REPAIR TO GATES, FENCING, RETAINING WALL AND FOOTPATH/ KERBS UNDER GE VARSHA VISAKHAPATNAM

M&L for Cement concrete type D-2, 1:4:8(40 mm graded stone aggregate) in foundations,filling and mass concrete complete.

M&L for reinforced cement concrete Nominal mix Type B1 1:1:2 (20 mm graded aggregate) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses , complete all as specified and as directed.

M&L for reinforced cement concrete Nominal mix Type B1 1:1:2 (20 mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete.

Formwork to sides of pillars,posts, struts, piers, columns and stanchions rough finished surface of concrete (square, rectangular or polygonal) complete.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete the work all as specified and as directed by Eng-In-Charge

M&L for Mild steel TMT bars 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete the work all as specified and as directed by Eng-In-Charge

S&F for Framed work with ornamental and intricate design of gate such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including rendering layer of mortar 10 mm thick on fair faces of brick or concrete work surfaces using cement mortar 1:4 for laying floor finishes complete.

M & L for cleaning of area drainage by removing covering slabs of any description, position & thickness, removing material i.e, soil, vegetation, shrubs of any on top of cover slab Removing of deposited clay, silt, soil, debris, leaves and similar material in the drain and make the drain functional and disposal of same upto a lead of 1500m and place the cover slab of same complete all as specified and directed.