NBDD/BS/SE /NIQ-29(2nd Call)- (EL) of 2019-2020

Amount

Supply, installation, testing & commissioning of cubicle type wall/floor mounted indoor type dust and vermin proof powder painted Sub Panel board having fixed with front side double door with railway type locking arrangement suitable 415V 3 phase, 4 wire 50 Hz AC supply made out of 2 mm thick MS sheet so as to accommodate the following mountings complete with Al bus bar of 63 Amp capacity & channel base at the bottom connection & interconnection by copper wire along with necessary nuts & bolts complete as reqd. (Make-HAVELLS/L&T/LEGRAND/C&S make). 125A 415 Volt TPN SFU with 3 nos HRC FUSE-1 63A 415 Volt TPN SFU with 3 nos HRC FUSE-3 32A 250 Volt DP MCB -2 125 A 415 V Change Over switch-1 125 A Capacity 415 Volt 4 bar AL busbar of bars size 25mmX5mmX1mtr -1 0-150 Amp Digital Ammeter-1 250/5 A CT -3 0-500 digital Voltmer-1 LED Indicating Lamp -3 Caution board-1

Supplying and fixing double door 6 way TPN MCB Distribution board with IP-42/43 protectionwith 1 No. 63 A FP MCB as incomer and 18 nos. 6-32 A SP MCB as outgoing complete , concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with following MCBs & MCB Isolator.(Approved make of EIC)

S & F 2+12 way double door IP-43 SPN MCB distribution board with 1 No. 40 A DP MCB as incomer and 10 no 6-32 A SP MCB as outgoing complete with Din Rail, Earth, Neutral & Phase Bars etc. to be partially recessed in wall with earthing attachment. (Approved make of EIC)

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed] f) Avg run 12 mtr.

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC On Board.

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI/PVC Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI /PVC Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply of 250 V 300 mm. sweep,1400 rpm industrial type heavy duty (ISI)high speed exhaust fan.(Approved make of EIC)

Supply of 250 V 450 mm. sweep industrial type heavy duty (ISI)high speed exhaust fan.(Approved make of EIC)

Fixing only 300 mm dia exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection.

Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long)

Fixing on 450 mm dia exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection.

Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long)

S & F 250 V 1200 mm sweep AC ceiling fan (ISI) complete with blades, canopy, down rod etc. having fixed with 2 nos ball bearing fixing the same, painting of down rod, connection by supplying 3×1.5 sq. mm stranded copper wire. (Approved make of EIC)

Supply and fixing 3/4"MS down rod For fixing the Ceiling Fan with all accessories.

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991)

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Supply of 240V LED tube light mounting rail lighting luminaire to be fixed on ceiling for TLED lamp with necessary connection and earthing attachment . (Approved make of EIC)

Supply of 240V LED tube light mounting rail lighting luminaire to be fixed on ceiling for TLED lamp with necessary connection and earthing attachment . (Approved make of EIC)

Fixing only Single/twinfluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length.

Supply of recess mounted 18 watt LED down lighters which range is a breakthrough technology and reliable heat management to deliver a long lasting efficient solution .(Approved make of EIC)

Supply of LED Bulkhead that fits in vartiety of applications and serves as simple energy efficient alternative to CFL/incandescent bulkhead luminaires. (Approved make of EIC)

Supply of Decorative wall light .(Approved make of EIC)

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.(for toilet block) with 10 W LED lamp.(Approved make of EIC)

Fixing only bulk head /ceiling fitting on wall /ceiling by screws etc.

S & F attractive wall mounting bracket fan 240 V 400 mm sweep 1400 rpm having fixed with close mesh guard , pull chain arrangement for speed control and sturd and heavy duty blades for higher displacement of air (Approved make of EIC)

Supply & fixing 60W LED flood light fitting with IP66 protection (Approved make of EIC)

Supplying and fixing 19 mm dia and 3 mm thick polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction)

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene pipe by the GI fish wire and making necy. connection as required. as per instruction of EIC. a) 4×10 sq.mm. + 2×6 sq.mm.

b)-do- 2×10 sq.mm. + 1×6 sq.mm.

c)-do-2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

d)-do- 3 x 22/0.3 (3x1.5 sqmm)

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 200x50x1.25mm (18SWG)

300x50x1.25mm (18SWG)

i) Earthing with 50 mm dia GI pipe (ISI-M) 3.64 mm thick × 3.04 mtr long and 1 × 4 SWG (Hot dip) wire 4 mtr long) 13 mm dia × 80 mm long GI bolts double washers incl. S & F 15 mm dia GI pipe protection (1 mtr long) to be filled with bitumen party under the ground level and partly above ground level driver to an average depth of 3.65 metre below the ground level & restoring the surface duly rammed.

S & F earth bus bar of GI (Hot Dip) MS flat of 50 mm × 6 mm on wall is having clearance of 8 mm from wall including providing drilled holes on the bus bar complete with GI bolts, nuts, washers spacing insulators tc. As required.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe including Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Supply 1.1 KV grade PVC Armoured XLPE insulated AL conductor cable . i) 3.5 core X 50 sq.mm. (Approved make of EIC)

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

S & F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture -proof entry of XLPE/PVC armoured cables as bellow. i) 3.5 core X 50 sq.mm.

Finishing the end of following XLPE/PVC armoured cable by crimping method incl.S & F solderless socket (Dowels make,) tapes,anticorrosive paste & joining materials. i) 3.5 core X 50 sq.mm.

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

Installation of security light: Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

Supply of 1.1 KV grade PVC /A aluminium conductor2 core X 10 sq.mm (Approved make of EIC)

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

S & F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture -proof entry of XLPE/PVC armoured cables as bellow. i)2 core X 10 sq.mm.

Finishing the end of following XLPE/PVC armoured cable by crimping method incl.S & F solderless socket (Dowels make,) tapes,anticorrosive paste & joining materials. i) 2 core X 10 sq.mm.

Supply & laying of 3 X 2.50 sq. mm PVC insulated copper conductor FR wire from loop box to fittings in 15 mm dia polythene pipe including connection as required.

Supplying and fixing 4 WAY MCB SS enclosure with IP-20/30 protection, powder coated including 2 NOS 6-32A two pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment

Fixing only Floodlight/LED Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.

Supply of LED Street light luminaire with high power LED .(Approved make of EIC)

Supply for fitting of 11 Watt & 2000 Lumen All In One Solar LED Street Light Luminaires having polycrystalline solar cell with 12V solar panel module capacity. Detailed technical specifications given below: System wattage should not be more than 11 Watt (+/- 5%), system lumen output should not be less than 2000 lumens, system efficacy should not be less than 175 lumens/ watt, CRI - 70 (+/- 5%), CCT - 5700K (+/- 5%), UV stabilized polycarbonate cover should be used for better light distribution, LiFePo4 battery should be used with battery capacity >170Wh, integrated MPPT charger with driver, luminaire should have in-built PIR sensor, fixture tilt angle should be 0 - 15 deg. adjustable, input voltage - 12V DC to 14V DC, LED burning hours should be >50000 Hrs.@L70, luminaire should have charging & discharging LED indicator and aluminium PDC housing should be provided in luminaire. Warranty - 3-years warranty against manufacturing defects from date of supply. (Approved make of EIC)

SIGNBOARD: Supply & lnstallation of 6" depth box type M,S. structure duly fabricated &.welded by 40 mm x 40 mm M.S. square pipe 3 mm thick lSI mark frame with back side & four sides covered by 24SWG MS sheet including Aluminium channel and fixing arrangement without ACP sheet includiug painting,. slze :20' x 6.5' to be made such a manner that it can be opened towards up direction for taking maintenance.

S&F 4mm thick white ACP sheet on MS structure. Size 20 ftX 6.5 ft

Supply & fixing of special type imported acrylic letter 1017 mm height fixed on ACP sheet.The letter front( Bengali bold) letter colour- Blue

Supply & fixing of LED inside the acrylic letters. the specification of lED is given below; a) LED white samsung (Korea) module. ( 3 nos. LED in a module) b) type:double line fixed. c) Life:70,000 burning hours. d) Intensity- same & smooth through out no brighter or light or dark patches. e) Visibility: 50 mtr. at least for normal eye. f) Power supply: required amp (mean well LRS·< >-12) g) Ambient air 0-50 c 100% relative humidity. h) Power consumpdon: 1.08 watt per module.

S & F water proof 350 watt power supply system [P65. 50/60 Hz frequency 108 to 305 VAC power supply, >.095 power factor for LED lamp, (Approved make of EIC)

S&F 50mm X 50mm X 6mm MS angle on wall including painting for fixing of sign board.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Sinking of 128x80mm Deep Tube well by Odex-115 method: Drilling borehole by Rig machine with Odex-115 (Simultaneous driving of casing pipe) method of drilling through any kind of soil, boulder, rock etc upto the desired depth by making all necessary arrangement. a) G.L. To 50 Mtr.

b) -do- 50 Mtr. To 100 Mtrs.

Lowering and placing of filter assembly of 3 mtr length.

Exration and partening off the cassing pipe upto the required length to open the filter (approx 3 mtr length).

Development of the tube well by Air Compressor upto the satisfaction of EIC.

Supply of the following materials for the tube well:- a) 128 mm ID/139 mm OD MSERW fin cut pipe

b) 80 mm dia x 3 Mtr long HDPE/Other suitable filter.

c) Casing Shoe.

d) Packer assembly.

Supply and Installation of 3 HP Submerssible pump motor set suitable for 125 mm dia deep tube well capapable for discharging 20000 LPH of Clear water at a total head of 48 mtr having a discharging outlet of 50 mm dia .(Approved make of EIC)

supply of PVC insulated and PVC sheathed cable with Electrolytic Grade Annealed Copper conductor having 3 core 4 sqmm flate for Submersible pump motors voltage up to and including 1100V as per IS: 694:1990.

Supply, fitting, fixing 50 mm dia G.I. Pipe (ISI-M) column pipe for submersible pump lowering having 3-mtr average length including special threading in Leathe and S & F one Tata GI socket.

Supply and fixing 4" dia Pressure Gauge including nipple, valve etc with other jointing materials.

Making of brick piller of suitable size with neat cement plastering for supporting lead/plumbing line as per instruction of EIC.

S & F of 50 mm dia Non-return valve (horizontal) with jointing materials (ISI approved Zoloto make).

S & F of G.M. Peets valve including all necessary jointing materials (ISI approved) for the following size: 50 mm dia.

S&F 50 mm dia check valve bwith flanged as required

S & F suitable size of M.S. Flat clamp for holding the column pipe, pump motor in the tube well with necessary nuts, bolts, washer as per direction of EIC.

S & F of well cover suitable for tube well.

S & F 20 mm dia G.I. Pipe (Jindal-M) for protection of cable.

supply ,installation ,testing & commissioning of three phase 415 V 50 HZ ,3HP submersible pump controllers with Single phase preventer including wideband coil and relay current rang 9-14 (A) .make-L&T cat no-MR-G2/Havells or equivalent.

Supply, fabrication & installation of header assembly made of 150 mm dia 1.0 meter long black MS pipe having both side sealed with MS sheet for 1 no. 50 mm dia inlet, 3 nos. 50 mm dia and 1 no. 80 mm dia outlets short pieces to be regidly welded with 150 mm dia header including wash out line including fixing 1 no. presure guuge and 1 no. 1/2'' Fullway valve, nipple etc. The whole unit to be fixed on wall with all supporting arrangement & painting etc as per direction of EIC.

Supply & laying 50 mm dia GI pipe (Class-B) medium mainly U/G trench with all jointing materials as per direction of EIC.

S & F of G.I. Accessories (R-brand) ISI approved with all jointing materials: a) 50 mm dia Bend.

b) 50 mm dia Elbow.

c) 50 mm dia Nipple.

d) 50 mm dia Union.

e) 50 mm dia Socket (Tata make).

f) 50 mm dia Elbow, Union, Nipple, Socket etc for suction line connection.

Making connection of delivery pipe line to O.H. Tank with existing line with jum nut, nipple, washer etc. Including all jointing materials.

Collecting the sample of water for chemical & bactoriogical test and submission of Test Report with original certificate from authorised organisation.

SPARK INDIA

M/S KAMAK ENGINEERS AND CO