Providing, Supplying, Lowering, Laying, Jointing & Commissioning of Rising Main DI 750mm Dia pipeline & Pumping Machinery with all allied works from NMC to ZBC offtake at Ch.2760 m for SSW A-3 RWSS with 10 Years Operation and Maintenance

ESTIMATED COST RS.

Gujarat Water Supply & Sewerage Board

Volume-II: Price Bid

Bid Documents for Design, Build & Operate Contract for

BREAK UP FOR INTERIM PAYMENTS………………………………………………….

Volume-II: Price Bid

Name of work:- Providing, Supplying, Lowering, Laying, Jointing &

Commissioning of Rising Main DI 750mm Dia pipeline & Pumping

Machinery with all allied works from NMC to ZBC offtake

@Ch.2760m for SSW A-3 RWSS with 10 Years Operation &

The bidder shall quote his firm and fixed price for the entire work under this Contract, defined in

more details in various sections of this bid document.

1. The rates and prices shall be submitted in the electronic formats given by n-procure which is

called Schedule-B, rates and prices received in any other formats will be rejected and the Bids will

be disqualified.

2. It will be entirely at the discretion of the Employer to accept or reject the bidder’s proposal,

without giving any reasons whatsoever and the bidder shall not be permitted to withdraw his bid

on this account.

from the by client.

4. In Schedule-B the Bidder shall quote prices for the items on Percentage rate of overall

work/lumpsum / unit rate as called for against the BOQ item.

will be considered for price evaluation & shall form a part of the Contract Agreement.

shall be carried forward to Schedule-B for comparison and evaluation.

7. The Bidder shall quote his prices for Operation & Maintenance in Schedule-B. Bidder shall give

year wise break up of cost for 10 years O&M in Schedule-B The total shall be in line to the price

quoted in Schedule-B. The total shall be carried forward to Schedule-B for comparison and

8. Wherever for a particular item the quantities have been specified payment shall be on unit rate

basis and unit variation in quantity will be paid with pro rata basis.

9. Each item is to be individually priced online and the amounts shall be added up to arrive at the

where the item description requires the item to be priced on "as applicable” basis. The item shall

not be priced if it is “not applicable” to the bidder’s design, in which case the bidder shall add the

words “NOT APPLICABLE”. The wording in the item description is for subject matter guidance

only; clause references are indicative only and all other relevant clauses shall also be referred to.

The prices shall allow for all the works covered under the bid and all liabilities and contractual

obligations whether separately specified or not. Items against which no prices are quoted shall not

be separately paid for and the bidder shall be deemed to have covered the cost of execution of such

items (according to the requirements of the bid document) in the prices quoted for other items.

working/safety of the system as specified, will not be separately paid for by the Employer when

executed and shall be deemed to be already covered by other items and rates listed in the price

sheets No extra payment shall be given for any item which is required to complete and perform

Volume-II: Price Bid

arithmetic corrections if any will be considered for financial evaluation of the bid.

12. Schedule ‘D gives the basis of interim payment for construction of civil works.

13. The bidder shall be deemed to have allowed in his price for provision, maintenance and final removal

of all temporary works of whatsoever nature required for construction including temporary bunds,

diverting water, pumping, de-watering etc. for the proper execution of works. The rates shall also be

deemed to include any works and setting out that may be required to be carried out for laying out of all

the works involved.

14. Prices shall be filled online only.

and other sections of these bid documents and these documents are to be taken as mutually explanatory

of one another.

16. The bidder shall interpret the data furnished and carry out any additional survey work, or investigation

work required at his own cost.

17. The prices quoted shall also include the cost of materials utilized for testing.

18. The bidder should acquaint himself with the site conditions including the access to Work site. The

successful bidder shall have to make suitable access to work sites at his own cost. These accesses will

be used by the other contractors working for GWSSB.

all the equipment / materials / accessories and services required as per the specifications. The bidder

20. The amount to be quoted for O & M / year shall be as per Volume-IB, General Conditions of Contract,

Clause No. 1, Security Deposit.

21. 1% of the value of work will be deducted from the Running bill against labour cess which is non

22. Third Party Inspection / CSC agency will be deployed by GWSSB and charges of the same will be

borne by GWSSB.

23. Any expenditure incurred by inspection/ CSC agency for the work misinformed by the contractor and

charges of inspection/ CSC agency without any work due to misinformation shall be recovered from

the contractor.

24. The prices shall be quoted inclusive of all taxes, royalties and duties prevailing at the time of submission

of the bids. Statutory variation if any during the currency of contract shall have to borne by the agency

which shall be not reimbursed by the GWSSB.

25. The rates should be quoted exclusive of GST but inclusive of all other taxes as per Volume- I(B),

General Conditions of Contract, Clause No.

26. The Bidders shall have to quote the rates in this tender keeping in view of the Probable rebate available

to them as per the above Circulars of Government of India. The liability of the Department is limited to

issuing the Project Authority Certificate to the Contractor and the

Volume-II: Price Bid

Department does not take any responsibility whether the Agency gets the Excise Exemption or not. The

Complete responsibility rests with the Contractor/Agency only.

27. The process requires that the bidder shall quote his price for the work components contained in the price

schedules for the entire work. Such prices shall remain firm and fix during the entire period of

performance of the contract except price variation allowed for supply of MS/DI/PVC/HDPE pipe as

per Volume-II(A), General Conditions of Contract.

28. Payment shall be made for the components for which lump sump prices are quoted, as per the schedule

of payment. Total cost will be worked out on the basis of work done of individual items and rates quoted

against those particular items only.

29. Royalties: The contractor shall be liable to pay the royalty of the quarried materials/ minerals used in

the construction of works at the rates specified in the Narmada Water Resources, Water Supply &

Kalpsar Dept. Resolution No. GEN-2010-595- (6)- M.I.Cell ( K-1) Dt. 29-4- 2011 ( Gujarati Version

Copy enclosed) and shall be recovered from the running bills of the work from time to time and

remaining amount if any shall be recovered from the final bill before releasing the security deposit of

the work. The contractor shall furnish the statement showing the quantity of quarried materials /

minerals from whom purchased ( with full address of the seller) and copies of the bills for purchase to

the Executive Engineer of the in charge of the work. The contractor shall also furnished such

additional information as regards royalty payment to the competent authority.

30. Agency shall have to take Insurance policy and intimate to GWSSB along with the evidence within

time limit. In case of non compliance entire responsibility shall be rest with the agency and required

amount shall be recovered from any due amount of the agency.

31. GWSSB can recover penalty amount from the agency for not taking the insurance. Though the penalty

amount is recovered, responsibility of the agency for taking insurance shall be continued and will not

be escaped from the responsibility.

32. The contractor shall apply fair means of stock maintenance and shall adopt accounting standard as may

be prescribed under GST Act as applicable in the state of Gujarat. For arriving at the difference in

procurement prices due to introduction of GST it will be open for the Board to ask for original invoices,

lorry receipt, weigh bridge slips, payment details and such other documents as may be required for the

The claim of contractor regarding GST shall have to be backed by documentary evidence substantiating

the actual payment of tax duly certified by the competent tax authority. The final decision regarding

the quantum of claim amount to be recovered or reimbursed shall be of the competent authority of the

GWSSB and shall be binding on the contractor.

Signature of the contractor Executive Engineer Deputy Executive Engineer

P.H.W. Division P.H.S. Sub Division

Ahmedabad Viramgam

Volume-II: Price Bid

2. BID FORM (WITH PRICE)

Bidders are required to fill up all the blank spaces in this Bid Form.

1. Having visited the site and examined the Bid Documents, Drawings, Conditions of Contract,

Addenda/Amendments to the above, for the execution of the above Contract, we the undersigned

offer to Design, Engineer, Procure, Construct, Complete, Commission, operate, maintain and Run

the whole of the said works for ....................................................................... Months from the date of

commissioning including defects liability period as given in Conditions of Contract and in

numbers) for Lump sum fixed price of Rs. .

) for Construction including free trial run for three months or such other sum as may be

ascertained in accordance with the conditions.

2. I/We agree that

(a) If we fail to provide required facilities to the Employer’s representative or any other

person/Agency by the Employer to perform on his behalf for carrying out the inspection and

testing of materials and workmanship.

(b) If we incorporate into the Works, materials before they are tested and approved by the Engineer’s

(c) If we fail to deliver pure water of required quantity according to the conditions/stipulations of

the Contract, the Engineer will be at liberty to take any action including termination of Contract

and impose at his absolute discretion any penalties, and/or reject the work.

3. We undertake, if our Bid is accepted, to complete and deliver the works in accordance with the

Contract within ................... Months, inclusive of monsoons, from the date or receipt of Letter

of Acceptance issued to us by you.

4. We agree to abide by this Bid for a period of 180 days from the last date of submission of bid and

it shall remain binding upon us and may be accepted at any time before the expiry of that period.

5. In the event of our Bid being accepted, we agree to enter into a formal Contract Agreement with you

incorporating the conditions of Contract thereto annexed but until such agreement is prepared this Bid

together with your written acceptance thereof shall constitute a binding Contract between us.

Volume-II: Price Bid

6. We agree, if our Bid is accepted, to furnish performance Security in the forms and of value specified

in the Clause 1 of Volume-IB, General Conditions of Contract.

7. We have independently considered the amounts of liquidated damages shown in Appendix to Bid and

agree that they represent a fair estimate of the damages likely to be suffered by you in the event of

the work not being completed by us in time.

8. We understand that you are not bound to accept the lowest or any bid you may receive. Dated this

(Name of the person)

(In the capacity of)

Duly authorized to sign Bid for and on behalf of (Fill in

block capitals)

Volume-II: Price Bid

Name of work: - Providing, Supplying, Lowering, Laying, Jointing &

Commissioning of Rising Main DI 750mm Dia pipeline & Pumping Machinery

with all allied works from NMC to ZBC offtake @Ch.2760m for SSW A-3 RWSS

with 10 Years Operation & Maintenance

Schedule showing approximate quantity of materials to be supplied to the

contractor at the govt. store for the work to be executed on contract and the rate

which they are to be charged.

Sr. No. Particular Qty Rate at which Deptt. Place

Rate Unit issue of

1) The contractor submitting the Tender shall see that the rate in Schedule-A are filled in by the

Engineer in Charge at the time of issue tender.

2) The contractor while submitting the tender shall provide his own arrangement at his own cost

for loading, unloading, and transporting safety to the site of work the cement stipulated in

3) Binding wire of 15 gauge of thinner gauge required for placing the reinforcement in position

shall be provided at his own cost.

4) All the materials required for the items other than labour in Schedule-A but available with the

dept will be issued on request to the contractor (for use in this contract only) at prevailing market

rates or departmental issue rates whichever is higher

5) All the surplus materials supplied by the department. As mentioned in schedule-A should be

handed over to the Department by the contractor at the Govt stores as directed

6) The materials mentioned in schedule-A shall have to be checked for their correctness and

soundness by the contractor before taking the delivery of the materials from the Government

7) Necessary cement will be purchased by the agency at their own cost from open market

8) The persons of firm submitting the Tender should see that rates in the above schedule are

filled up by the Executive Engineer, on the issue of form prior to the submission of the Tender.

9) Carting of above materials should be done by contractor at his own cost

10) Contractor should return the balance materials in good and acceptable condition, otherwise

recovery at the double rates will be affected in view of Clause

Signature of the contractor Executive Engineer Deputy Executive Engineer

P.H.W. Division P.H.S.Sub Division

Ahmedabad Viramgam

Volume-II: Price Bid

1. As mentioned in the Conditions of contract, the Contract being a lump sum type turnkey Contract on

EPC basis, the provision of measurement will be applicable only for the assessment of value of work

done for inclusion in any interim certificate for part payment to the Contractor.

2. The Schedule specifies the procedure for all such assessment of the items specified in Schedule B.

3. Each item of Schedule-B has been divided into broad components. The Employer's Representative shall

assess the value of each component as indicated in paragraph 6 herein below.

4. Percentages are indicated against each component of each items specified in Schedule B, based on the

Employer's best appreciation of the value of the component as related to the total costs of the concerned

item as whole. A head titled (any other item(s)) is included in each breakdown of schedule and the

tenderer shall at the time of tendering indicate any additional items which he considers necessary but

cannot be covered by any of the heads indicated in the breakup.

5. The percentage breakup as indicated in the Schedule may differ from that corresponding to the tenderer’s

scheme and design and he should take this into account while quoting his lump sum prices for the items

specified in Schedule-B.

6. The contractor shall, after approval of his detailed designs and drawings furnish to the Employer's

Representative an initial bill of quantities to all major items, to be reviewed and updated periodically

with the Employer's Representative. This bill of quantities will be used for assessment of percentage

progress of the component at any stage. By measurement jointly taken by the Employer's Representative

and the Contractor, mutually agreed and entered in the measurement books in the form and by the method

approved by the Employer's Representative, and signed jointly by both the parties.

Volume-II: Price Bid

LIST FOR EQUIPMENTS/INSTRUMENTS REQUIRED FOR SITE OFFICE WORK.

Item Description

Agency Has to Procure and must supply at site free of cost and hand over to Engineer in charge

within one month from date of work order given as under.

N Description Nos Of item.

All In One Computer not less than 24 inch Display, Intel core i7 , 12th 3.0 No

1 Generation, 16 GB RAM, 1 TB HDD, 512 GB SSD, with windows 11 & Above

and office 2019 both preinstalled from brand DELL, HP, Lenovo as approved

by Engineer in Charge

Multifunction Printer with 34 PPM speed, LCD Display, Auto Duplex from 3.0 No

2 brand like Brother, Canon, HP or equivalent with all necessary accessories

etc. complete on the name of “Executive Engineer, P. H. Works Division,

Note: - all above item must be provide by Agency at free of cost.

Signature of Contractor Executive Engineer

P. H. Works Division

Volume-II: Price Bid

SUMMARY (SCHEDULE-B)

Name of Work: Providing, Supplying, Lowering, Laying, Jointing & Commissioning of Rising

Main DI 750mm Dia pipeline & Pumping Machinery with all allied works from NMC to ZBC

offtake @Ch.2760m for SSW A-3 RWSS with 10 Years Operation & Maintenance

Sr. No. Name of Work Amount Rs.

1 SCHEDULE - B1 DI Pipeline

SCHEDULE – B2 Pumping

3 Operation & maintenance

SCHEDULE - B Total Amount B(B1 - B2)+O & M

SCHEDULE - B Total Amount B(B1 - B2)+O & M

I/WE am/are willing to carry out the work

at..............%above/below

............................Percentage (in words) the estimated cost mentioned

above amount of my/our tender works put as under

Estimated Amount Estimated Amount

contractor Deputy Executive Engineer Executive Engineer

Public Health Sani.sub.Divn. Public Health Works Division

Viramgam Ahmedabad

Volume-II: Price Bid

SCHEDULE – B-1 DI Pipeline

QTY Unit Item Rate Per Amount

In Fig. In Word

Excavation for pipe line trenches for water

supply, sewerage line, manhole etc. all with

shoring and struting if required as per

required gradient and line including safety

provisions using site rails and stacking

excavated stuff up to all required lead

Cleaning the site etc. complete for lifts and

strata as specified.

Up to 1.50 Mt. Depth in soft soil Rs. Eighty

Up to 1.50 to 3.00 Mt depth Rs. Ninety Eight Cum

Providing and supplying D.I K-7 pipes for

following nominal bare dia. with internal

cement mortar lining including all taxes,

insurance, transportation, freight, octroi,

inspection charges, loading, unloading, Rs. Thirteen

conveyance to departmental stores, stacking Thousand one

etc. complete. IS 8329-2000) Rate for DI Hundred Seventy

pipe based on whoesale Price Index of PIG Seven only

Iron as 157.60 for the month of Dec-2022.

Manufacture, Supply & Delievery of

Ductile Iron Flange Socket spigot bends,

tees, reducers or any other specials as per

BS-EN-545/1995 Class-A series K12

suitable for use with D.I. Pipes

manufactured as per IS-8329/1994

delievery of specials is to be made to

GWSSB store or site of works any where in

Gujarat including all taxes, loading,

uploading, carting, stacking, insurance,

inspection, charges, octroi, etc. complete.

Rs. One Hundred

5236.00 Kg 350 mm dia Above 151.00 Kg

Lowering, laying and jointing C.I.S & S.

Spun pipes suitable for Tyton joints/

Mortarlined D.I. pipes of various classes

with C.I./M.S. specials of following

diameters in proper position, grade and

alignment as directed by Engineer-In-

Charge including hydraulic testing etc.

Rs. Five Hundred

3000.00 RMT 750 mm dia 571.00 RMT

Seventy One only

Volume-II: Price Bid

Refilling the pipe line trenches incl.

Ramming, watering, consolidating disposal Rs. Twenty Two

of surplus stuff as directed within a redius only

Providing and Supplying ISI mark CI

Butterfly valves as per IS:13095 ( LE) of

following Class and diameter including all

taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading,

unloading conveyance to departmental

stores stacking etc. complete. PN-1.0

500mm Dia Thousand Six

Providing and Supplying ISI mark CI/.DF

Sluice valves/ scour valve as per IS:14846 (

LE) of following Class and diameter

including all taxes, insurance,

transportation, freight charges, octroi,

inspection charges, loading, unloading

conveyance to departmental stores stacking

etc. complete. PN-1 with hand wheel/cap

operated ( PD type short body)

400mm Dia Thousand Seven

Lowering, laying and jointing in position

following C.I./D/F Reflux valves, Butterfly

valves, Sluice valves including cost of all

labour, jointing, materials, including nut

bolts and giving satisfactory hydraulic

testing etc, complete.

400mm Dia Hundred Seventy

1.00 No. 500mm Dia 2905.00 No.

Construction of valve chamber in brick bela

stone masonary, locally available in C.M.

1:6 foundation concrete 150mm thick in

C.C. 1:4:8 of trap metal size 25mm to

40mm thick, inside cement plaster in C.M.

1:3 and cement pointing outside in C.M. 1:3

and top cover of precast RCC slab 100mm

thick (With Key hole in two parts, each with

handles or MS bar etc. complete as given

size) upto 1mtr depth from G.L. to pipe

GWSSB invert level incl. complete civil works but

excl. cost of excavation and refilling, with

cast in situ RCC slab in one single piece

with fixing of CI-MH frame and cover

Volume-II: Price Bid

(Excl. cost of CI-MH Frame cover) with

23mm thick brick masonary wall in

C.M.1:6. with precast slab in two parts

0.9m x 0.9m x 1m upto 150 to 450mm dia Thousand Seven

pipe for SV/ BFV valve Hundred Thirty

1.3m x 1.3m x 2m upto 450 to 600mm dia Thousand Three

pipe for BFV valve Hundred Fifty one

Rs. Six Thousand

1.00 MTR 6084.00 MTR

For 1 Mtr. Extra Depth Eighty Four only

Providing and supplying C. I. Temper poof

Air valves wllh SS 304 Floot gun metal

nozzle approved make &. quatily of

following class ond diameter Including all

taxes. lnsurance. transportation. freight

charges, octroi, Inspection charges,

loading, unloading, conveyance to

department stores, stacking etc.complete.

(With isolating sluice valve PN1.6)

Rs. Twenty Nine

6.00 No. 150mm dia 29606.00 Thousand Six No.

Hundred Six only

Lowering, laying and jointing in position

Air valves including cost of all labour,

jointing, materials, including nut bolts and

giving satisfactory hydraulic testing etc,

Air valve double ball flanged

Rs. Six Hundred

6.00 No. 150mm dia 605.00 No.

Erection of air valve riser by installing new

MS pipe of 6 mm thick and 3.2m length

with necessary fitting such as flange of

approximate size nut bolts and embeded

pipe in RCC M15 with offset of 10cm

around pipe with necessary steel etc

Air valve without isolating sluice valve PN

6.00 No. 150mm dia 7792.00 No.

Providing CC M-100 for Encasing pipes Rs. Four

using trap metal size 12mm to 50mm incl. Thousand One

225.00 Cum form work curing, consolidation etc. 4113.80 Hundred Thirteen No.

complete for various location on pipeline. & Paise Eighty

Using trap metal of 20mm nominal size only

Volume-II: Price Bid

Making connection with existing pipeline

1.00 Job with all specials etc complete Rs. Ten Lac only Job.

Dewatering by Pumping set of required

capacity including temporary platform, Rs. Eighteen &

88000.00 Hp/hr carting, pumping at site and fixing the same 18.32 Paise Thirty Two Hp/hr

in position including all accesssories and only

fuel and labour etc. complete

Drilling of Horizontal bore for water main

pipeline crossing under the road/railway

track in all strata with required including

fixing of MS ( or as specified by

Railway/Road Authority) casing pipe

suitable size and thickness . Rate includes

the cost of Drilling Bore Hole casing pipe

and welding pushing etc complete but

excluding the cost of water main, valvs and

other items. Entire Work should be as per

approved Drawing and as per instruction of

Railway/Road authority for following

diameter of bore hole for MS pipe

Horzontal drilling 1300 mm & MS Casing

pipe 1200mm dia &16mm thick for carrier

60.00 RMT pipe 750 mm dia from NMC OFFTAKE 36583.00 No.

POINT to Dabhsar HW for Highway for

Brick work using common burnt clay

building bricks having crushing strength not

less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement :

-fine sand) (B) Conventional

55.8064 Cum Canal stoppage Brick wall 4051.78 Cum

Eighty One only

Cement plaster 20 mm thick jn C.M. 1:2

Rs. Two Hundred

139.70 Sq.mt using water proofing compound of 202.00 Sq.mt

approved quality

Providing and casting in situ C.C. in grade

M-15 (approx. corresp. to prop.(proportions

as per mix design or as per Table 9 of IS455

2000 n masses by weigh batching ) using

granite, quartzite trap metal Of size 6 mm to Rs. Four

20 mm for RCC work, including Thousand Seven

2.54 Cum 4732.00 Cum

scaffolding centering, form work, needle Hundred Thirty

vibrated consolidation, curing comp. up to two only

6 meter ceptn or hetght (excluding cost of

reinforcement and neat rnishing) with

centering and shuttering/deshuttering etc

comp. for structure

Total For Schedule B-1 Rs.

SCHEDULE – B-2 Pumping Machinery

Volume-II: Price Bid

Qty. Unit Rate Unit Amount

In Fig In Words

Polder Submersible Pump Set:

Supply, installation, testing &

commissioning of Polder type

submersible pump set, non clog type

with required capacity and head as

per IS 8034 suitable for water having

upto 10000 PPM turbidity with

suitable summersible wet type,

water cooled, squirrel cage motor to

IS 9283, working on three phase,

Hz ± 3%, 415 volt ± 10% , AC Rupees

supply, 1450 RPM synchronous Four Lac

speed with 30 mtr copper conductor Forty

4.00 Set flat cable from pump to control panel 447049 Seven Set

with cable end terminations, all Thousand

supports, clamp, pipe fitting Forty Nine

alongwith mechanical seal, bearing only

bush, strainer etc. complete set

following M.O.C. : Casing C.I., SS /

CF8M Impeller, Bronze wearing

ring and Bearing bush, TC

mechanical seal, CS/SS bearing, SS

shaft with sleeve, SS strainer and MS

motor body. 04 sets with discharge

20 meters head (H) with (2W+2S)

with minimum 45 KW (60 HP) .

Butter Fly Valve: Supply, Rupees

installation, testing & Seventeen

commissioning of double flanged Thousand

4.00 No. gear operated cast iron Butterfly 17945.00 Nine No.

valve on delivery line of individual Hundred

pump as per IS 13095 of Size 300 Forty Five

mm of PN 1.0. only

Butter Fly Valve: Supply, Forty

installation, testing & Seven

commissioning of double flanged Thousand

1.00 No. gear operated cast iron Butterfly 47557.00 Five No.

valve on common discharge Hundred

header line of pumps as per IS Fifty

13095 of Size 500 mm of PN 1.0. Seven

Volume-II: Price Bid

Check Valve: Supply, installation,

testing & commissioning of flanged

cast iron dual plate check valve on

delivery line of individual pump as

per API 594 / 598 of Size 300 mm of

Check Valve: Supply, installation,

testing & commissioning of flanged

cast iron dual plate check valve on

1.00 No. 138012.00 Eight No.

common discharge header line of

pumps as per API 594 / 598 of Size

Expansion Bellow: Supply,

installation, testing & Rupees

commissioning of S. S. Flanged Ten

Expansion bellow as per EJMA with Thousand

15 mm axial movement, 300 mm Two

overall length with tie rods, nuts etc. Hundred

of size 300 mm dia of PN 1.0 on only

delivery line of individual pump.

Expansion Bellow: Supply,

installation, testing & Rupees

commissioning of S. S. Flanged Twenty

Expansion bellow as per EJMA with Two

1.00 Nos. 15 mm axial movement, 300 mm 22200.00 Thousand Nos.

overall length with tie rods, nuts etc. Two

of size 500 mm dia of PN 1.0 on Hundred

common discharge header line of only

M S Pipe: Supply, installation,

testing & commissioning of

submerged arc welded M S pipes

coated with bituminous paint having

beveled ends from plate or coil

48.00 RMT 3517.00 Five RMT

conforming to IS 3589 / 2001 or its

latest revision/ amendment of dia.

