GENERAL-Upgradation of coastal roads in Kannur District 2024-25-Improvements to Narath East LP school -Thaliyil Mukk Road in Narath Gramapanchayath in Azhikode LACGeneral Civil Work

Amount

Road work

2.1:Clearing Grass and Removal of Rubbish Clearing grass and removal of rubbish up to a distance of 30m outside the periphery of the area as per Technical Specification Clause 201. By Manual Means

OD3442/2024-2025:Engaging HYdraulic Excavator of 1 cum bucket including driver and fuel

3.2:Preparation of Foundation for Embankment Scarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical Means Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.

OD3708/2024-2025:Filling with Quarry Muck Filling up low lying and water logged areas with local material/quarry muck , spreading in layers ,leveling the top at site and consolidation by ramming , etc complete for improving the CBR value of subgrade

11.4.1.1:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I. P.C.C grade M 10 (i) Nominal mix 1:3:6

11.4.4:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 IV. R.C.C grade M 20

12.7:Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructure complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202

OD10082/2024-2025:Supplying and stacking 36mm hard blue granite stone, cost includes all materials labour charges etc. complete.

OD10101/2024-2025:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials ) after applying supplying a priming coat of hot bitumen S65 using 36mm departmental broken stone and compacting with power roller to get a compact surface KSSR 3.6.12

5.2.1a:Tack Coat<br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

5.11.1.A.2a:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 <br> Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 <br> By Manual Means :- Type A <br> (II) Bitumen (S-65)

Concrete Road

OD9888/2024-2025:Providing Wearing coat on concrete slab by adding extra materials of light quantity of abrasion resistant to confirm IS-1237(like Nito floor hard top) at 3 kg/m2 sprinkled in uniform over the concrete including floating hard and trowelled smooth to get a uniform hard surface and providing wire mesh impression and making necessary grooves for various joints including all cost of material, labour, hire charges etc. complete.(based on Approved data for TS Number HED/CEHED/ESD_TS/71/2023-5_1_1 Dated 29/03/2023)

P P MANOJ (BID ID -2190288)

Bidder Name

P P MANOJ

LIJILKUMAR POLA