Construction of Office building In Agriculture Research Station at NAU,Vedchha (2nd Attempt)

Name of work: CONSTRUCTION OF OFFICE BUILDING IN AGRICULTURE RESEARCH STATION AT NAU,VEDCHHA

It No. Description Total Qty. Per Amount

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or Hard soil.

Excavation for foundation for depth from 1.5 m to

m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead. (B) Dense or Hard soil

Providing and laying cement concrete 1:3:6 (1-Cement

: 3- coarse sand : 6- hand broken stone aggregates

3 mmnominal size) and curing complete excluding cost 17.44 3080.90 Cum

of formwork in (A) Foundation and Plinth

Boring holes 3.5 m deep in ordinary soil (for cast in

situ piles) and getting out the soil and disposal of the

4 surplus excavated soil as directed within a lead of 50 8.00 1335.62 Each

Meter for following diameter of pipes.(ii) 250 mm

Providing and laying controlled cement concrete

M.250 and curing complete excluding the cost of

5 formwork and reinforcement for reinforced concrete 1.20 4678.32 Cum

work in (A) Foundations, footings, Base of columns

and Mass concrete. (Auger Concrete)

Providing and laying controlled cement concrete

M.250 and curing complete excluding the cost of

formwork and reinforcement for reinforced concrete

work in (A) Foundations, footings, Base of columns

and Mass concrete.

Providing and laying controlled cement concrete

M.250 and curing complete including the cost of

7 formwork and excluding cost reinforcement for

reinforced concrete work in (D) Columns, Pillars posts

UPTO PLINTH 3.50 8735.49 Cum

FROM GROUND TO TERRACE 4.40 8735.49 Cum

TERRACE TO STAIRCABIN 2.30 8735.49 Cum

Providing and laying controlled cement concrete

M.250 and curing complete including the cost of

formwork and excluding cost reinforcement for

8 reinforced concrete work in (C) Slabs, landing, shelves,

Balconies, Lintels, Beams, Girders and Cantilever upto

floor two level. (for beams)

GROUND AND PLINTH BEAM 12.90 6522.58 Cum

FOR TERRACE FLOOR BEAM 6.00 6522.58 Cum

FOR STAIRACBIN BEAMS 1.40 6522.58 Cum

Brick work using common Brunt clay building bricks

having crushing strength not less than 35 Kg./Sqcm. in

9 cement mortar 1:6 (1cement : 6 fine sand) 10.00 4121.54 Cum

CONVENTIONAL Masonary in Foundation and plinth

Filling available excavated earth (excluding rock) in

Trenches, plinth, sides of foundations etc. in layers

not exceeding 20 cm in depth consolidating each

deposited layer by ramming and watering).

Filling in foundation and plinth with murrum or

11 selected soil in layer of 20 cm thickness including 102.50 296.29 Cum

watering ramming and consolidating etc.

Providing and laying controlled cement concrete

M.250 and curing complete including the cost of

formwork and excluding cost reinforcement for

reinforced concrete work in (C) Slabs,landing, shelves,

Balconies, Lintels, Beams, Girders and Cantilever upto

floor two level.(FOR SLABS )

First Floor Slab 25.13 7035.66 Cum

Terrace Floor Slab 1.04 7035.66 Cum

Providing and laying controlled cement concrete

M.250 and curing complete excluding the cost of

formwork and reinforcement for reinforced concrete

13 work in (C)Slabs,landing,shelves,Balconies, Lintels, 3.00 6017.12 Cum

Beams, Girdersand Cantilever upto floor two level. For

Staircase and Landings

Providing and laying controlled cement concrete

M.250 and curing complete including the cost of

formwork and excluding cost reinforcement for

reinforced concrete work in

C)Slabs,landing,shelves,Balconies, Lintels, Beams,

Girders and Cantilever upto floor two level.

For Lintels and Coping

Ground Floor 3.00 6328.66 Cum

First Floor 2.00 6328.66 Cum

Providing and laying controlled cement concrete

M.250 and curing complete excluding the cost of

formwork and reinforcement for reinforced concrete

15 work in (C) Slabs,landing,shelves,Balconies, Lintels,

Beams, Girders and Cantilever upto floor two level..

