Construction of Panchayat Community Centre Building for Gram Panchayat Badghwar Dev. Block Bhawarna Distt. Kangra (HP).

Amount

Stone filling tightly dry hand packed under flooring including ramming and consolidation complete as per the direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax , sales tax or other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels, sides, and soffits of beams haunchings, cantilevers, bressumers and lintels upto all depths in all floor. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls up to any width. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level in Cement Mortar 1:6(1 cement:6 sand).The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work M-20 design mix to obtain the minimum compresive strength 20N/mm2 (20 newton per square millimeter) and minimum cement content not less than 320 kg/cubic meter and curing complete and mechanically mixed and vibrated as per approved specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landing and shelves and their supports balconies, beams, girder, bressumers and cantiliver upto any floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work M-25 design mix to obtain the minimum compresive strength 25N/mm2 (25 newton per square millimeter) and minimum cement content not less than 400 kg/cubic meter and curing complete and mechanically mixed and vibrated as per approved specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in stair case (except spiral stair case) including preparing of the surface and finishing of nosing upto any floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying tor steel of TISCO, SAIL reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all respects as per approved drawing, design, and specification in all floor levels including the cost of binding wire and cost of dewatering if arrisen during placement of reinforcement as per PWD specification and approved, drawing design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing 2nd class Deodar wood work in frames of doors , windows , clearstory, windows and other frames wrought , framed and fixed in position complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mm X6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements,toppers,handles,including applying a priming coat of red lead paint complete as per PWD specification . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 200x10mm (Two hundred into ten millimeter) size coloured / anodized aluminum tower bolt, anodized transparent or dyed to required colour and shade with bolts and nuts, screws etcetra complete. The rate is inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 100mm (One hundred millimetre) bright finished brass floor door stopper with rubber cushion screws etcetra to suit shutter thickness complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 10mm (Ten millimeters) thick antiskid water proof stain and impact resistant heavy duty vitrified tiles Nitco/Kajaria/cera or its equivalent double charged 600x600x10mm (Six hundred into six hundred into ten millimeters) manufactured of approved shade and colour in flooring, tread of steps and landings laid over 12mm (Twelve millimeters) thick cement mortar 1:3 (One cement : Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Providing and laying 300x450 and 600x600mm( three hundred into four hundred fifty millimeter) and( six hundred into six hundred millimeter) acid resistance vetrified tiles of Restile/ Nitco/ Rak/ Simpolo/ Kajaria/ Johnson as per approved shade and design as per drawing and specification in flooring, skirting and dado laid over 12 mm ( twelve millimeters) thick cement mortar 1:3 (one cement: three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as reuired complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying 25 mm (Twenty five millimetre) thick Kota stone slab flooring 55x55cm/55x27.5cm (Fifity five into fifty five centimetre)/ (Fifty Five into Twenty seven point five centimetre) with 7.5 cm (Seven point five centimetre) vide jaisalmer yellow band of uniform colour on 20mm ( Twenty millimetre) thick base in cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, noshing, moulding and polishing complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying Kota stone slab 25 mm thick in risers of steps,skirting dado and pillars laid on 12 mm (twelve millimetre) (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing as per approved specification, drawing and design and entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 0.62mm (zero decimal six two millimetre) thick prepainted steel sheet (IS marked Z-120) of TATA durashine/ sail/ Jindal over steel trussed in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (six millimetre) diametres with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing pre-painted steel sheet ridge or hips of TATA Durashine/ Sail 0.62mm (zero decimal six two millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regulat modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers complete in all respect as per approved drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing M.S. B.P. sheet 2 mm (two millimetre) of TATA/ Reliance/ Jindal thick eaves board/Facia/Soffit/Ceiling including cutting, fixing and gass/electric welding steel roof member and applying a coat of red lead primer complete as per PWD specification (frame work is to be measured and paid for separately). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Steel work welded in built up sections trusses and frame work including cutting hoisting and fixing in position and applying a primer coat of red lead paint in beams joints, channels angles tees flats with connections plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing on wall face PVC (D-plast) rain water pipes of working pressure not less than 4.00/6.00 kg (four to six kilogram) per centimetre square including filling the joints with approved adhesive complete 110 mm (one hundred ten milimeter) dia as per ISI marked pipe. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes of Finolex/Supreme/ Prince including filling the joints with approved adhesive complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