323.9 mm (OD) with minimum

mm thickness for delivery line of

individual pump.

Volume-II: Price Bid

M S Pipe: Supply, installation,

testing & commissioning of

submerged arc welded M S pipes Rupees

coated with bituminous paint having Five

beveled ends from plate or coil Thousand

conforming to IS 3589 / 2001 or its Five

latest revision/ amendment of dia. Hundred

508 mm (OD) with minimum 5.6 Eight only

mm thickness for common

discharge header line of pumps.

Providing, fabricating & erecting the

M. S. structure as per requirement

on site incorporating proper size of

M. S. (C channel, I section, angles,

flat bar, channels, sections, pipes,

chequrred plate etc) as per

requirement for making permanent

structure for 04 polder pumps,

individual Delivery pipes, valves

etc. with girder required for geared

18000.00 Kg mounted trolley for 2 MT capacity 76.20 Kg

chain pulley blocks, with making

screens for protection of polder

pumps from Debris, vegitaton,

Floating debris coming from canal

etc.as per requirement at Site

complete with cutting, welding,

grinding and finishing duly painted

with one coat of red oxide with

Erection on site as Per Directives of

Engineer in charge.

Chain pully Block:- SITC of Chain

pulley block with triple gear

arrangement, lifting hook, laod chain

1 Set 19920.00 Nine Set

& hand chain & locking device

etc.of Capacity 02 MT capacity

with 09 mtr lift.

M S Specials: Supply, installation,

testing & commissioning M S

800 Kg fittings & specials like tees, bends, 104.52 Kg

flanges, reducers, nut bolts washer

Rubber Packing: Supplying &

GWSSB fitting Neoprene type rubber packing

150 Kg 156.00 Hundred Kg

of minimum 6 mm thickness for all

connections as per requirement.

Volume-II: Price Bid

Pressure Gauge: Supply,

installation, testing &

commissioning Bourdon type

pressure gauge with ± 1% accuracy,

Direct bottom 1/2'' NPT(M)

proocess connection,IP67,glycerin

filled, SS 304 case with Bayonet

type bezel, SS316 L Burdon tube, SS

316 movement material,Aluminium

dial with black graduation on with

background,micro zero adjustable

5 Nos. 3471.00 Four Nos.

pointer, neoprene gasket, blow out

disc, shatter proof glass, SS tag plate

etc as per IS 3624 having 0 to 4 Kg

/ Cm2 range of 150 mm dia size

with 3 way gauge cock SS-316 1/2''

NPT(M) process connection

complete to match the pressure

gauge & syphon for pressure gauge

1/2"" NPT(F)x 1/2'' NPT(M) process

connection complete to match the

Electromagnetic Flow Meter: Supply,

installation, testing & commissioning of

mm dia. full bore Electro magnetic flow

meter with factory calibrated, regular

power operated, flanged connection, flow

sensor, indicator, transmitter and totaliser

with all accessories viz.surge arrestor,

power and control cables up to stater panel,

cabinets, hardware etc. with 1.) Flow

Meter / sensor: DC pulsed tpe, IP

protection, flanged process connection as IS

1538 or equivalent standard ,SS 304/

metallic Alloy flow tube, SS 316 / SS

L/Hastelloy sensor,SS 316 / Hastelloy Rupees

grouting RIng/ inbulit Grounding electrode, Two Lac

Neoprene / poluurethane/ hard rubber/ Sixty

Rilsan lining, SS 304 / Die cast Aluminium/ Three

carbon steel with Anticorrosive Paint coil

Housing with Junction box, CS flanges, 2.)

263124.00 Thousand NOS

Flow Transmitter / Converter (Regular One

power operated): Microprocessor based, Hundred

Modulur design 2 line LCD for indication of Twenty

actual flow rate, forward, reverse, sum Four only

totaliser display, ± 0.5 % accuracy at 0.3 to

0.4 m/sec velocity, 4 to 20 MA with HART/

Modubus output, one scalable pulse, one

status output, IP 67 protection, Die cast

Aluminium/ polycarbonate/ SS 316 with

Anticorrosive Paint/ PU finish with glass

window enclosure, inbulit EEPROM and

data logger, 30 meters cable length for

sensor to transmitter communication etc.

alongwith wall mounted/ stand mounted

cabinet. Agency has to integrate/connect

Electro-magnetic Flow meter with

GWSSB’s existing SCADA system with

Volume-II: Price Bid

necessary hardware and software

Pipe support / thrust blocks.:

Providing & casting in situ

reinforced cement concrete in grade

M 20 (Ratio 1:2:4) using quartzite Rupees

trap metal of size 6 mm to 12 mm for Nine

RCC work, including scaffolding Thousand

centering, form work, consolidating, One

12 CUM 9180.40 CUM

curing etc. inclusive providing and Hundred

binding necessary size TMT steel Eighty &

bars of Fe 415 grade with water Paise

proofing compound as per directives Forty only

for pipe support / thrust blocks/ base

Foundation for vertical beam/girder

for MS structure.

Supply and installation of MS

fabricated structure cabin @ site

of work using 65 mm, 50 mm &

mm square pipes with cabin size

mtr X 3 mtr X 3 mtr including

providing & fitting of (1) backalite

sheet 3.5 mm thick in sides, (2)

guage MS sheet outer side for side

walls, (3) backalite sheet 3.5 mm

thick sheet for roof side, (4)

guage GI sheet out side with 15 mm

plywood sandwitch fitting &

flooring with 19 mm water proof

1 Nos. 364000.00 Sixty Four Nos.

plywood sheet and (5) shock proof

rubber mating. Job includes oil

painting two coats, door locking

handle arrangement, providing

proper air ventilation and fuse box.

with lighitng inside and outside with

required luminaire i.e. wiring,

switch board, tubelights, outside

street lights etc The meter & fuse

box should be fitted on timber hold

GWSSB fast for holding screw or nut bolts by

semi skilled labour as per detailed

technical specifications, drawings

Volume-II: Price Bid

and instructions of the Engineer-in-

Junction box: Supply, installation, testing

& commissioning of 1.) weather proof, dust

& vermin proof, floor mounted front

operated cubical switchgear enclosure (of

manufacturers at CPRI approved factory)

having IP-64 protection made from 14 SWG

thick CRC M.S. sheet for outer body &

doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary supporting

angles, flats including cutting,bending,

drilling, welding, riveting with internal

partitions & cable alley as per requirements

& instruction of engineer-in-charge with

erection of switch gears, BUSBARS, with Rupees

suitable size of interconnecting PVC copper Twenty

wire / copper strips, rubber grommets, rib,

bakelite control fuses for measuring

instruments,earth bus & earth bolts, Thousand

foundation flange - bolts-base Five

4 Set 27590.34 Set

Plates,sufficient nos. of hinged doors, Hundred

handles with locking arrangement Ninety &

andrubber gasket complete. The Panel shall

be painted with epoxypowder coating. The

dimension shall be measured excluding base Thirty

beams) & 2) with Copper bus bar duly Four only

wrapped with colour insulation tape for

phase sequence, three phase & neutral each

on meter long suitable for required amps

capacity & cross section not less than 450sq

mm necessary bus bar supports / insulators

including on off push button with ampere

meter analog type moving iron CT operated

in scale of 0 to 400 amperes with 3 numbers

of CT etc complete with size of enclosure at

750 mm (length) x 600 mm (width) x

mm (Depth) .(Copper busbars with cross

sectional area not less than 450 mm),for

Volume-II: Price Bid

Switch Fuse Unit: Supply,

installation, testing &

commissioning of approved make

triple pole metal clad switch fuse

4 Nos. 7162.00 One Nos.

unit 415 / 500 V with HRC fuse of

suitable load and neutral link

confirming to ISS of 250 Amperes

capacity of category II.

Switch Fuse Unit: Supply, Rupees

installation, testing & Twenty

commissioning of approved make Two

four pole LT heavy duty switch fuse Thousand

1 Nos. 22586.00 Nos.

unit 415 / 500 V with HRC fuse of Five

suitable load and neutral link Hundred

confirming to ISS of 800 Amperes Eighty Six

capacity of category II. only

Cubical Panel: Supply, installation,

testing & commissioning of Auto

transformer starter suitable for local

& remote pump control application

consisting of Auto Transformer

(vacuum impregnated, air cooled Rupees

having three (3) tappings at 50%, Fifty One

65% and 80%), incomer MCCB / Thousand

4 Set MPCB, overload relay and 51541.00 Five Set

contactors as per Type II Hundred

coordination including digital MFM Forty One

with RS 485 communication port, only

analogue type ammeter with selector

switch,APP type capacitors, run

hour meter, required protective

relays & control accessories. 60 HP

capacity ..as per RC specifications.

Supply, laying, testing &

commissioning 1.1 kV grade, XLPE

insulated, stranded Aluminium

conductor, galvanised steel flat strip

/ round wire armoured, extruded Rupees

PVC type ST2 sheathed, heavy duty Two

cable (to be laid on wall surface with Hundred

100 RMT 287.00 RMT

necessary clamps / in existing cable Eighty

trench / cable trays / conduit / pipe Seven

sleeves at road crossing or floor as only

per site requirement) conforming to

IS:7098 (Part-1) & IEC:60502 (Part-

1) of following sizes: 3.5 C x 70 sq

GWSSB ITEM No :-23

Volume-II: Price Bid

Supply, laying, testing &

commissioning 1.1 kV grade, XLPE

insulated, stranded Aluminium

conductor, galvanised steel flat strip

/ round wire armoured, extruded

PVC type ST2 sheathed, heavy duty

cable (to be laid on wall surface with

50 RMT 784.00 Hundred RMT

necessary clamps / in existing cable

trench / cable trays / conduit / pipe

sleeves at road crossing or floor as

per site requirement) conforming to

IS:7098 (Part-1) & IEC:60502 (Part-

1) of following sizes: 3.5 C x 240 sq

mm (for supply)

Cable Glands: Supply, installation,

testing & commissioning of heavy

duty double compression type brass

8 Nos. 270.00 Hundred Nos.

cable glands with brass washers &

rubber ring for XLPE armoured

cable of 3 1/2 C x 70 sq mm size.

Cable Lugs: Supply, installation,

testing & commissioning of

crimping type heavy duty tubular

40 Nos. type copper lugs suitable for XLPE 8.00 Nos.

armoured multistrand Aluminum

conductor cable of 3 1/2 C x 70 sq

Cable Glands: Supply, installation,

testing & commissioning of heavy

duty double compression type brass

8 Nos. 720.00 Hundred Nos.

cable glands with brass washers &

rubber ring for XLPE armoured

cable of 3 1/2 C x 240 sq mm size.

Cable Lugs: Supply, installation,

testing & commissioning of

crimping type heavy duty tubular Rupees

16 Nos. type copper lugs suitable for XLPE 35.00 Thirty Five Nos.

armoured multistrand Aluminum only

conductor cable of 3 1/2 C x 240 sq

Earthing: Supply, installation,

testing & commissioning of earth pit

of minimum bore dia 150 mm size

LS approved make earthing electrode LS

consisting pipe in pipe technology as Job

per IS 3043 - 1987 made of corrosion

free G I pipe of outer dia. 50 mm dia

having 80-200 micron galvanising,

Volume-II: Price Bid

inner pipe dia. of 25 mm having 200-

250 micron galvanising connection

terminal dia of 12 mm with constant

ohmic value surrounded by highly

conductive compound with high

charge dissipation with length of

pipe 1.0 meters & back filling

compound 1 no. bag of 15 kg (MCC

panel & LT motors)

G I Strip: Supply, erection, testing Rupees

& commissioning of hot deep Seventy

galvanised strips for earthing of 32 x Seven

6 mm size. only

Supply of 4 mm thick corrugated

rubber mat for LT as per IS 5424 and

4 Sq.mtr 1017.00 Thousand Sq.mtr

of required length and breadth with

good insulation property for 22 KV.

Dismetaling of Exisiting Polder

pumps, pipings, valves, flowmeter,

panel etc. installed at Rampura Rupees

Canal complete with loading, carting Fifty

1 Job 50000.00 Job

to & unloading, stacking at the Thousand

departmental store of sub divisional only

store of Viramgam or as per

instructions of EIC.

SCHEDULE – B-1 + B-2 Rs.

Operation & Maintenance 10 Years

Qty. Unit Description Rate Unit Amount Rs.