Ground Floor Chajja 0.55 6658.93 Cum

First Floor Chajja 0.12 6658.93 Cum

Providing & laying controlled cement concrete M-25

and curing complete including the cost of form work

16 but excluding the cost of reinforcement for reinforced 1.80 8513.29 Cum

concrete work, (Design Mix use as directed by

EIC/PMC. No Extra rate can be paid.) in Walls etc.

Providing TMT Bar FE 500D reinforcement for R.C.C.

17 work including bending, binding and placing in

position complete upto floor two level

Upto Plinth Level 4822.70 77.28 Kg

From Ground to First Floor 3406.60 77.28 Kg

From First to Terrace Floor 707.80 77.28 Kg

Carrying out plinth treatment to post construction /

existing structure by spraying chemical solution for

TERMITE CONTROL TREATMENT including labour and

material consistent with I.S.I. specification. Using

Chlordene and Chiorpurfiles 20 EC. As per 6131_paret-

18 II Consentration weight one percent is recommended 91.40 81.20 Sqm

i.e. one litre 20 EC chemical emulsion with 19 litre give

1% concrentration inclusive of one litre chemical

emulsion application at the rate of 5 Litre / Sq.m of

surface is recommended as per I.S. Etc. complete as

directed by EIC.

Brick work using common burnt clay building bricks

19 having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:6 (1-

Cement : 6 -fine sand)(B) Conventional

From Ground toTerrace Floor 30.01 4403.39 Cum

From Terrace to Stair Cabin 16.00 4444.89 Cum

(i) Half brick masonry in common brunt clay building

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -

coarse sand ) in foundation and plinth (B)

From Ground to First Floor 56.00 669.33 Sqm

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor

two level and finished even and smooth in (i)Cement

mortar 1:4 (1-cement:4-sand) and finishing with neat

cement slurry. Internal plaster on ceiling at ground

floor, first floor

Ground Floor ceiling 89.00 179.52 Sqm

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished

22 even and smooth in (iii) Cement mortar 1:4 (1-

cement:6-sand) FINISHING with floting coat of neat

cement SLURRY . Internal plaster on walls at ground

floor,first floor

ALL FLOORS 356.20 249.48 Sqm

20mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of

23 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete.

From Ground to First Floor 206.00 339.14 Sqm

Providing and fixing window having extruded

aluminum Colour anodized section frame main outer

size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt

horizontal Three track member size 92mm x 31.75mm

x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size

92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with

sliding shutters of horizontal member size

mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc

Providing and fixing standared extruded of alluminium

section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg

25 / Rmt with colour anodized alluminium frame with 5 1.90 1524.99 Sqm

mm thick transparent bronze colour tinted float glass

as details etc complete for Fix window.

Providing and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x 1.2mm @ Wt.

0.643 Kg/mt with colour anodized alluminium frame

for ventilation with 5 mm thick frosted glass as details

etc complete for Ventilation

Providing & fixing 35mm.th. Flush Door Solid Double

Core type Both Face water proof Ply Vennered &

mm th.laminate shall be pasted on both side with

adhesives as specified by the manufacturers. The

27 laminate shall be as per approved shade & texture, of 14.00 3397.60 Sqm

make incl. Sal wood frames of finished size 12cm x

7cm.incl. S.S. Hinges with nessary screws & Anodized

aluminum fixtures & fastenings For all Floor

Providing and laying polished Granite Slab 18mm thick

in Risers of steps, Dedo, window sill, jembs and pillars

laid 10mm thick Cement Mortar 1:4 (1-Cement : 4-

Coarse Sand) and jointed with Grey Cement Slurry

including full molded round front edges , rubbing and

polishing etc. complete.

Providing and laying polished Kota stone slab flooring

over 20mm (Average) thick base of cement mortar 1:6

(1-cement : 6-coarsesand) or L.M. 1.1.5 (1-Lime putty

:1.5 - coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match theshade

of slab including rubbing and polishing etc. complete.

Providing and laying polished kota stone slab 25mm

thick in risersof steps,skirting Dedo and pillars laid on

10mm thick cementmortar 1:3 (1-Cement : 3 coarse

30 sand) and jointed with gray cement slury mixed with 5.70 1089.18 Sqm

pigment to match the shade of slab includingrubbing

and polishing etc. complete.

