SPECIAL REPAIR TO ROOF AND FALSE CEILING OF BLDG NO NP 62 OF 11 INF DIV DEF AND EMP COY AND SPECIAL REPAIR TO BLDG NO NP 69 (HQ COY OR MESS) OF 11 INF DIV SIG REGT (AREN) AT AHMEDABAD UNDER GE (A) AHMEDABAD

Amount

Dismantling timber scantling 40 Sqcm and over in section in any position in unframed work as in rafters, purlins etc complete all as specified and directed by Engr-in-Charge.

Dismantling timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section unframed complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise spefifically provided for complete all as specified and directed by Engr-in-Charge.

Dismantling asbestos cement (corrugated or semi corrugate, etc.,) sheets in roof covering complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.60mm thick of colour as directed by GE having tensile strength of 550MPa as in roof covering/cladding to wall, with necessary rubber/PVC end cappings/closure at support fixed with self tapping screws complete all as specified and directed (Note: Corrugation shape of sheet shall be approved by GE)

S&F prepainted galvalume aluminium zinc coating GI base plain sheeting steel sheet 0.60mm thick of colour as directed by GE for ridge having tensile strength of 550MPa as as in roof covering/cladding to wall, with necessary rubber/PVC end cappings/closure at support fixed with self tapping screws fixed with self tapping screws complete all as specified and directed.

S&F 0.56mm thick plain aluminium sheeting, Alloy 31000H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm cross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off white/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board (Everest) 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction. (Make : METROC or METACIL or any other equivalent as approved by GE)

Supply & fix rolled mild steel in joist, angle ,channel as in purlins, rafters cleats etc conforming to Fe-410- W (Gde-E-250)quality A complete all as specified and directed.

S & F for hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of wall primer over 2mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of exterior emulsion paint on over one coat of exterior wall primer on on old plastered or unplastered surface on walls all as specified and directed by the Engr-in-Charge

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L PCC 1:2:4 type B0 using 12.5 mm graded aggregate as in hold fast, cill etc with necessarry form work complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F PVC(SWR) 110mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall complete all as specified and directed.

M&L for preparing the existing surface by cleaning thoroughly to make it smooth and free from any foreign matter such as fungus, moss, dust etc by wire brushing and dusting and applying a coat of bituminious primer conforming to IS : 3384 - 1986 @ 0.30 litre / Sqm and then pressing & laying 3mm thick Atactic Polypropylene Polymer (APP) modified prefabricated with non woven polyester reinforcement five layer water proofing membrane weighing not less than 3.60 Kg/ Sqm comprising of centre core of 160 - 170gsm non - woven polyster matt sandwitched on both sides by APP polymer modified bitumen duly protected on both sides by 20 micron HMHDPE film by torch on application with gas welding torch (Butane torch), and thereover applying a tack coat of 85/25 blown grade bitumen conforming to IS : 702 @ 1.20 Kg / Sqm and finish the top surfaces with aluminium paint (Super Silver Shield) @ 0.150 Ltr / Sqm complete all as specified. as per manufacturer's instructions and as directed. Note :- The WPT work shall be got done through manufacturer's authorised applicator only under strict supervision of manufacturer's technical representative.

M&L TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete all as specified and directed.

All as per item No 20 above but 6mm to 8mm dia complete all as specified and directed.

M&L TMT bars 6 mm dia & over upto & including 10 mm dia in stirrups, spacers & binders etc complete all as specified and directed.

M&L for RCC Type A1 (1:1½:3) using 20 mm graded aggregate for Columns, pillars, piers, posts & struts etc complete all as specified and directed.

M&L for RCC Type A1 (1:1½:3) using 20 mm graded aggregate for Beams, cantilevers, bresummers, lintels over 1.5 m span etc complete all as specified and directed.

M&L for RCC Type A1 (1:1½:3) using 20 mm graded aggregate as in Chajjas complete all as specified and directed.

M&L for RCC Type A1 (1:1½:3) using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L, Flat Form work to sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams: and similar work; vertical or to batter complete all as specified and directed.

M&L,Formwork to rough finish surface of flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)complete all as specified and directed.

M&L, Form work to sides of pillars posts, struts, piers, columns & stanchions square rectangular or polygonal fair finished surfaces in shape complete all as specified and directed.

M&L, Flat Form work to sides and soffits of floors or roof beams, beam haunchings, girderrs, bressum-mers, lintels cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc complete all as specified and directed.