In Fig In Words

GWSSB @Ch.2760m

Volume-II: Price Bid

First Year Rupees One Lac Month

Fourteen Thousand

Eight Hundred Thirty

Seven & Paise Fifty

12 Month 114,837.5200 Two only

Second Rupees One Lac Month

Year Twenty One

12 Month 121,727.7800 Seventy Eight only

Third Year Rupees One Lac Month

Thousand Thirty One

& Paise Forty Four

12 Month 129,031.4400 only

Fourth Rupees One Lac Month

Year Thirty Six Thousand

Seventy Three &

Paise Thirty Three

12 Month 136,773.3300 only

Fifth Year Rupees One Lac Month

Forty Four Thousand

Paise Seventy Three

12 Month 144,979.7300 only

Sixth Year Rupees One Lac Month

Fifty Three Thousand

Six Hundred Seventy

Eight & Paise Fifty

12 Month 153,678.5100 One only

Seventh Rupees One Lac Month

Year Sixty Two Thousand

Eight Hundred Ninety

Nine & Paise Twenty

12 Month 162,899.2200 Two only

Eight Year Rupees One Lac Month

Hundred Seventy

12 Month 172,673.1800 Eighteen only

Nineth Year Rupees One Lac Month

12 Month 183,033.5700 Thousand Thirty

Volume-II: Price Bid

Three & Paise Fifty

Tenth Year Rupees One Lac Month

Thousand Fifteen &

12 Month 194,015.5800 Paise Fifty Eight only

Total Capital+O & M

Rs. Seven Crore Thirty Lac Nineteen Thousand five Hundred five & Paise forty Two Only

I/WE /are agree to carry out the work @

……………………above /below the estimated cost

Signature of contractor

Executive Engineer Executive Engineer Deputy Executive Deputy Executive Engineer

P.H.W. Division P.H.M. Division P.H.S.Sub Division

P.H.M.Sub Division

Ahmedabad Ahmedabad Viramgam

Volume-II: Price Bid

(Bidders are required to fill up all blank spaces online in this Bid Form)

The Superintending Engineer

Gujarat Water Supply & Sewerage Board

Jal Bhavan, Behind Town Hall,

Elisbridge, Ahmedabad

SUB : BID DOCUMENT WORK FOR

Providing, Supplying, Lowering, Laying, Jointing & Commissioning

of Rising Main DI 750mm Dia pipeline & Pumping Machinery with all

allied works from NMC to ZBC offtake @Ch.2760m for SSW A-3

RWSS with 10 Years Operation & Maintenance.

1. Having visited the site and examined the Bid Documents, Drawings, Conditions of Contract,

including Addenda/Amendments to the above, for the execution of the above Contract, we the

undersigned offer to carry out operation and maintenance the whole of the said Works for two

years from the date of work order as given in Conditions of Contract and in conformity with the

Annexure, Bidding Documents, including Addenda Nos.

(insert numbers) for Lump sum fixed price of Rs.

)for Construction for

Operation and Maintenance for a period of two years or such other sum as may be ascertained

in accordance with the Conditions.

2. I / We agree that

(a) if we fail to provide required facilities to the Employer's representative or any other

person/agency by the employer to perform on his behalf for carrying out O & M work

(b) if we fail to deliver raw water of required quantity and maintaining the quality according

to the conditions/stipulations of the Contract, GWSSB will be at liberty to take any action

including termination of Contract and impose at his absolute discretion any penalties,

and/or reject the work.

3. We agree to abide by this Bid for a period of 180 days from the date fixed for receiving the same

and it shall remain binding upon us and may be accepted at any time before the expiry of that period.

Volume-II: Price Bid

4. In the event of our Bid being accepted, we agree to enter into a formal Contract Agreement with you

incorporating the conditions of Contract thereto annexed but until such agreement is prepared this Bid

together with your written acceptance thereof shall constitute a binding Contract between us.

5. We agree, if our Bid is accepted, to furnish Performance Bond/Security in the forms and of value

specified in the Conditions of Contract of a sum equivalent to 10% of the Contract price for due

performance of the Contract.

6. We understand that you are not bound to accept the lowest or any Bid you may receive. Dated this

(Name of the person)

(In the capacity of)

Duly authorized to sign Bid for and on behalf of (Fill in

block capitals)

Volume-II: Price Bid

1. As mentioned in the Conditions of contract, the Contract being a lump sum type turnkey Contract on EPC

basis, the provision of measurement will be applicable only for the assessment of value of work done for

inclusion in any interim certificate for part payment to the Contractor.

2. The Schedule specifies the procedure for all such assessment of the items specified in Schedule B.

3. Each item of Schedule-B has been divided into broad components. The Employer's Representative shall

assess the value of each component as indicated in paragraph 6 herein below.

4. Percentages are indicated against each component of each items specified in Schedule B, based on the

Employer's best appreciation of the value of the component as related to the total costs of the concerned

item as whole. A head titled (any other item(s)) is included in each breakdown of schedule and the

tenderer shall at the time of tendering indicate any additional items which he considers necessary but

cannot be covered by any of the heads indicated in the breakup.

5. The percentage breakup as indicated in the Schedule may differ from that corresponding to the tenderer’s

scheme and design and he should take this into account while quoting his lump sum prices for the items

specified in Schedule-B.

6. The contractor shall, after approval of his detailed designs and drawings furnish to the Employer's

Representative an initial bill of quantities to all major items, to be reviewed and updated periodically

with the Employer's Representative. This bill of quantities will be used for assessment of percentage

progress of the component at any stage. By measurement jointly taken by the Employer's Representative

and the Contractor, mutually agreed and entered in the measurement books in the form and by the method

approved by the Employer's Representative, and signed jointly by both the parties.

Signature of the contractor Executive Engineer Deputy Executive Engineer

P.H.W. Division P.H.S.Sub Division

Ahmedabad Viramgam

Volume-II: Price Bid

BREAKUPFORPAYMENTSSCHEDULE

BREAK UP FOR INTERIM PAYMENTS

Item Description of Items Percentage Payment to be

a On receipt of materials at project site 65 % of Quoted rate

b On Excavation, Lowering, laying and Jointing 20 % of Quoted rate

c On Hydraulic testing 5 % of Quoted rate

d On refilling and disposal of surplus stuff 5 % of Quoted rate

e After commissioning 5 % of Quoted rate

a On receipt of materials on site 70 % of Quoted rate

b On erection 20 % of Quoted rate

c On Hydraulic testing 5 % of Quoted rate

d After commissioning 5 % of Quoted rate

and condition of the tender.

