and colour temperature more than 6500 ºK and conforming to protection IP - 66 and Driver compartment should be separate and its maintenance from TOP and driver should be isolated, the system luminous efficacy > 100Lumens /Watt, PF >0.95, THD <10 % and CCT 5700 K with a variation of +/- of 300 K and CRI >70. Inbuilt surge protection of 4 KV should be provided and with external SPD 10kV. The operating voltage of the Luminaire should be from 90V to 300 V with under voltage and over voltage protection. The Driver must be with phase to phase protection 400V up to 8 hours. Driver efficiency should be > 85 % and suitable for pipe dia Ø 35/40 mm on existing poles complete all as specified and directed. complete all as specified and directed Engr-in-Charge.

S&F energy Efficient 100W LED Street Light fixtures with sufficient number of LEDs, control gear and all other associated accessories and colour temperature more than 6500 ºK and conforming to protection IP - 66 and Driver compartment should be separate and its maintenance from TOP and driver should be isolated, the system luminous efficacy > 100Lumens /Watt, PF >0.95, THD <10 % and CCT 5700 K with a variation of +/- of 300 K and CRI >70. Inbuilt surge protection of 4 KV should be provided and with external SPD 10kV. The operating voltage of the Luminaire should be from 90V to 300 V with under voltage and over voltage protection. The Driver must be with phase to phase protection 400V up to 8 hours. Driver efficiency should be > 85 % and suitable for pipe dia Ø 35/40 mm on existing poles complete all as specified and directed. complete all as specified and directed Engr-in-Charge.

S&F LED flood light fitting 100W with sufficient number of LEDs, control gear and all other associated accessories and colour temperature more than 6500 ºK and conforming to the degree of protection IP - 66 with with over load production and SPD surge level +(or) - 10KV complete all as specified and directed.

S&F LED flood light fitting 210W with sufficient number of LEDs, control gear and all other associated accessories and colour temperature more than 6500 ºK and conforming to the degree of protection IP - 66 with over load production and SPD surge level +(or) - 10KV complete all as specified and directed.

Taking down of existing UNSV post top lantern fitting of any type and any description, supply and fix LED post top lantern fitting 20W made in die cast aluminium spigot housing with decorative clear opal diffuser and IP65 protection complete incl fixing arrangement on pole and PCC (1:2:4) and necessary connection complete all as specified and directed.

M&L for square shaped integral decorative LED bollard with polycarbonate diffuser and IP65 protection 8W including necessary connection with suitable size of copper cable complete all as specified and as directred.

Supply and fix 9watt LED Lamp for garden light all as per code no. LED ADORE 9 W B22 WW 3 STAR LAMP LHLDEUEEMC8R009, of Make Havells or equivalent model of make PHILLIPS /Polycab/ Bajaj / HPL

M&L for Decorative gate light made up of high grade unbreakable polycarbonate diffuser and IP65 protection material suitable for retrofit 9 W including necessary connection with suitable size of copper cable complete all as specified and as directred.

Supply & replacement driver/electronic control gear suitable for 45W LED street light fitting of THD less than 10%input Voltage 145-270VAC output Voltage 40-60 VDC 750MA and overload protection & short circuit protection complete all as specified and directed.

Supply & replacement driver/electronic control gear suitable for 60 W LED street light fitting of THD less than 10%input Voltage 145-270VAC output Voltage 40-60 VDC 750MA and overload protection & short circuit protection \ complete all as specified and directed.

Supply & replacement driver/electronic control gear suitable for 90 W LED street light fitting of THD less than 10%input Voltage 145-270VAC output Voltage 90-125 VDC 750MA and overload protection & short circuit protection complete all as specified and directed.

Supply & replacement driver/electronic control gear suitable for 120 W LED street light fitting of THD less than 10%input Voltage 145-270VAC output Voltage 120-150 VDC 1000MA and overload protection & short circuit protection complete all as specified and directed.

S&F MCCB TPN 63 Amps 4 Pole, 16 KA, 415 Volts, AC, 50 Hz all as specified and directed.

Supply and fix Volt meter for complete in all respect all as specified and directed.

Supply and fix Indication lamp for Three colour complete in all respect all as specified and directed.

Supply & fix three pole power contactor, 415 Volts, ML-4, Conforms to IS/IEC 60947-4-1 & IEC 60947-4-1, Rating 70A for AC-3 & 100A for AC-1, l Robust and suitable for hostile applications for street light control including electric connection complete all as specified & directed including taking down old one.

Supply & fix street light timer Timer FM1 / Quartz Daily 240V AC Base/DIN Mounting analogue type suitable for street light control complete all as specified & directed including taking down old one.

Supply and fix in Repair pole junction box sheet moulded compounded (SMC) type with hinged door and locking arrangement of size 200x140x95mm internal comprising one No SP MCB 6 Amps capactiy and one No bakelite based buetral link one No earthing terminal and Four Nos aluminium bus bar of suitable capacity including nuts, bolts, MS clamp etc. complete.

S&F copper conductor cable PVC insulated single core 1.5 Sqmm (two run for Phase & Neutral) and single run 1.5 Sqmm copper conductor cable for earth wire (Green Colour) through and incl PVC conduit 20mm dia as per site requirment from junction box to street light, complete all as specified and directed. Note:- One run of phase, neutral & earth wire will be measured as one length.

Material and labour for servicing of high mast light including of oiling greasing of wire rope and driving motor and replacement complete unsv wiring from connector to high mast light with twin core copper 6sqmm wire including of taking down old unsv connector complete all as specified and directed.

M&L for fabrication of street light bracket made out of GI pipe 40mm dia medium grade GI Pipe minimum 1.5 Mtr long including fixing with 02 Nos MS clamps made out of flat iron of size 30mm x5 mm with nut bolts and washer incl painting work complete all as specified and directed Including taking down old one.

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 16 Sqmm 4 core laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc including testing after laying, including taking out old cable, complete all as specified.

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 10 Sqmm 2 core laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc including testing after laying, including taking out old cable, complete all as specified.

1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular stranded conductor size of 16 sqmm, including taking down old wire complete all as specified.

Excavation in trenches n.exc 1.5 metres wide and n.exc 1.5 metres deep and getting out in any type of soil, all as specified.

Returning filling in including spreading leveling, watering and well ramming in layers n. exc 25cm, all as specified.

Removal of excavated material to be distance n.exc 50M and depositing where directed at a level n.exc 1.5m high from the starting point, all as specified.

Sand cushioning to under ground cables, 8 cm thick layer before laying and testing the cable and 15 cm thick after laying and directed by Engr-in-Charge.

Supply and laying Sub class ‘B’ bricks for covering to cable protection with width equal to the length of bricks complete all as specified and as directed.

Laying of old bricks in trenche as cable protection with width equal to the length of bricks complete all as specified and as directed.

Eshaan Construction Co.

ess are electricals and electronic

M/S PUSHPINDER ENGINEERS

ASHOK KUMAR JAIN