GE AF/AMB-T-35/2023-24 REPAIR TO JOINERY, FLOORING, ROOF, MISC B/R WORKS AND PERIODICAL SERVICES AT AF STN KALPI UNDER GE (AF) AMBALA

Amount

Taking down chowkhats or frame not exceeding 1.5 sqm each with shutter(s) (without taking off shutters from the frame), including removing from site and making good the disturbed surface as per original( except filling of hold fast concrete) , complete all as specified and directed.

All as per srl Item No 1.00 here-in-above but exceeding 1.5 Sqm and not exceeding 4 Sqm, complete all as specified and directed.

Taking down shutters of any description exc 1.00 m and n.exc 2.00 Sqm. complete all as specified and directed.

Supply and fixing steel window (box type) factory made double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including welding of guard bars including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 and dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from the office of GE (AF) Ambala. (ii) Glazing & wire gauge shall be measured and paid separately.

Supply and fixing Pressed steel frames size 125mmX60mm for doors with one or more rebates incuding necessary fixing lugs, hinges lock strike plate, etc.., complete all as specified and directed.

Supply and fixing 35 mm thick, 2nd class hardwood rail and style plain, framed, panelled shutters (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face. The size of rail and stile as per IS :1003 (Part I), kiln seasoned and chemically pressure treated and directed as Engineer-in-Charge

Supply and fixing to chowkats, 35mm thick,2ndst class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a).

M/L Factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked, complete all as specified and directed.

Supply and fixing Solid PVC Door frame of size 50 mm x 47mm made out of 5mm plain PVC sheet reinforced with 19mm x 19mm M.S. Square tube profiles are mitred cut at corners and joined by inserting 2 Nos 150 mm long brackets of 15mm x 15 mm MS square tube shall 19 mm x 19 mm in square tubes and suitably scruwed suppling & fixing in opening, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixed in the frame at site complete as per specification and drawing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Butt hinges 125 mm size, medium weight, cold rolled mild steel complete all as specified and directed.

Supply and fixing 300mm long, Aluminium alloy, anodised sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

Supply and fixing 200mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.

Supply and fixing aluminium handles, cast type, anodised 150 mm size complete all as specified and directed.

Supply and fixing galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

Supply and fixing 3 mm thick ordinary quality and glazing with oil putty in squares n. exc 0.5 Sqm in each pane complete all as specified and directed.

Material and labour for preparing surfaces of new or previously untreated surfaces of steel or metal works and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over 10cm in width or girth complete all as specified and directed.

Material and labour preparing new or previously untreated surfaces of wood & wood based and applying two coats of synthetic enamel paint over a coat of pink primer, over 10 cm in width or girth complete all as specified and directed.

Supply and Fixing for bands,straps, hold fasts ; wall ties, plate washers and similar small articles confirming to Fe-209 Gde-E-165 complete all as specified and directed.

Material and Labour PCC (1:3:6), type C1, (using 20 mm graded stone aggregates) as in filling of MS sheet chowkats, fixing of hold fast and window chajja complete all as specified and directed.

Supply and fixing mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed with screw to wooden frames or with welding to steel frames complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed with screw to wooden frames or with welding to steel frames complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Supply and fixing in repair Door closer hydraulically regulated, designation No. 2, universal type of aluminium body suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg fixed to door frame with screws or welding complete complete all as specified and directed by Engineer-in-Charge.

Material and labour anodised aluminium door and chowkhats made out of hollow extruded aluminium section as mentioned below. Each door shall be provided with 02 Nos disc or D type aluminium handles, 02 Nos aluminium tower bolts 200mm long, one brass mortice lock of six levers with key in duplicate and shall be regulated by provided double action hydraulic floor door spring/hydraulic door closer (Make sandhu/RITZ). Shutter to be partly glazed with and including 5mm thick tinted glass and partly panelled with and including 12mm thick prelaminated particle board with decorative laminations on both sides, rubber beading/gasket, anodised aluminium beading, screws complete in all respect all as directed by the Engineer-in-charge. Chowkhat/frame : 101.6x44.45x1.5mm thick Shutter top and bottom rail : 114.3x44.45x1.5mm thick Shutter middle rail : 83.5x44.45x1.5mm thick Shutter vertical/style : 83.5x44.45x1.5mm thick MAKE : (i) Anodised aluminium section : JINDAL, HINDALCO, INDALCO (ii) PARTICLE BOARD : NOVAPAN, KITPLY, BHUTAN BOARD (iii) Glass : saint gobin, modi guard, TATA.