P & L 24" x 24" vitrified 8 mm thick tile flooring over

20 mm(average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete for light shade

P & L 24" x 24" vitrified 8 mm thick tile flooring over

20 mm(average) base of cement mortar 1:6 (

cement: 6 coarse sand) onnew surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

Providing and laying Vitrified tiles 8 to 10 mm thick

24'' x 24'' in skirting risers of steps and dedo on 10mm

33 thick cement plaster 1:3 (1-cement : 3-coarse sand) 32.60 1169.98 Sqm

and jointed with white cement slurry

Providing cement vata (10cm. x 10 cm. size) quarter

round in cement mortar 1:1 including neat cement

finishing, watering etc.complete.

Providing throating or plaster drip and moulding to

35 R.C.C. Chhajja or projection. (For all Floor) 33.00 43.21 Rmt

Applying two coats of Birla (White Cement based) or

asian (acrylic lapy-putty) or as per make list & two

coats of primer of approved brand and manufacture

36 on new wall surface to give an even shade including 426.00 40.59 Sqm

thoroghly brushing the surface free from mortar

dropping and other foreign matter and sand papered

Distemparing (Two Coats) (5 years warranty)With Oil

Bound washable distemper of approved brand And

Manufacture And of Required Shade on Wall Surfaces

to give an even Shade, over and including a priming

Coat with alkali resistance primer of approved brand

after thoroughly Brushing the surface and other

foreign matter and also including preparing the

surface even and sand prepared smooth.(The

Contractor must provide the colour warranty

certificate issued by company authority)

Finishing wall With Weather proof exterior emulsion

Paint on wall Surface (Two Coats)(5 years warranty) to

give an required shape even shade after thoroughly

38 brushing the surface to remove all dirt and remains of 195.00 117.40 Sqm

loose powdered Materials etc. Complete (The

Contractor must provide the colour warranty

certificate issued by company authority)

Providing and fixing M.S. Grills of required pattern to

wooden / Stone frames of window etc. with M.s. flats

at required spacing and frames allround, square or

round bars fixed with round headed bolts and nuts or

39 by screws, including one coat of primer of approved 186.00 112.11 KG

quality and brand & two coats of synthetic enamal oil

paint etc. complete as per detail drawing and as

directed by Engineer in charge.

Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces

etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with

proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the

surface before tratment.

(b) Laying cement concrete using broken bricks/brick

bats 25 mm to 100 mm size with 50% of cement

mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to

IS:2645,brick bats is finally covered by jointless

cement plaster 20mm th. in cu.m. 1:4 added with

special water proofing compound confirming to

IS:2645 & top smooth finished with trowel with false

chequered marking of 300 mm.size.The treatment is

carried along the vertical surface of the parapet &

other adjoining wall up to height of about 300 mm in a

shape of quarter round vata Incl. curing etc. Comp.

With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing

and for final test. All above operations to be down in

order and as directed and specified by the engineer-in-

charge. With average thickness of 120 mm and

minimum thickness at khurra as 65 mm. (Cement

consumption 0.511 Bags / sq.m.) NOTE :- (1) The

whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a

prescribed proforma duly stamped (2) The rate shall

include for work at all floors & conducting water

proof test as directed. Unit Rate of 1 Sq.Mt

Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out

upto surface using white cement including rounding

off junctions and extending them upto 15 cm along

the wall,clearing with water and oxalic acid etc. as

Providing and fixing Stainless Steel ( Grade 304) railing,

gate, ledder,grill etc, made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing,

polishing and making curvature (wherever required)

and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with

necessary accessories & stainless steel dash fasteners

stainless steel bolts etc., of required size, on the top of

the floor or the side of waist slab with suitable

arrangement as per detail drawing and as directed by

Engineer in charge.

Providing laying and jointing in true line and level

a..U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe

43 shall be fixed on the wall with the help of clamp at 10.00 72.64 Rmt

every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.15MM DIA

Providing laying and jointing in true line and level

a..U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe

44 shall be fixed on the wall with the help of clamp at 10.00 91.83 Rmt

every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials. 25MM DIA

Providing laying and jointing in true line and level

a..U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe

45 shall be fixed on the wall with the help of clamp at 20.00 148.11 Rmt

every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.40 MM DIA

Providing and fixing to wall ceiling and floor 6.0 Kg.

