Improvement work by replacement of floor tiles, Door and white washing , Colour washing to Control room in Keeraisathu 33/11 KV SS

Dismantling the flooring tiles and cleaning the debris up to 5 km away from EB complex including the cost of all materials labour , lead,lift,T&P etc., complete

Dismantling the Plain cement concrete and cleaning the debris up to 5 km away from EB complex including the cost of all materials labour , lead,lift,T&P etc., complete

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal over flooring concrete including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement.

Flooring with Vitrified tiles 0.6 x 0.6m of approved Quality, design & colour laid in cement mortar 1:3 - 20mm thick over concrete with p.c.c 1:4:8 100 mm thick including pointing with same coloured cement finishing the joints, including cost of all materials, labour, lead, lift, etc. complete.

Supplying and fabrication and placing in position MS/ RTS steel reinforcement for RCC works including labour for curing , bending, tying and fixing in position including cost of all materials, lead, lift, binding wire etc., complete.

White washing one coat using white cement for ceiling and including cost of all materials labour charges , lead , lift , scrapping etc., complete as directed by Engineer at site .

Colour washing two coats inside side walls by using interior emulsion paint approved quality with suitable colour including cost of all materials, labour, lead, lift, curing etc., complete.

Colour washing two coats out side walls by using Exterior emulsion paint approved quality with suitable colour including cost of all materials, labour, lead, lift, curing etc., complete.

Supplying, fabricating and fixing in position of Aluminium Anodised natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Aluminium Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Aluminium Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consumption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums,Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Aluminium surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868/1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.

Finishing the top of roof with one course of machine Cool Roof tiles of size 300mm x 300mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers