PROVISION OF CERTAIN MINOR WORKS AT AFS KUMBHIRGRAM

Amount

Supply and fix for anodised aluminium frame for partition, doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. Make of aluminium section – JINDAL/ INDAL/ HINDALCO

Supply and fix for aluminium door shutter, aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles (02 Nos) in each door, hinges, anodised aluminium snap beading, screws etc, complete all as specified and directed. Make : Make of aluminium section – JINDAL/ INDAL/ HINDALCO

Material and labour for 12 mm thick particle board for insulation purposes, fixed with nails/ screws to aluminium framework all as specified and directed

Supply and fix for 5.50 mm thick sheet glass ordinary quality and glazing with oil putty/ wooden beading in square exc 0.5 Sqm in each pane including solar control film 50 micron thick, reflective type, sticked to glass panes as per manufacturer’s instruction, complete all as specified and directed. Make : MODI/ SAINT GOBAIN/ ATUL/ TRIVENI

Supply and fix Alumunum powder coated, barrel tower bolt 150mm long complete all as specified and directed.

Supply and fix 150 mm Aluminium handles, cast type, anodised complete all as specified and directed

Supply and fix for mortice lock, brass, 4 levers type, size 100mm complete all as specified and as directed.

Supply and fix for floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor but of brass body and tongue with hard drawn steel spring (Overall length of cover plate 140mm) fixed in repairs etc complete all as specified and directed.

Supply and fix for Aluminium Die cast body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed

Material and labour for Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed..

Material and labour for Plain Cement concrete 1:3:6 type C2 using 20 mm aggregate as in foundations,filling and mass concrete complete all as specified and directed.

Material and labour for brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down tarfelt with tiles and cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50 m and n. exc. 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust complete all as directed.

15 mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane, finished even and smooth without using extra cement complete all as specified and directed. (NOTE : Polymeric membrane shall be measured and paid separately under relevant item ).

PCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions, finished even and smooth on exposed concrete surface without using extra cement complete all as specified and directed. (Note: Water proofing compound shall be measured and paid perarately under relevant item as supply only).

Supply only integral water proofing compound conforming to IS:2645-1975\, complete all as specified and directed.

Material and labour for 25mm thick PCC type B-0, 1:2:4 (12.5mm graded aggregate) in ground floors complete all as specified and directed

Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.

Supply and fix anodised aluminium snap grid frame (with minimum 15 micron uniform anodic coating) size 605x605mm consisting of Tee/angle section, size 40x40x2mm as approved make confirming to IS - 733 in frames of false ceiling including aluminium cleats with necessary screws. Aluminium perimeter angles fixed to wall/wooden frame at centre fixed to steel trussd roof complete all as specified and directed.

Material and labour for Non Asbestos fibre cement building boards 4mm thick fixed or laid in aluminium frame work with screws as in ceiling complete all as specified and directed.

Material and labour Framed work such as grills, gratings, etc. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts etc complete all as specified and directed.

Supply and fix Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to woo trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 (S &F)

Supply and fix for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe410-W (Gde-E-250) quality A

Material and labour for preparation of old decorated plastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including cornices and pilasters etc and applying one coat of oil emulsion distemper complete all as specified and directed.

Material and labour for preparation of old decorated plastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including cornices and pilasters etc and applying one coat of white wash complete all as specified and directed.

Supply and fix thickness of insulated PVC wall lining 25mm Insulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing,PVC strips, etc complete wall panelling all as specified and directed by Engineer- in Charge.

Material and labour for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard/dense soil all as directed and specified.

Material and labour for Plain Cement concrete 1:3:6 type C2 using 40mm aggregate as in foundations ,filling and mass concrete complete all as specified and as directed.

Material and labour Cement Concrete(1:2:4) type B2 using 40mm grade stone aggragete in foundation for tubular post and in flooring including necessary form work, complete all as specified and directed. complete all as specified and as directed.

Material and labour for cement concrete 40mm thick type B1 1:2:4 at top surface using 20mm graded aggregates, complete all as specified and directed

Supply and fix steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St- 240 all as specified and directed.

Supply and fix for MS Plates (plain or chequered) Fe- 290 (Gde E- 165) quality-A channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and as directed.

Supply and fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm and n exc 10cm, (dia of neck 11 to 15mm) all as specified and directed.

Supply and fix Roof trusses (framed), Fe- 290 (Gde E- 165) quality-A trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc all as specified and directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described all as specified and directed.

Supply and fix pre- painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified & directed

Material and labour for plain cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in surface channel/drain, complerte all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms moulds, mitred/stopped ends etc complete all as specified and as directed.

Material and labour for brick work with sub class 'B' old size bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as directed.

Material and labour for 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm and 5mm thick) finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered or unplastered surface of wall and applying two coats of OBD, complete all as specified and as directed.

Demolition of concrete (Un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for PCC 1:2:4 type B1 using 20mm graded crushed stone agg as in benching, coping for drain, etc including necessary form work, complete all as specified and directed.

Material and labour for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brick work with (CM 1:4) complete all as specified and as directed.

Supply and fix Low level PVC valveless, syphonic action type flushing cistern white, with inlet, ball valve, float and handle including bracket connenction pipe complete

Supply and fixing Tubes, medium grade, 20mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

Supply and fixing Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

Supply and fix WHB vitreous china white 550mmx400 mm (flat back or angle back type) including cutting for and pinning in end of the new brackets with 32 mm bore CP waste coupling fixed complete all as specified and as directed.

Supply and Fixed Waste coupling PTMT/CP chromimum plated 32mm dia, for wash hand basins etc with long screw shankSupply and fixly nuts, plain end, bedded in red lead cement and other end fixed complete all as specified and as directed.

Supply and fix PVC (SWR) pipe 110 mm bore in any length with rubber joints , Ilaid in trenches or in floors all as directed.

Supply and fix PVC (SWR) bend any radious 110 mm bore with access door. complete all as directed.

Supply and fix in repair Bib taps, cast copper alloy,CP with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm bore of pipe brass ferrule but fancy type complete all as specified and as directed.

Supply and fix 15mm dia, stop valve cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe or for unions fixed in repair.

Supply and fix Non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match all as specified and directed

Material and labour for screed bed or bedding layer of mortar 15mm thick for laying floor tiles with CM 1:6 Complete all as specified.

Material and labour for glazed ceramic coloured tiles size (300 x 200 x 7 mm ) on vertical surfaces like skirting / dados, set jointed in cement slurry and pointed with white cement and pigment complete all as specified and as directed.

Material and labour for rendering 10 mm thick with (CM 1:3) for fixing wall tiles on skirting /dados complete all as directed.

Material and Labour for applying Two or more coats of 100% Premium acrylic mulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Material and labour for complete removal of existing treatment on walls including brooming down, applying two coats of oil emulsion distemper over and inlucing one coat of primer complete all as specified and directed.

M/S RAKHAL KANTI NAG (BID ID -3414825)

DEE AAR TRADING (BID ID -3415866)

M/S ANITA ROY and SONS (BID ID -3415857)

M/S P K ROY AND SONS (BID ID -3414910)

M/S NIRANJAN ROY (BID ID -3414794)

Bhuiya Construction (BID ID -3416027)