F/Cm2 working pressure polythene pipes of the

following outside Dia. Low densidy, complete with

46 special falnge compression type fittings, wall clipsetc. 10.00 339.04 Rmt

including making good the wall ceiling and floor.(F)

Providing and fixing to wall ceiling and floor 6.0 Kg.

F/Cm2 working pressure polythene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(F)

Providing, laying and jointing (to level or slopes)

110mm diameter PVC-U SWR pipes (Type B)

conforming to IS 13592-1992 with one end plain and

other end socketed with rubbering and fitting

conforming to ISI 14735-1999 of ISI (PRINCE /

SUPREME / ASTRAL / FINOLEX / Equivalent) for

drainage-line fitted in trenches including excavation

48 for trenches & refilling, Pipe shall be jointed with each 10.00 1055.45 Rmt

other with rubber lubricant, including necessary

fittings such as bends, shoes etc. including testing of

pipe & joints and jointed with adhessive solvent

cement including the cost of all materials etc...

completed as directed by E.I.C.(110mm Dia.)

Providing, laying and jointing (to level or slopes)

160mm diameter PVC-U SWR pipes (Type B)

conforming to IS 13592-1992 with one end plain and

other end socketed with rubbering and fitting

conforming to ISI 14735-1999 of ISI (PRINCE /

SUPREME / ASTRAL / FINOLEX / Equivalent) or

49 approved brand for drainage-line fitted in trenches 10.00 1028.18 Rmt

including excavation for trenches & refilling, Pipe shall

be jointed with each other with rubber lubricant,

including necessary fittings such as bends, shoes etc.

including testing of pipe & joints and jointed with

adhessive solvent cement including the cost of all

materials etc... completed as directed by E.I.C.

Providing, laying and jointing (to level or slopes)

110mm diameter PVC-U RIGID pipes (Class 2) with

working pressure 4 kg/cm² conforming to IS 4985-

2000 with one end plain and other end socketed with

rubbering and fitting conforming to ISI 7834 of ISI

(PRINCE / SUPREME / ASTRAL / FINOLEX) or approved

brand for Rainwater line fitted in floors or walls. Pipe

shall be jointed with each other with rubber lubricant,

Pipe shall be fixed on wall using PVC clamps at every

2000mm c/c or shall be concealed in wall as directed

including necessary fitting such as bends, tees, shoe

bend, end cap for future expantion etc. including

testing of pipe & joints and jointed with adhessive

solvent cement including the cost of all materials

including cutting and making floors and walls as per

original/good enough if require.... etc., complete. as

directed by E.I.C.

Providing and fixing wsh down water closet (European

type, W.C. Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar 1:1 (1-

Cement : 1-fine sand) (Seal and

cover to be measured and paid for separately)(A)

vitreous China Pattern :(i) in white colour

Providing and fixing washbasin with single hole for

pillar trap at all floor level with C.I. or M.S. Brackets

painted white including cutting holes and making

good the same including (A) Vitreous china flat back

wash basin 550mm x 400mm size in white colour (a)

52 providing and fixing C.P. brass waste for wash basin or 2.00 2134.42 Each

sink(A) 32mm (b) providing and fixing M.I.fisher union

for wash basin or sink(A) 32mm (c) piller tap,capstan

head, screw down high pressure with screw shanks

and back nuts for 15mm dia. for all floor (d)brass

screw down stop tap (e)Rubber plug for sink or

washbasin (f) chromium plated bottle trap with

necessary coupling of approved quality for wash basin

Providing and fixing Urinal of approved quality

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

Providing and fixing plastic seat and cover for wash

down water closer with C.P. brass hinges and rubber

buffers. (B) Black plastic seal and cover.

Providing and fixing screw down bib taps of following

55 size.(A) Brass screw down bib tap polished bright. (i) 4.00 186.82 Each

Providing and fixing C.P. brass towel rail comlete with

56 C.P. brass brackets fixed to wooden plugs with C.P. 2.00 616.42 Each

brass scews.(B) 600mm x 20mm size.

