PROVN OF OTM ACCN (OR LIVING) AGAINST DEMOLITION OF EXISTING STRUCTURALLY WEAK OLD VINTAGE OTM ACCN BLDG NO P-195 AND P-196 AT MIL STN DHRANGADHRA

Amount

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage (+ or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 26(R)

Lump sum price worked out by the contractor for "SITE CLEARANCE & DEVELOPMENT " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 28(R)

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 29

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 31(R)

Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT & HARDSTANDING" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 33

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 35(R)

Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 36(R)

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 37

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 38

Lump sum price worked out by the contractor for "DEMOLITION OF BLDGS (B/R & E/M)" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 39

Sch 'A' PART-XI (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.

INTERNAL WATER SUPPLY S&F of 15 mm bore CP brass bib cock screwed for iron pipe of ferrule and fixed complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C'.

S&F of 15 mm bore CP brass angular stop cock screwed for iron pipe of ferrule and fixed complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C'.

S&F of CP wall mixer 3 in 1 system including 1.5 m long tele shower and overhead shower of size 150x150 mm with W.F. ISI marked complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C'.

S& F overhead shower 100mm dia of ABS body crome plated with gray face plate with arm having swivel joint chromium plated complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C'.

S&F jet spray system chromium plated steel body with flexible pipe complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C'.

S&F two way angle cock chromium plated fancy type 15 mm bore complete all as specified and directed. Make - Jaquar QUEEN SERIES or technocommercial equivalent makes as per Appx 'C'.

INTERNAL ELECTRIFICATION S&F decorative box type LED tube light fitting 1x20 watt including LED tubular lamp with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed. Make: Cat part no- LTT8-20 for LED tube and DMLN1LT8-16 for batten of crompton or technocommercial equivalent makes as per Appx 'C'.

S&F heavy duty, exhaust fans of 250 mm sweep suitable for SP 230/250 v 50 Hz AC supply complete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed. Make: VENTILUS of Crompton or technocommercial equivalent makes as per Appx 'C'.

S&F ceiling fans 1200mm sweep energy efficient five star rated incl down rods and connecting up with 3 runs of 1.5 sq mm, single core PVC insulated but unsheathed, FRLS cable with multistranded copper conductors IS 694 marked, from ceiling rose to fan complete all as specified and directed. Make: Empower50 of Crompton or technocommercial equivalent makes as per Appx 'C'.

S&F of MCBs / MCCBs, of following capacity, IS-8828 marked of the undermentioned type and rating and fixing in DBs (DBs catered separately in this Schedule)

MCB SP 6 to 32 Amp 10 KA rupturing capacity 240 Volts C series

MCB SPN 40 Amp 10 KA rupturing capacity 240 Volts C series

M&L for sub main wiring with two runs of 4.0 Sqmm size main cable and one run of 4.0 Sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including PVC concealed conduit pipe of dia not less than 20mm, medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ceiling complete all as specified and as directed

M&L for sub main wiring with two runs of 6.0 Sqmm sze main cable and one run of 6.0 Sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including PVC concealed conduit pipe of dia not less than 20mm, medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ceiling complete all as specified and as directed

Note for item No 22.00 & 23.00:- The above mentioned specified runs of single core main cables and specefied runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one runs length. The small extra lengths required for loops etc for connection in DBs shall deemed to be included in quoted rate and only the cable covered in conduit shall be measured.

S&F LED Security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver 5 KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT3000-6000 CRI greater than 70, input power 30 W system with 100 lumens per watt output operating voltage 160-260V with connection by three core PVC insulated multistaranded copper conductor sheathed cable of size 1.0 SQMM fixed with & copper conductor sheathed cable of size 1.0 SQMM fixed with & including bracket made of GI Pipe 25mm bore light grade, 1.2 Mtr long bent to shape required with 2 Nos MS clamps of suitable size and length, nuts & bolts complete all as specified and as directed. Cat No: LSTS-30-CDL of Crompton or technocommercial equivalent makes as per Appx 'C'.

Note for item No 24.00: (1) The LED lights shall have gurantee for 5 Years from date of completion of contaract , any defects noticed during this period shall have be rectified / Parts replaced immediately, security amount of 10% of the cost of the item shall be retained with the Deptt till end of the guarantee period. (ii) LED light manufacturer lab shall be accredited to NABL.