M&L Form work to chajjas, trough and similar items including edges complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) with water proofing compound including finishing the surface even and smooth without using extra cement ( Integral water proofing compound shall be measured and paid separately)

Supplying only integral waterproofing compound all as specified & as directed by Engineer-in-Charge

Taking down cement or lime plaster of any description from stone or brick walls etc., including racking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified and directed

M&L, Rendering 10 mm thick on fair faces of brick or concrete surfaces with CM 1:4 on ceilling finished even and smooth complete all as specified and directed by Engineer-in-Charge

M&L for Providing and fixing 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately)

All as item No. 36 above but including any sunk or raised moulding and curved edges, etc in ornamental intricate design complete all as specified and directed.

M&L Gl frame work for seamless ceiling with size of grid 605 x 605mm comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit/ceiling at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (of any length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L for applying two coats of oil bound distemper on newly plastered surfaces of wall over a coat of approved wall care Putty 2mm thick and preparation of wall surfaces complete all as specified and directed.

M&L, applying 2 coats of oil bound distemper over a coat of primer on ceilling with preparing new plastered surfacescomplete all as specified and directed. by Engineer-in-Charge

M&L, applying 2 coats cement paint over a coat of primer on wall & ceilling with preparing new plastered surfaces complete all as specified and directed. by Engineer-in-Charge

Taking down chowkats or frame with shutters (without taking off shutters from the frame) n exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) and refixing in same opening n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) and refixing in same opening exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling and Refixing of mild rolled steel straps in joist, angle ,channel as in purlins, rafters cleats , ceiling frame etc conforming to fe410 w complete all as specified and directed.

Material & labour for 6mm thick AC plain building boards fixed to mild steel frame as in ceiling complete all as specified and directed.

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed.

M&L Burnt Brickwork with sub class ‘B’ bricks old size, straight or curved on plan to any radius in half brick thick walls built in Cement mortar (1:4) complete all as specified and directed.

M&L pre-cast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in shelves, cooking platform, landing cover slabs (for manholes etc) & similar articles set in CM 1:4 complete all as specified & directed (reinforcement shall be measured & paid separately).

M&L for reinforced cement concrete type B1, 1:2:4 (using 20mm graded aggregatte) as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed.

M&L, Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface etc complete all as specified and directed.

M & Lfor 75 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) including necessary form work as in sub base of flooring, complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded stone agg as in Top surfaces finished even and fair complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles joint free 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 57 above but on Vertical Surfaces incl 10 mm thick backing coat CM 1:4 complete all as specified and directed.

M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick on vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified and directed.

M&L machine cut Kota stone slab 18 to 20 mm thick as in flooring or treads of step incl half round moulding over and including screed bed 15 mm thick in CM (1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified.

M&L machine cut Kota stone slab 18 to 20 mm thick as in riser to step including 10 mm thick rendring in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified.

M&L for grinding and mirror polishing on existing kota stone flooring complete all as specified and directed.

Supply & fix aluminium powder coated framed windows, any pattern sliding Three track , cooler opening using powder coated aluminium sections or approved make, with or without sash bars, suitable for 5 mm thick glazing and Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements, frame of window should be of 1.5 mm thick section & shutter sec like handle/interlocking/top/bottom should be of 1.2 mm thick etc , complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc

M&L for grill medium grade of mesh/opening size 75 to 125mm with 10 to 12mm square MS Guard bars fixed with suitable MS frame complete all as specified and directed.

M&L 35mm thick 2nd class hardwood glazed and skeleton factory made open rebated and prepared to recive glass gauge etc.(without sash bars) edge of framing plain chamfered or rounded fitted with cut and mittered beads for securing glass gauge etc. size of members of shutters as specified in SSR Part-I 2009.Section 8, Clause 8.24 (a)

S&F galvanized mild steel wire cloth 0.43 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staple complete all as specified & directed.

S&F MS butt hinges 100mm long medium weight cold rolled complete all as specified.

S&F aluminium anodized barrel tower bolt 200mm long of extruded section complete all as specified.

S&F 250 mm long aluminim alloy sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cast of extruded section andfixing bolt of extruded section or cast aluminium alloy complete all as specified and directed.

S&F aluminium anodized handle fabricated type 150mm long complete all as specified.

M&L rendering 10mm thick in CM (1:6) on brick work or concrete surfaces of walls finished even & smoth without using extra cement complete all as specified.

M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate 75mm thick as in plinth protection including necessary form work and finishing surface even and smooth w/o using extra cement including bitumen joints complete all as specified.

M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper over chalk whiting and a coat of primer all as specifed.