Supply and fixing anodised aluminium window including aluminium grill made out of hollow extruded section as mentioned below and glazed with tinted glass 4mm thick fixed with glazing clips rubber beading/gasket anodised aluminium beading screw and lock type handles of size 75mm, 2 Nos aluminium tower bolts 150mm long etc complete all as specified and directed with the following sizes:- Chowkat/Frame Size : 101.6x44.45x1.5mm thick Mullion: Not less than 0.55Kg/RM Shutter : Not less than 0.55 Kg/RM

Demolition of plain cement concrete (un-reinforced) in gound floors and paving n exc 15 cm thickness (below or above ground level) including removal of debries to distance exc 50 mtr n exc 250 mtr, complete all as specified and directed.

Material and labour for 25mm thick PCC 1:2:4, (20mm graded aggregate in sub base complete all as specified and directed.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, including 20 mm thick screed bed in cement mortar 1:6, complete all as specified and directed

Material and labour for non-skid ceramic coloured floor tiles 7-8 mm thick (square /rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm set and jointed in neat cement slurry and pointed with white or coloured cement to match, including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed by Engr in charge.

Material and labour for light shade vetrified ceramic tiles 10mm thick (square/rectangular) polished, arrea of each tiles not exceeding 0.36 sqm, in floors etc. etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles colour, including 15mm thick screed bed (in CM 1:6), complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 450x 300X 7mm thick set and jointed in neat cement slurry and pointed in colour cement to match colour of tiles complete including a coat of neat cement slurry with 3.0 kg of cement per sq. metre. over 10 mm thick rendering in CM 1:4 all as specified and directed by Engr-ln-Charge

M & L for kota stone 20-25mm thick in riser , skirting, dado etc laid over cement screed and jointed with grey cement slurry mixed with pigments to match with the shade of the slab including rubbing and polishing including 10mm thick rendering as in backing, in CM 1:4 complete all as specified and directed all as specified and directed

Material and labour 75 mm thick cement concrete type C2, 1:3:6 using (40mm graded mechanically crushed stone aggregate) as in plinth protection and platform and floor.etc, finishing cement concrete surface even and smooth with out using extra cement complete all as specified and directed by Engineer-in-Charge.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

M & L for 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with 'L' type or 'J' type or cranked hook bolts in roofs complete all as specified and directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved having tensile strength of 550 Mpa and grade AZ 150 as in roof covering and cladding complete all as specified and directed.

S & F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa and grade AZ 150 as in ridge to roofl, fixed with self taping screws complete all as specified and directed.

Dismantling of mild steel work or wrought iron of any description in any position complete all as specified and directed.

S & F mild steel flat iron wind ties for for roof including secruing bolts, including necessary driling and similar works conformig to Fe-290 Gde E-165 complete all as specified and directed.

M & L for MS work in tubular/ roof trusses (framed) trussed, purlins ,crane gantries,rails , stanchions and fastenings and heavy bracket framing (beam ,tee, channel, angle or flat section confirming to Fe-410-W (Gde-250 quality A) complete all as specified and directed.

Supply and fix for MS screw bolts any size ( machine made) with hexagonal square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but not exc 10 cm long complete all as specified and directed.

Demolition of mud phuska in roof any thickness and loweringdown and removing complete all as specified and directed.

Dismantling roof brick tiles or terrasing tile single layer complete all as specified and directed.

M/L Rendering 15 mm thick (Average thickness) rendering on roof surface including flashings and junction of parapets etc., finished even and fair on in cement mortar (1:3), using water proofing compound as per recommended ratio, after brushing cement slurry complete all as specified and directed. Note:- water proofing compound shall be measured and paid seperately

M/L PCC type B-1 (1:2:4), using 20 mm graded stone aggregates as in roof kerbs or mud stops, rounded or chamfered on edges surface channels and drains,Filling of MS sheet chowkats ,roof padding complete all as specified and directed.

M/L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm & adjoining vertical surfaces over clean RCC/plastered roof surfaces complete all as specified and directed.

M/L 40 mm thick brick tiles laid on cement mortar (1:6), 15 mm thick and joints filled with flush pointing in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on complete all as specified and directed.

M/L 40 mm thick brick tiles (Except tiles) including cleaning cement mortar and laid on cement mortar (1:6) , 15 mm thick and joints filled with flush pointing in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.

Material and labour for APP polymeric water proofing membrane minimum 3 mm thick and weighting not less than 3 kg/sqm of Make:-STP Texsa Ltd or hyper plas (Polyster),black finish reinforced with non-woven polyster matt (Weight not less than 150 gms/Sqm) with thermo fusible finish laid over compatible bitumen primer at the rate of 0.40 Ltr /Sqm torching over laps with a propane or abutan gas torch with a over lap of 75 mm at the side and 100 mm at the ends and sealing including applying a coat of cold emulsion bituminious primer all as per manufacturers instructions including preparation of surface complete all as specified and directed by Engr-in-Charge. Note:-(i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 10% amount of the total amount of water proofing treatment shall be retained as a guantee and shall be released after 10 years.However contractor may deposite the FDR of same amount in favour of GE.If contractor fail to rectify the defect pointed out during this period in writting,the defect shall be got rectified at contractor'risk and cost and the payment shall be made from the amount kept reserved or by encasing the FDR deposited by the contractor as guarntee.Contractor's quoted rate for this item shall deemed to be inclusive of this aspect.

Suppy only intergral water proofing compound complete all as specified and directed.

Cutting groove in parapet wall 75 mm wide and 65 mm deep, complete all as specified and directed.

Cutting out cracks to V-section in existing roofs or terracing up to 25 mm depth, cleaning out, and filling solidly with a tarplastic sealing comound after applying shalitex primer complete all as specified and directed.. MAKE OF SEALING COMPOUND: STP, CHOKSY.

Taking down cement plaster of any description on brick walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Demolition of brick work built in cement mortor including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed.

Material and labour rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces fair and even smooth without using extra cement complete all as specified and directed.

Material and labour rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surfaces fair and even smooth without using extra cement complete all as specified and directed.

Material and labour rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 on ceiling allt complete all as specified and directed.

Material and labour Brick work with sub class 'B' bricks, using old size bricks straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

All as per srl Item no 61.00 here-in-before , but except bricks complete all as specified and directed.

M&L for preparation of new surfaces by incl cornices & pillasters and applying two coats of Oil bound distemper on walls over a coat of alkali resistant priming paint, over a coat of wall care putty complete all as specified and directed.

M & L Preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of wall care putty complete all as specified and directed.

M & L Preparation of newly plastered surfaces on ceiling and applying two coats of white wash on ceiling complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc or insulation boards/slabs/blankets,any thickness including cover fillets complete all as specified and directed.

12mm thick Perforated particle board /tiles for insulation and accoustic purpose, 60x60 cm in size, fixed with nails to timber frame work wth staples on ta a snap grid complete all as specified and directed.

S& F of Size of grid 605 x 605mm Anodised aluminium snap grid for work for false ceiling complete all as specified and directed.

S&F Hanger of GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long expension hold fastener 12.5mm dia. 40 mm long complete all as specified. made out of GI flat 40x3mm size 60 mm long complete complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC Sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings, complete all as specified and directed.

S&F 5 mm thick PVC Sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

Taking up or down steel tubing and connections, for refixing or removal from site for 15mm bore pipe, complete all as specified and directed.

Supply and fixing , 15 mm bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc fixed to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old steel tubing 15mm bore and connections (taken out GI tubing from item No. 36 above) in new or old position (walls, ceiling, floors, etc) incl cleaning complete all as specified and directed.

Supply and fixing in repair, Drapery rods, fancy type , made of mild steel conduits with PVC insulation, 20mm bore having facny end knobs at each end, fixed with rawl plug to wall as in curtain rods complete all as specified and directed. (Quality and design shall be as approved by GE).

Supply and fixing in repairs Fancy type bib tap brass CP ( Long body) 15mm bore complete all as specified and directed.

S & F in repair Angle stop cock fancy type CP with long shank 15mm bore as in repairs complete all as specified and directed.

S & F in repair 15 mm bore Concealed stop cock fancy type CP with long shank and cup washer as in repairs complete all as specified and directed.

Supply and fixing in repairs Toilet paper holder, cast copper alloy, chromium plated fixed in position, complete all as specified and directed. MAKE: PRAYAG Cat No. BA-18 or equivalent in, ESS ESS, CZAR, JAQUAR, MARC.

Supply and fixing in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms),complete all as specified and directed.

supply and fixing in repair Cast copper alloy, chromium plated soap dish, complete all as specified and directed. MAKE: PRAYAG Cat No. BA-35 or equivalent in, ESS ESS, CZAR, JAQUAR, MARC.

Supply and fixing in repairs Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm IN REPAIR, complete all as specified and directed. MAKE: PRAYAG, POLYTUF

Supply and fixing in repairs PVC bend any radius, conforming to IS:14735, suitable for uPVC soil waste discharge pipes 110 mm size, complete all as specified and directed. MAKE: SUPREME, FINOLEX, PRINCE, DIPLAST.