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia medium grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete.

NOTE FOR ITEM NO. 25.00:- Rate quoted by tenderers shall be deemed to include for following provisions:- [i] Excavation & earth work in any type of soil including removing of surplus material upto 50 Mtr. [ii] PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles. [iii] Main earthing lead from earth electrode to test point upto 7.5 mtr. [iv] Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd. [v] GI protection pipe of size 15 mm bore medium grade 7.5 mtr.

ROAD, PATH,CULVERT & HARDSTANDING M&L for 150 mm thick (compacted thickness) WMM (Wet Mix Macadam) in two layers (75mm thick each) conforming to grading given in table 400-13 & physical requirement given in table 400-12 spread by mechanical means & rolled by using 8-10 ton vibrator power roller over compacted surface of soling as specified in clause 406 3.5 of MORTH&H specification complete all as specified and directed.

S&F stud made out of aluminium alloy, Die casted, dynamic ally designed having very high impact strength and fitted with 2Nos highly reflective relectors and 2 Nos eye balls each on both side weight 537gms (approx) dimension : 110x128x29.5mm complete all as specified and directed.

M&L for preparing concrete / bituminous surfaces and painting lines, dashes (continuous/uninterrupted), arrows, letters etc exceeding 10 cm width & 2mm thick with hot applied thermo plastic road marking materials not less than 5 Kg per 10 Sqm all as specified in clause 803.4 of MORTH&H Specification, white or golden yellow (IS colour No. 356) over a coat of primer using road painting machine complete all as specified and directed.

SEWAGE DISPOSAL Removal of blockage/chock up obstructing the flow in sewage line by rodding with rods/wooden kempti/chock remover and making the continuous flow between two manholes for 200mm bore of pipe complete all as specified and directed. Note:- The clear distance between two manholes shall be measured.

S&F orange colour safety foot rest of minimum 6 mm thick plastic in capsulated as per IS-10910 on 12 mm dia steel bar conforming to IS : 1786 (over all 60 cm length) complete all as specified and directed.

EXTERNAL WATER SUPPLY Supply, laying, connecting, jointing and testing ductile iron pressure pipe ISI marked to IS-8329-2000 Reaffirmed Edition 4.1 suitable for "push on joints" in standard working lengths supplied with rubber gasket / tyton joint duly ISI marked for water supply, Class K-9 with socket and with cement mortar linng inside the metalic zinc coating with finishing layer of bituminious paint on outside the pipe without polythelene sleeves but including "push on joints" supplied with ISI marked EPDM rubber gasket conforming to IS-5382-1985 (Reaffirmed-2003) with dual hardness of type 2 (bulb) and type-5 (Heel) quality laid in tenches complete all as specified & directed of the following sizes :-

100 mm dia

80 mm dia

S&F cast iron sluice valve 100 mm dia (flanged ends) of class 1.6 PN with iron wheel, stainless steel brass spindle and check nut confirming to IS :780 including all jointing materials such as nut, bolts, washers and gaskets etc complte all as specified and directed.

M&L for Construction of valve chamber of size 900 mm X 900 mm X 1000 mm (internal dimensions) with PCC foundation 1:4:8 type D-2 using 40 mm graded stone aggregate,150 mm thick & 150 mm wide offsets all around, 200 mm thick PCC solid block masonary walls built in CM 1:6, 75 mm thick PCC 1:2:4 Type B-1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, without using extra cement internally including top of floor including excavation earth work in any type of soil, 3.0 mm thick MS sheet cover fixed on 50 mm X 50 mm X 5 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.

M&L for Construction of valve chamber of size 1050 mm X 1050 mm X 1000 mm (internal dimensions) with PCC foundation 1:4:8 type D-2 using 40 mm graded stone aggregate,150 mm thick & 150 mm wide offsets all around, 200 mm thick PCC solid block masonary walls built in CM 1:6, 75 mm thick PCC 1:2:4 Type B-1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, without using extra cement internally including top of floor including excavation earth work in any type of soil, 3.0 mm thick MS sheet cover fixed on 50 mm X 50 mm X 5 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.