Providing and fixing 600mm x 120mm glass shelf with

57 C.P. brass bracket and guard rail complete mixed to 2.00 534.81 Each

wooden plug with C.P. brass screws.

Providing and fixing ISI Mark 40mm dia. UPVC Valve in

58 pipeline of approved quality etc. complete as directed 2.00 586.81 Each

by Engineer Incharge.

Providing and fixing ISI Mark 25mm dia. UPVC Valve in

59 pipeline of approved quality etc. complete as directed 2.00 318.15 Each

by Engineer Incharge.

Providing erecting and fixing double coated ISI water

tank of required capacity each with all necessary

fittings and connection etc. complete on terrace

Constructing brick masonry chamber for underground

C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

61 frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-cement 3.00 3660.75 Each

:2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and

bed concrete etc. complete.(ii) Inside dimensions

500mm x 700 mm and 450mm deep for pipe line with

one or two inlets.

Providing and fixing S.W. gully trap with C.I. grating

brick masonry chamber and water tight C.I. cover with

62 frame of 300mm x 300mm size (inside) with standard 1.00 1246.91 Each

weight.(i) Square mouth traps.(B) 150mm x 100mm

size P or R type

Constructing Manhole with R.C.C. top slab in 1:2:4 mix

(1-cement :2-coarse sand : 4-graded stone aggregate

20mm nominal size) foundation concrete 1:3:6 mix (1-

cement : 3- coarse sand :6-Brick bats 40 + 50mm size)

inside plastering 15mm thick with Cement Mortar 1:5

(1-Cement : 5-coarse sand) finished with a floating

coat of neat cement and making channels in cement

concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone

63 aggregate 20mm nominal size) finished smooth 3.00 23470.48 Each

complete including curing and festing (i) Inside size

900mm x 1200mm and 1.5M. deep including C.I. cover

with frame size 560mm diameter total weight of cover

and frame to be not less than 128 kgs. (Wt. of cover

64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick

walls of brick msonry using brick having crushing

strength not less than 35Kg. / Sq.cm. in Cement

Mortar 1:5 (1- Cement: 5-Coarse sand) (3) C type

Providing Metre forPVC

Nahni trapsewer.

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls

65 Rolling shutters having width Above 3.5 Mt. 12.00 2539.55 sq.m.

Providing University Logo and Letter's Of different

sizes Engraved on Black Granite Stone, Painted with

Gold Foil on it. Making a Plaque and Fixing it on the

structure, Price with Labour MR

Providing laying (to level or slopes) and jointing

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with

collars and butt ends prepared for collar joints

including testing of joints complete.(B) 150mm

Providing and fixing in position pre-cast R.C.C.

68 manhole cover and frame of rectangular shape 3.00 1437.65 EACH

600mm X 450mm internal dimensions of approved

quality. Total Civil Work Rs.

ELECTRICAL WORKS

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of

pipe erected with 6A Modular type switch / bell push

& accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single

1 mounting base frame covered with 27.00 449.45 Pt.

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete cat III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted

and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single

2 mounting base frame covered with 7.00 629.23 Pt.

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete cat III

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC

/ Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories [II] For 16A

Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete cat III

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories Cat. III

Providing & erecting Switch board for Computer or

electric apparatus consisting of following modular

type accessories mounted with PVC / Metallic

concealed/open box with single mounting base

frame covered with textured/metallic /white front

5 plate,modules erected with necessary connections 5.00 1081.71 Ea

1 no. 6A/16A universal plug-switch combined. 3 nos.

3 nos. 6A 5 pin Plug

For Modular Type Accessories Cat. III

Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge.

(8) Computer RJ-45 socket Cat.III

Decorative call bell Ting-tong box type 250 volts

complete erected

Supplying & erecting approved make LAN cable of

8 following size in existing pipe as per direction [C] CAT - 70.00 45.45 Mtr.

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated

9 stranded wire of green colour for earth continuity of 20.00 59.59 Mtr.

following size.

(A) With medium class Rigid PVC pipe and

(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated

10 stranded wire of green colour for earth continuity of 161.00 78.78 Mtr.

following size.