Supply and fixing in repairs PVC bend any radius, conforming to IS:14735, suitable for uPVC soil waste discharge pipes 75 mm size, complete all as specified and directed. MAKE: SUPREME, FINOLEX, PRINCE, DIPLAST.

Supply and fixing in repairs PVC cowl any radius, conforming to IS:14735 suitable for 110 mm bore, complete all as specified and directed. MAKE: SUPREME, FINOLEX, PRINCE, DIPLAST.

Supply and fixing in repairs UPVC floor trap with PVC grating suitable for 75 mm external dia, type-B pipes, ISI marked complete all as specified and directed. MAKE: SUPREME, FINOLEX, PRINCE, DIPLAST.

Supply and fixing in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement for 110 mm external dia, type-B pipes, ISI marked complete all as specified and directed. MAKE: SUPREME, FINOLEX, PRINCE, DIPLAST.

Disconnecting exc 250 and n exc 500 litres capacity water tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position. (cleaning repairing , etc measured separately). complete all as specified and directed.

Material and labour for cleaning and removing all scale and dirt, etc from PVC tanks exc 250 but n. exc 500 litre capacity tanks from mouths of circulating pipes, etc complete all as specified and directed.

Disconnecting exc 500 and n exc1000 litres capacity water tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position. (cleaning repairing , etc measured separately).

Material and labour for cleaning and removing all scale and dirt, etc from PVC tanks exc500 but n. exc 1000 litre capacity tanks from mouths of circulating pipes, etc complete all as specified and directed.

Material and labour for dismantling water tank exc 250 but not exc 500 Litres capacity and removing to store complete all as specified and directed.

Supply and fixing 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I.

Material and labour for dismantling water tank exc 500 but not exc 1000 Litres capacity and removing to store complete all as specified and directed.

Supply and fixing 750 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I.

Supply and fixing 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I.

Supply and fixing in repairs, PVC valveless, syphonic action type, flushing cistern (ISI marked) of 10 litres capacity, low level (white) with inlet, ball valve, float and handle including bracket and flush pipe complete all as specified and directed.

Supply and fixing in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc including all accessories reqd complete all as specified and directed..

Supply and fixing in repairs Vitreous China wash down water closet pan (pedestal pattern), coloured, including fixing acessories, complete all as specified. MAKE: HINDWAREr equivalent in CERA, PARRYWARE. (Range of colour- Superior colour of CERA)

Supply and fixing in repairs PVC coloured water closet seat and cover with & including mild steel chromium plated hinging device & rag bolts, complete all as specified and directed. MAKE: CERA or equivalent in HINDWARE, PARRYWARE.

Supply and fixing in repairs, 15 mm bore pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed..

Supply and fixing in repairs Vitreous china wash basin, white, flat back, size 640x450mm excluding taps, waste , chain and plug and porcelain stopper but including brackets complete all as specied and as directed by Engr-In-Charge

Supply and fixing in repair, waste coupling PTMT (half or full threaded) (minium weight 32mm/45gms) suitable for dia of discharge pipe 32mm complete all as specified and directed.

Supply and fixing in repairs , Vitreous China Urinal, half stall type, white, (excluding flushing cistern and flush pipe and waste pipe complete all as specified and directed. MAKE: HINDWARE or equivalent in CERA , PARRYWARE.

Preparation of old treated/decorated surfaces (plastered or unplastered/concrete wall cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds mass efflorescent salts trading old and greasy spots etc and applying one coat of colour wash complete all as specified and directed by Engineer-in-Charge.

All as per Serial item No 107 here-in-before but one coat of cement base paint on old treated surfaces of walls incl a coat of wall care putty, including all necessary staging, scaffolding, safety precautions, etc as required to work at any height, complete .

Material and labour for two coat of oil bound distemper on old decorated surfaces of walls including preparation of surfaces by scraping down, filling with putty all holes and cracks and a coat of putty complete all as specified and directed by Engineer-in-Charge..

Material and labour for one coat of synthetic enamel paint on old painted wooden surfaces of any description exc 10cm width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge..

Description all as per item No. 110 here-in-before but on old steel surfaces complete all as specified and directed.

Material and labour for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth. complete all as specified and directed by Engineer-in-Charge.

.M&L for 18-20mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

SWAMI ENGINEERS

Swami Enterprises

Anil jindal and sons

Shiv Construction Co.