ARBORICULTURE Supply and ploughing the following species of well grown (two year grown) healthy tree sapling with good root system & height as mentioned below and M&L, excavating a pit of size (450mm x 450mm x 450mm) pit, refilling with sweet earth mixed with manure in the ratio of 3:1 by volume in addition 2 Kg of neem khali/cake, cowdung including watering and spraying pesticides etc as specified. Notes:- (i) Supply only (a) vermi compost (b) sweet earth (c) insecticides and pesticides etc shall be measured and paid separately under relevant items. (ii) Security amount of 20% of the cost of the items shall be retained with the Deptt till end of the defect liability period.

Sitaphal (4 feet to 5 feet)

Bouiganvillea (4 feet to 5 feet)

Ashoka (4 feet to 5 feet)

Palm (4 feet to 5 feet of Different species types)

Mango (4 feet to 5 feet)

Guava (4 feet to 5 feet)

Cheeku (4 feet to 5 feet)

Neem (4 feet to 5 feet)

Jammun (4 feet to 5 feet)

Supply only approved vermi compost (Per 50 Kg bag) of best quality complete all as specified.

Supply and stacking of well decomposed cow dung including rayalty loading unloading transportation and stacking at site complete all as specified and as directed. Note : for the purpose of payment the stack measurement shall be reduced by 10% for voids.

Removal of masonary waste and other undesirous material and its disposal away from site complete all as specified and as directed.

Supply of good sweet earth for tree plants and for other landscaping works brought from outside MD land and including royalty and carriage for all leads complete all as specified and as directed.

Supply of following Insecticides, pesticides etc at site for store in dust/liquid form complete all as specified and as directed.

Chloropyriphos-20% EC

Neem khali in form of cake

Gypsum 50 Kg bag

DAP at site

Supply and laying/planting of green well grown healthy lawn in rows with good root system, pitching @ 150mm c/c including surface excavation, removing waste soil, laying spreading one layer (minimum 15cm) of black cotton soil mixed with sweet earth and jaivik manure including watering and spraying pesticides etc as specified including replacement of dead grass and regular maintenance till the completion of maintenance period of two year complete and minimum 3 visits per month, including watering complete all as specified and directed. Note: Security amount of 20% of the cost of the item shall be retained with the Deptt till end of the defect liability period.

S&F tree guards made of welded steel wire fabric (150x100mm) supplied and fixed complete to wood or steel members and supported with flat iron (25x6mm) fillet (for securing the mesh) and three legs in angle iron (30x30x5mm) welded to the tree guard below and inserting it into ground all as specified and directed and preparation of new surface and priming with red oxide zinc chrome and applying two coat of paint with synthetic enamel (ordinary tint) including earthwork and PCC 1:3:6 type C1 of size 0.30 x 0.30 x 0.45 m complete all as specified and directed.

Supply only 20mm dia PVC pipe hight quality for purpose of horticulture complete all as specified and directed.

Supply only rotory type sprinkler made of brass with MS stand and suitable for 20mm dia pipe complete all as specified and directed.

Regular maintenance of trees speciman plants and other similar plants till the completion of 02 years maintenance period including replacement of dead plant of same height and including watering, training, pruning, hoeing, weeding stacking insect pest management, cleaning of nearby area and disposal of waste away from site, Quarterly enrichment with manure @ 0.015cum per pit with minimum 03 visits per month complete all as specified and directed.Note : Manure shall be measured and paid separately in relevant items.

S&F Distribution board power line VTPN, 4 way 415 volts, factory made powder coated, double door with neutral and earth link including 3 pole MCCB 63 Amps rating, 16 KA breaking capacity for incoming supply and provision of MCB SP/TP for out going supply complete all as specified and directed. Note:- The Cost of MCCB TP 63 Amps 16 KA is deemed to be quoted rate.

Hi Tech Transpower Pvt Ltd

MANGLA AMIT BUILDERS PVT LTD

SHREE GURUKRUPA CONSTRUCTION CO.

SHRI GURMUKHDAS CONTRACTORS PVT. LTD.

RAGHUSONS INFRA ENGINEERING PVT. LTD

M/s. Shiva Engineers

SOOD ASSOCIATES PVT LTD