(A) With medium class Rigid PVC pipe and

(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(h) 4 wire 6 sq. mm

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary

PVC fittings & Junction boxes fixed with adhesive

solution & Clamps with following dia of pipes, in

approved manner as directed

Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC

13 bushes, Check-nuts etc. complete of following 20.00 20.20 Mtr.

sizes.(2) 25 mm

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same

14 company of MCB to be used) 1.00 2913.85 Ea

(B) three phase incoming and single phase

horizontal type outgoing Per phase isolation

(b) sheet steel double door

providing and erecting Miniature circuit breaker single

pole 6A to 25A suitable to operate on

15 240 V A.C. system and having breaking capacity 13.00 112.11 Ea

10 KA to be erected in existing box. confirming to

IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 415 V MCB Four Pole for Motor

& Inductive Load (C Curve) having 10KA breaking

16 capacity & confirms to IS :8828 in existing box 1.00 668.62 Ea.

having following capacity

(b)40 Amp. Cat.III

providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase

17 V,50Hz. having characteristic of quick action & 3.00 2235.13 Ea

tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating

erected as directed

(ii) 40Amps. DP Cat. III

Supplying KITKAT pattern porcelain cut-out fuse with

18 base of following current capacity erected on existing 3.00 146.45 Ea.

block board. (iv) 63 A 500 V

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make

OEM has to submit test certificate including value of

19 earth resistance of installation duly stamped and 1.00 7095.25 Ea

signed by agency and officer Incharge has to ensure

the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm

/ meter testing as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time

Necessary test report must be submitted by Agency.

[B] For Electrical installation up to 11 KV located in

other than normal soil i.e. Soft Rock, Marshy Soil

-Length of Pipe : 2 mtr

Providing and erecting Annealed bare Copper

wire 8 to 16 SWG.

Providing & erecting Approved make Power Saving

50 Watt Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C. 50 Hz 1200 mm

21 sweep complete having 3blades with aluminium 7.00 1948.29 Ea

blades with , canopy & 30 cm. down rod erected

with earthing.(Make shall be approved by Engineer in

Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leakage and earthing.

Supplying & erecting fan hook box of 10 mm

M.S. round bar bounded to the RCC bars up to 50mm

length each side and pierced through a

16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with

necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet

to cover the fan hook or Fan box.

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than

0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED LED driver efficiency >

85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional

Supplying and erecting led lamps with following

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

26 protection,Polycarbonate diffuser, mounting suitable 3.00 112.11 Ea

for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED

Lamps integral type, with PC diffuser suitable LAMP

holder (ii) 5 to 8 watts

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure

die cast aluminium housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

27 efficacy> 100 lumens/watt . LED driver efficiency > 85 4.00 2201.80 Ea

%.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral

and ,Light must have 440VAC line supply with over-

voltage protection.

(iii) above 24 to 36 watts cat - III

Supplying and erecting Street light pole bracket

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I. sleeve

tubing of approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having nuts

and bolts for fixing the brackets and having spread of

28 0.5 mtr. Length with 110 deg.with vertical plane and 4.00 491.87 Ea

suitable welded stiffener reducer and nipple with

check nut complete painted with one coat.of Red

oxide / PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms.[A] Single

Arm bracket 0.5 Mtr

Supplying and erecting Flexible PVC insulated multi

strand multi core 1.1 kv grade ISI marked copper wires

29 of following size to be erected as directed.(e) 1.50 50.00 44.44 Mtr.

Sq.mm 3 core round PVC sheathed

Supplying & erecting approved make low noise

decorative exhaust fan having square frame ABS body

with inbuilt lowers & square frame. 250mm with

Supplying & erecting carbon dioxide (CO2) fire

extinguisher user of following capacity with necessary

31 clamps made from 50 x 6 mm M.S. Flat with nut & 1.00 6591.26 Ea.

bolts grouted in wall complete.

[A] For 4.5 Kg Capacity

Supplying & erecting ABC powder type 'Ceasefire' type

32 Fire extinguisher as per IS 13849 or 1 Kg capacity with 5.00 848.40 Ea.

necessary clamp for erection on wall

Total Electrical Works Rs.