110mm (one hundred ten millimetre) dia PVC plain bend

110mm (one hundred ten millimetre) dia PVC shoe

Providing and fixing 110 mm ( One hundred ten millimetre) diametre PVC Clamps ISI Marked of approved design with steel screws and rawal plug etcetra complete within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimetre) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth, in rough side with cement mortar 1:5 (one cement isto five sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimeter) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for exterior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth, with cement mortar 1:6 (one cement isto six sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

6mm (six millimeter) cement plaster 1:4 (one cement isto four sand) in ceiling complete including curing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Finishing wall with Apex weather proof exterior emulsion of Asian paint/ Nerolak Suraksha paint/ Berger paint/Dulux paint of approved brand and manufacture and of required shade on undecorated wall surfaces (Two or more coats) to give an even shade after thoroughly brushing the surface to remove all dirt, dust and remains of loose powdered material including cost and carriage of material with in all leads, lifts and other incidentals as per specificatins, approved drawing as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Wall painting (two coats) with Interior emulsion washable paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings & other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer as PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Painting two coats (excluding priming coats) on new steel and other metal surfaces with enamel paint brushing to give and even shade including cleaning the surfaces of all dirt dust and other foreign matter enamel paint other than white including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint brushing to give an any shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing plinth protection 50mm (Fifty millimetre) thick with cement concrete 1:3:6 (One cement isto Three sand: Six graded stone aggregate 20mm (Twenty milimetre)nominal size including finishing the top surface of concrete smooth per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government..

Providing and laying plain cement concrete work M20 (M twenty) with cement contents not less than 320 kg (three hundred and twenty kilogramme) per cubic metre mechanically mixed and vibrated and curing complete as per PWD specification, drawing excluding cost of form work in foundation and plinth including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing G.I./M.I. union ncluding carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

15 mm (Fifteen millimetre) nominal bore

20 mm (Twenty millimetre) nominal bore

Providing and fixing G.I. socket ncluding carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

15 mm (Fifteen millimetre) nominal bore

20 mm (Twenty millimetre) nominal bore

Providing and fixing G.I. elbow ncluding carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

15 mm (Fifteen millimetre) nominal bore

20 mm (Twenty millimetre) nominal bore

Providing and fixing PVC door tee ncluding carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

15 mm (Fifteen millimetre) nominal bore

20 mm (Twenty millimetre) nominal bore

Providing and fixing PVC nipples ncluding carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

15 mm (Fifteen millimetre) nominal bore

20 mm (Twenty millimetre) nominal bore

Providing and fixing PVC socket ncluding carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

15 mm (Fifteen millimetre) nominal bore

20 mm (Twenty millimetre) nominal bore

Providing and fixing composit end seal compression fitting as per IS-15450-2004 for water supply including Tee, Albows, reducers/ connectors copluers and clamps with jointing testing and fitting complete including cutting and making good the walls etcetra complete including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Equal Tee (1620)

Elbow (1620x15mm)

Female branch tee (1216x1216x15mm)

Male thread connector (1620x15 mm)

Reducing Tee

Coupler (1620)

Reducer (1620x1216)

Providing and fixing 110 mm ( One hundred ten millimeters) high pressure PVC spigot and socket soil, waste and ventilating pipes ISI Marked including fixing with approved adhesive etc. Complete of Finolex/Vectus/red pipe within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 75mm ( Seventy five millimeters) high pressure PVC spigot and socket soil, waste and ventilating pipes ISI Marked including fixing with approved adhesive etc. Complete of Finolex/Vectus/red pipe within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing PVC Clamps ISI Marked of approved design with steel screws and rawal plug etcetra complete within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

75 mm ( Seventy five millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

Providing and fixing PVC heal rest ISI Marked of approved design with steel screws and rawal plug etcetra complete within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