M&L for complete removal of existing treatment and applying two coats cement based paint on over one coat of primer on on old plastered or unplastered surface on walls all as specified and directed by the Engr-in-Charge

M&L complete removal of existing treatement and applying two coats of oil bound distemper over chalk whiting and a coat of primer, on old plastered or un-plastered surfaces on walls complete all as specified and directed by Engr-in-Charge

M&L applying 3mm thick wall care putty on wall surface finshed the surface even and smooth complete all as specified and directed.

M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for preparation of old surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth & applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surface exc. 10 cm girth or width and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L granite stone 20 mm thick (table rubbed and polished Z black ) in step, jambs,pillers , window cills, cooking plateforms and the like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe etc complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mm x160mm complete all as specified and directed.

Dismantling of water tanks exc 500 & n exc 1000 ltr capacity & removing to store complete all as specified and directed.

S&F in repair rotational moulded PVC water storage tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20mm dia & making connection for inlet and outlet and dismantling complete all as specified & directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm bore complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm bore complete all as specified and directed.

S&F 15mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair 15mm dia Bib taps, cast copper alloy fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm dia stop valves/angle cock, fancy type chromium plated screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550x400mm including waste pipe, brackets and cutting for and pinning in ends of brackets or erecting stand but excluding taps, chain and plug complete all as specified and directed.

S&F in repair pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe, 15mm bore fancy type complete all as specified and directed.

S&F in repair 20mm dia gun metal gate valve with iron wheel headed screwed both end iron pipe and fixed complete all as specified and directed.

S&F in rerpair PTMT square grating with / without waste pipe hole 150mm size for trap in repairs complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nut of length 450 mm complete all as specified and directed.

S&F in repair CI floor trap 75 mm dia of outlet including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR ) pipe in any length fixed to walls and floor with and including rubber ring joint and MS clamps complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR ) bend any radius complete all as specified and directed by Engr-in-Charge.

S&F in repair 25 mm dia fancy type curtain rod fixed to wall complete all as specified and directed by Engr-in-Charge.

S&F fancy type curtain brackets & knob fixed to wall complete all as specified and directed by Engr-in-Charge.

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :-

One light point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete.

S&F switch piano flush button single pole one way 6 amp complete.

S&F switch piano flush button single pole one way 16 amp complete.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete.

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity including connecting up complete.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:-

2x4 sqmm + 1x4 sqmm earth continuity conductor in 20 mm dia conduit..

2x6 sqmm + 1x4 sqmm earth continuity conductor in 20 mm dia conduit..

S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make : Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " or Havells Lumiline plus / Wipro / GE lighting as approved.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Wipro or GE lighting or Havells as approved.

M&L for pipe in pipe chemical earthing with GI pipe electrode 3.0 m long having outer pipe nominal dia 80 mm & inner pipe nominal dia 50 mm duly filled with highly conductive and anti corrosive compound of required quantity having chemical composition Bentonite 40%, copper sulphate 20%, Gypsom 5%, Graphite 10%, Alum 5%, Zinc sulphate 10%, Aluminium sulphate 10% burried in ground by digging a bore of 150 mm dia surrounded by soil friendly backfill compound non soluble in water including connection with galvanised earth wire 4 mm dia from pit to main MCB DB protected in 15 mm GI pipe light grade, making PCC pit of size 0.3 m x 0.3 m x 0.3 m (inner size) in mix 1:3:6 type C1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 8 mm dia MS bars 3 Nos both ways with lifting hook made out of 8 mm dia bar and testing on completion to achieve value not more than 1.0 ohm complete.

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCB distribution board ETPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 16 amp. Make - Legrand DX3 cat ref no. 408587 to 408592 or equivalent in Schneider or Hager as approved.

Double pole 32 amp. Make - Legrand DX3 cat ref no. 408636 or equivalent in Schneider or Hager as approved.

Four pole 63 amp. Make-Legrand cat ref no. 408702 or equivalent in Schneider or Hager as approved.

Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

Supply & fix exhaust fans AC single Phase 230/240 V of size 300 mm sweep with louver, metal body. Make:- Khaitan / CG / Almonard / Havells.

Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and keeping in safe castody for repair.

Hanging only ceiling fan and connecting up including provision of cable ceiling rose or connector to fans as directed.

S&F wall mounted fan with powder coated guards and blades of approved colour, AC single phase, 230 volts, 50Hz, 1440 rpm, 400mm sweep with adjustable verticle angles & three speed controls mounted within reach of hands with necessary connecting cables recommended/ provided by manufacturer complete. Make: Havells/ Almonard/ Bajaj/ Khaitan as approved.

RISING ELECTRICALS

SG ENGINEERING CO