PROVISION OF TILING WINDOW FITMENT AND MISCELLANEOUS BR AND EM WORK AT VARIOUS PLACES OF CGDHQ - 15 OKHA UNDER GE (I) CG PORBANDAR

Amount

SCHEDULE 'A' B/R ITEMS

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing tiles and rubbish off the premises, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in leveling course, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for double charged vitrified ceramic tiles with light shade 10mm thick Square or Rectangular polished area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bedding in cement mortar 1:4, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for double charged vitrified ceramic tiles with light shade 10mm thick Square or Rectangular polished area of each tiles vertical surfaces exceeding 0.42 Sqm but not exceeding 1.00 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 10mm thick backing coat in cement mortar 1:4, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 15mm thick quartz stone slab fixed over 10mm thick cement mortar 1:4, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Hard Drawn Aluminium sliding window of Domal Section, fitted with 4 track window frame, and shutter with 4mm thick ordinary sheet glass with solar control film and aluminium xpm wire mesh of suitable aperature, 10mm round bar as guard bars fitted with nuts at both ends and covered with stainless steel pipes, including rubber neoprene, gasket, handle and locking arrangments, Complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment on wall surfaces, Complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment on ceiling surfaces, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 3mm thick wall care putty on wall surfaces in any layers and make even and smooth, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 3mm thick wall care putty on ceiling surfaces in any layers and make even and smooth, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of new or old surfaces and applying two coats of oil bound distemper on wall surfaces over a coat of primer, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of new or old surfaces and applying two coats of oil bound distemper on ceiling surfaces over a coat of primer, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for preparation of newly plastered/old/scraped surfaces and applying two or more coats of 100% Premium Acrylic emulusion paint having VOC 50gm/litre and UV resistance as per IS 15489 : 2004, Alkali and Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with Silicon Aditives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Stainless steel fancy type glass door handle 250mm long, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Stainless steel turn knob lock for 8 to 12 mm thick sheet glass, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Heavy duty suitable for more than 120.00 Kg double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including cutting of floor and making good in Cement Mortar 1 : 3, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for 12mm thick toughened one way sheet glass exceeding 0.50 Sqm in each pane in required sizes, secured in aluminium frame with rubber gasket, joined / sealed with silicon, Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., Complete all as specified and directed by Engineer-in-Charge.

SCHEDULE 'A' E/M ITEMS

Material & Labour for Point wiring complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty casing caping (minimum 20mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc., fixed concealed/ recessed in wall or ceiling etc including 1.5 Sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, switch sockets, fan regulators with required modules all as specified etc for:- Note: Cost of Making Good of existing disturbed surface deemed to be included in unit rate.

One light point or one fan point controlled by one switch with cables 1.5 Sqmm size

One 3 pin socket outlet 6 Amps on the independent, with cables 1.5 Sqmm size

One 3 pin socket outlet 6 Amps on the same board with other switches, with cables 1.5 Sqmm size

Supply & Fixing modular type 6 Amps one-way switch, 1 module, Complete all as specified and directed by Engineer-in-Charge.

Supply & fixing modular socket, 6 Amps, 2/3 pin combind 2 module, Complete all as specified and directed by Engineer-in-Charge.

Supply & fixing for modular socket, 6/16 Amps, 2/3 pin combind 2 module, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing for modular type 16 Amps one way switch, 1 module, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing ceiling rose, surface bakelite, 65x17 mm three terminals, Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing surface mounted LED batten fitting 18/20 Watt, with driver complete all as specified and directed including connecting cable from ceiling rose to terminal block of luminaire, Complete all as specified and directed by Engineer-in-Charge. Make: Philips / Wipro / Osram

Supply & Fixing MCB (DB) SPN 8 way double door 415 V made of sheet metal enclosure for MCB's as incomming and SPN/SP MCB, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing MCB SPN pole 240 volt C curve 10 KA,ISI marked as per IS/IEC 60898-1 2002 of 40/63 Amps capacity IP 20, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing MCB SP 240 volt C curve 10 KA, ISI marked as per IS/IEC 60898-1 2002 of 6/32 Amps capacity IP 20, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing MCB (DB) TPN 4 way double door 415V made of sheet metal enclosure for MCB's as incoming and SPN/SP MCB as outgoing, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing MCB TPN pole 240V C curve 10KA, ISI marked as per IS/IEC 60898-1 2002 of 40/63 Amps capacity IP-20, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Rigid non-metallic PVC conduit/casing caping 20mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., Complete all as specified and directed by Engineer-in-Charge.

Material & Labour for submain wiring in existing surface/ Wall using IS:694- 1990 marked 1.1 kV grade single core HR-FR flexible cable having multi-drawn thin strands of electrolytic copper conductors and insulation for phase & neutral and earth continuity conductor connecting to earth dolly, drawn in medium grade non-metallic PVC conduit not less than 25mm dia., colour-coded and making good of disturbed surfaces of wall/ceiling/floor complete all as specified and directed. [NOTE: 02 runs of phase & neutral conductors, 01 run of earth continuity conductor and 01 run of concealed conduit shall be measured as one length.]

2 x 2.5 Sqmm + 1 x 2.5 Sqmm

2 x 4 Sqmm + 1 x 4 Sqmm

2 x 6 Sqmm + 1 x 6 Sqmm

Supply & fixing in Wall mounted fans complete with blades, and accessories, 1 Phase, 230 V, 50 Hz, AC, 450 mm sweep, including Nut Bolt,Clamp, Complete all as specified and directed by Engineer-in-Charge. Make: Bajaj/Havells/khaitan/ Crompton

Supplying and fixing smart three phase four wire dual source prepaid energy meters BIS 15884 marked in existing meter board / floor panels with pre payment capacity touch keypad based digital having current range 10-60 Amp 415 Volt accuracy class 1.0 alongwith parallel home display split unit with inbuilt load control switch containing provision for TOD and RTC, inbuilt feature to sense the DG mode through PLSI, dual source registration wrt grid as well as DG supply and dynamic load allocation facility from grid and DG, capable to define for tariff slabs, happy hours and holiday definition. with transparent hinge type polycarbonate box, Complete all as specified and directed by Engineer-in-Charge.

Supply & fixing modular MCB/starter, 25/32 Amps, 2 module, Complete all as specified and directed by Engineer-in-Charge. Make :- Legrand/ Schneider / Hager

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 4 star rating and EER 3.2.of capacity 2.0 TR, Complete all as specified and directed by Engineer-in-Charge. Make : Voltas/Blue Star/Hitachi/Carrier

Supply and fixing Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 90V-300V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4.0 KVA, Complete all as specified and directed by Engineer-in-Charge.

Supply, laying, Jointing and testing XLPE insulated, Extruded PVC outer sheath and inner sheath, galvanised steel armoured cable of 50 Sqmm 3.5 core of size with aluminium conductor suitable for rated voltage of 1100 Volts grade and laid in trenches/pipe / ducts or on pole, Complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 Metre wide and not exceeding 1.5 Metre in depth and getting out Soft/ Loose soil, Complete all as specified and directed by Engineer-in-Charge.

Returning filling in including spreading levelling watering and well Ramming in layers not exceeding 25 cm thick, Complete all as specified and directed by Engineer-in-Charge.

Removing excavated material not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point, Complete all as specified and directed by Engineer-in-Charge.

Supply and laying double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 ( Part I and II) for protection of underground calbes of size 77/63 mm Inner dia with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection, Complete all as specified and directed by Engineer-in-Charge. NOTE:- Excavation and earth work shall be measured and paid separately under respective items. Make: Rex/Poly/Gemini

Supply and fixing double wall corrugated (DWC) high density polythene pipe coupler having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 ( Part I and II) for protection of underground calbes of size 77/63 mm with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection, Complete all as specified and directed by Engineer-in-Charge. Make: Rex/Poly/Gemini

JAY BHARAT METAL SUPPLIERS

V D JADEJA

roxy enterprise

K K Construction Co

Harsh Infrastructure

AKANKSHA CONSTRUCTION