75 mm ( Seventy five millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

Providing and fixing PVC Plain bend ISI Marked of approved design with steel screws and rawal plug etcetra complete within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

75 mm ( Seventy five millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

Providing and fixing PVC Collar ISI Marked of approved design with steel screws and rawal plug etcetra complete within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

75 mm ( Seventy five millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

Providing and fixing PVC Cowl ISI Marked of approved design with steel screws and rawal plug etcetra complete within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

75 mm ( Seventy five millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

Providing and fixing PVC Floor Trap size 110x75 mm ( one hundred ten into seventy five millimeters) ISI marked self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floor complete.within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china European type W.C. of star sr. No 20087 (S-50) of size 57x35x39 cm (fifty seven into thirty five into thirty nine centimeter) wash down water closet hindware/jaguar/cera of star white/ snow white including jet pressure integral P or S trap including jointing the trap with soil pipe in fixture ( seat cover/ jet pressure to be paid sepertely) including entire carriage of materials within all leads and lifts as per direction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 10.00 (Ten) litres capacity P.V.C low level dual flushing cistern (Sleek plus) of Cera/Hindware/Jaguar/ Hindustan with a pair of G.I.or mild steel brackets complete with fittings such as including PVC syphonic appratus, mosquito proof lid of PVC union and coupling for connection with intet, outlet and over flow pipe including cutting holes and making good the same and connection the flush baard with cistern and closet (over flow pipe to be measured and paid for separately) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china under counter wash basin Delta No 10010 and size 55x40 cm ( fifty five into forty centimetre) without pedestial of Hindware/Cera/Jaguar star white/ snow white shade with double hole for pillar trap with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same with all fitting as per specifications, approved drawing including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing PVC connection pipe brass union 450 mm length 15mm dia ISI marked of including fitting within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two millimetre) nominal size diameter rubber plug for wash basin, sink including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two millimetre) nominal size diameters M.I. union ISI marked including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing PVC Waste pipe for wash basin or sink including brass check net with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 100mm (One hundred milimetres) nominal size diameters CP grating of ESS/JAL/Kingston for nalhni trap of approved shade complete, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 600mmx450mm (six hundred millimetre into four hundred fifty millimetre) beveled edge mirror of superior glass 6mm (six millimetre) thick of Modiguard/ Atul/ Golden Fish mounted on 6mm (six millimetre) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. screws and washers including entire carriage of material within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. brass towel rail size 750x20mm (Seven hundred fifty into twenty millimetre) of continental series of Jaguar/Classic of Hindware/ floral series of Cera/Hindon series of Jal with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing as per as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing chromium plated brass soap dish of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindon series of Jal/ ESS with C.P. brass brackets fixed with cleats C.P. brass screws including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. (Chromium Plated) jet sprey of continental series/clasic series/floral series of Jaguar/ Hindware/ Cera for Europen seat of approved quality and colour with 1.5m (One decimal five metre) tube including carriage of material within all leads, lifts and other incidentals as per specifcations, approved drawing as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15mm (Fifteen milimetre) diameters C.P. brass bib tap of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindon series of Jal as per specifications including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing cancealed C.P. brass stop cock of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindon series of Jal (heavy duty makes ISI marked ) 15mm (Fifteen millimetre) as per specifications including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. brass pillar tap of Continental/Classic/ Florall series of Jaguare/Hindware/Cera 15mm (fifteen millimetre) dia (Heavy duty makes ISI marked No. 8931 & 8934) as per specifications including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. brass full way valve with wheel of continental series of Jaquar/ contess plus series of Hindware/ Ocean series of Cera/ Vintage series of Kerovite/ Hindon serie sof Jal within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing brass ball valve ( Horizontal plunger type) high pressure with copper float 20mm (Twenty millimetre) nominal bore of continental series of Jaguar contess plus series of Hindware/ Ocean series of Cera/ Vintage series of Kerovite / Hindon series of Jal within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing PVC single Equal Branch with oval access door ISI Marked of Supreme/ Finolex with insertion rubber washer 3 mm (Three millimetre) thick bolt and nuts complete including fixing with approved adhesive etcetra Complete including carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

75 mm ( Seventy five millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

Providing and fixing PVC double Equal Branch with oval access door ISI Marked of Supreme/ Finolex with insertion rubber washer 3 mm (Three millimetre) thick bolt and nuts complete including fixing with approved adhesive etcetra Complete including carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

75 mm ( Seventy five millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

Providing and fixing PVC door bend with oval access door ISI Marked of Supreme/ Finolex with insertion rubber washer 3 mm (Three millimetre) thick bolt and nuts complete including fixing with approved adhesive etcetra Complete including carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

75 mm ( Seventy five millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

Providing and fixing PVC offset 45 degree ISI Marked of Supreme/ Finolex complete including fixing with approved adhesive etcetra Complete including carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

75 mm ( Seventy five millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

Providing and placing water tank of PVC (Poly venyl chloride) Sintex/Supreme/Finolex (Triple layer) ISI marked having capacity 1000 ( One thousand) litres each with necessary fitting including over flow pipes, scour pipe, ball valve and with cover locking arrangement of good quality including providing pads of sizes as required good quality all complete as per specifications including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:4:8 (One Cement isto Four Sand isto eight) graded stone aggregate 40mm (Forty millimetre) nominal size for haunching of pipes of the 150 mm ( One hundred fifty millimetre) internal diameters, necessary form work and curing complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size), foundation concrete 1:4:8 (One cement: Four sand: Eight graded crushed stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including C.I. cover with frame (light duty single seal pattern–I) 450x610mm (Four hundred fifty into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size), foundation concrete 1:4:8 (One cement: Four sand: Eight graded crushed stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including P.C.C (Precast Cement Concrete) cover with frame (Medium duty single seal pattern–I) with 200mm (Two hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Constructing brick masonry chamber for under ground CI inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement : five sand) cover with frame (light duty) 355mmx6mm internal dimensions total weight of cover with frame to be not less then 38Kg. (weight of cover 23Kg. and weight of frame 15Kg) RCC top slab with 1:2:4 (one cement : two sand : four graded stone aggregate 20mm nominal size) foundation concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40mm nominal size) in side plaster 15mm thick with cement mortar 1:3 (one cement : three sand) finished smooth with floating coat of neat cement on wall and bed concrete etc. complete. Inside dimension 455x610x450mm deep single pipe line. The rates are including cost and carriage within all leads and lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Excavation in foundation, trenches etcetera in earth work involving all classification of soil such as pick work, pick jumper work, blasting work, soft or hard rocks including chiseling/wedging out of rocks where blasting work is prohibited or any other mixed variety of intermediate soil, dewatering and removal of slush if arrisen during course of construction and lifts upto all heights including stacking the excavated soil not more than three meters clear from the edge of the excavation and then returning the stacked soil in 15 cm (fifteen centimeter) thick layers when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus excavation earth within all leads,lifts by any mode of transportation and other incidental, as per the direction and entire satisfaction of Engineer-in-Charge. Any loss to the private and public property during course of construction shall be absolute responsibility of the contractor. Rate inclusive royalty, malkana, toll tax, GST and other taxes imposed by the government.

Providing and laying cement concrete 1:5:10 (One cement isto five sand isto ten aggregate) graded crushed stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth as per approved specification and drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls up to any thickness / any height . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like floor etc. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compresive strength 20N/mm2 (twenty newton per square millimetre) with cement content not less than 320 kg/cubic meter mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design including cost of form work but excluding cost of reinforcement for reinforced concrete work in wall (any thickness but not less than 0.10 metre thickness) including attached pilasters, buttresses, plinth and string couses upto all floor levels including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Supplying and fixing cast iron cover with rectangle frame 445 x 610 mm (light duty) single seal pattern of the weight of cover to be not less than 23 kg (Twenty three Kilogram) complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 110 mm ( One hundred ten millimeters) high pressure PVC spigot and socket soil, waste and ventilating pipes ISI Marked including fixing with approved adhesive etc. Complete of Finolex/Vectus/red pipe within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge Rate inclusive toll tax, GST and any other taxes imposed by the government.

C M RANA