Part A is payable on monthly basis

whereas part B & C are subject to

completion of activities and approval

of the measurement as per breakup of

schedule C and ‘Annexure-VI

(Payment resolution time and

Signature of the contractor Executive Engineer Deputy Executive Engineer

P.H.W. Division P.H.S.Sub Division

Ahmedabad Viramgam

Volume-II: Price Bid

6 All Electro-mechanical works

A Mechanical Equipment

A01 Pump Motor Assembly Set, pump foundation, drain Total 35% weightage (amount) of

pumps, vaccum pumps Accepted LS KW Based Quoted

A02 Valves, EOT/MCPB, Expansion Bellows and Total 10% weightage (amount) of

Flowmeter, pressure gauge, & thrust blocks Accepted LS KW Based Quoted

A03 Pipes and Specials. Total 5% weightage (amount) of

Accepted LS KW Based Quoted

B Electrical and instrumentation Equipment.

B-1.1 LV Distribution Board, L V PDB, LDB, SDB & MCC Total 45% weightage (amount) of

& Panel Accepted LS KW Based Quoted

B- LV Power & Control Cables, Cable Trays, Internal Total 5% weightage (amount) of

2.1 and External Lighting, Earthing System with Safety Accepted LS KW Based Quoted

Accessories. rate

7 All Mechanical – Electrical Equipment shall have following three stages of payment viz.

On completion of Supply, on completion of Erection / Installation & on

completion of Testing & Commissioning as per weight age specified above.

1 On Supply of Equipment at Site 75 % of Weight age (Amount)

2 After Installation / Erection of Equipment 15 % of Weight age (Amount)

3 After Successful Testing & Commissioning of 10 % of Weight age (Amount)

Equipment (On Completion of Stipulated Trial Run)

8 Village Level Pumping Machineries & Electrical

items to be executed at Shahpur & Hasalpur P.S.

a On receipt of Equipment on site 75 % of Accepted Price

b On erection/Installation/Connection 15 % of Accepted Price

c On Successfull testing Commissioning of equipment 10 % of Accepted Price

9 Valve chambers

A On completion works as per approved drawings 95% of Quoted rate

B After commission of system 5% of Quoted rate

Volume-II: Price Bid

A MECHANICAL EQUIPMENTS

1.0 Pump & Motor Set

1.1 Polder pump motor set

2.1 Sluice valve

2.2 Butterfly valves

2.3 Dual plate check valve

3.0 Expansion Bellows

4.0 Electromagnetic Flow Meter

5.0 Chain Pulley Block with Travelling Trolley

B ELECTRICAL EQUIPMENTS

1.0 Cubical Control panel

Volume-II: Price Bid

Name of Pumping Station: Zinzuvada branch Canal Near Main canal

Sr. Particulars Departmental Requirement Bidders' Data

1.1 Make As Per Vendor List

1.2 Model Please Specify

1.3 Type Polder Submersible

1.4 No of stages Single

1.5 No of suction (for impeller) Single

2.0 Duty Parameters & Performance

2.1 Capacity/ Discharge in LPS / M3/ 138.89 LPS

Hour corresponding to 50 Hz

2.2 Head in meters corresponding to 50

Hz frequency at rated discharge

(Head indicated here is inclusive of

head losses from all causes).

2.3 Minimum submergence required in Please Specify

2.4 Specific Speed Please Specify

2.5 Shut off head (Characteristic curse Please Specify

should cover completed range of

operation i.e. minimum operation

head to shut off head).

2.6 Guaranteed pump efficiency at duty Please Specify (Minimum

point in % acceptable efficiency

2.7 Speed corresponding to 50 Hz 2900 RPM

frequency in RPM

2.8 Pump input at duty point In kW Please Specify

2.9 Prime mover required (including Submersible motor

reserve power margin to be Minimum 60 HP rating

specified) (with 15% reserve power

3.0 FEATURES OF CONSTRUCTION

3.1 Type of Impeller Please Specify

3.2 Suction size in mm Please Specify

3.3 Discharge size in mm Please Specify

3.4 Bearings Please Specify

4.0 LIQUID DATA

4.1 Liquid handled Raw water (Narmada canal)

4.3 Temperature Ambient

DATA SHEET FOR LT Submersible Motor for Polder Pump

Sr. Particulars Departmental Requirement Bidders' Data

Volume-II: Price Bid

1.2 Application Pump Motor

2.1 Type of motor Submersible

2.2 Rated Voltage 415 Volts

2.3 No. of phases and frequency 3 Phase, 50 Hz

2.4 Type of duty / designation Continuous / S1

2.5 Method of Starting Auto Transformer Starter

2.6 Class of insulation & temperature Please specify

rise by thermometer

2.7 Ambient reference temperature 45

2.8 Type of Cooling Please specify

2.9 Degree of Protection Please specify

2.10 Nominal synchronus speed 2900 RPM

Corrosponding to 50 Hz frequency

2.11 Diameter Please specify

3 Rating / Performance

3.1 Ratings in kW Please specify (Minimum

acceptable rating 90 HP)

3.3 Efficiency of Motor

1) at Full Load Please Specify

2) at Duty Point Please Specify

3.4 Power Factor

1) at Full Load Please Specify

2) at Duty Point

3.7 Full load current Please Specify

3.8 No load current Please Specify

3.9 Starting current Please Specify

3.10 RPM at duty point Please Specify

3.11 Input at duty point Please Specify

3.12 Type of bearings Ball / Roller / Thrust

3.13 Supply System fault level 20 MVA

3.14 Supply Neutral Resistance earthed

Volume-II: Price Bid

4.1 Hydrostatic test Test certificate (s) required

4.2 Performance test as per IS Required @ Manufacturer's

specifications works & to be witnessed

jointly by TPI & the

department for all pumps i. e.

4.3 Overall efficiency of pump motor set Please Specify

4.4 Static and dynamic balancing test Test certificate (s) required

4.5 Visual inspection check To be carried out jointly by

TPI & department

5.0 COPPER CONDUCTOR CABLE

5.1 Size of cable Please Specify

5.2 Maximum current carrying capacity Please Specify

5.1 Length of cable 30 meters in one length

Certified pump set characteristic curves (For pump: discharge v/s head, discharge v/s power input,

discharge v/s overall efficiency) of pumps to be submitted duly certified by the pump manufacturer duly

marked at duty point with technical bid.

Notes: 1) Characteristic curse should cover completed range of operation i.e. minimum operation head to

2) Please confirm materials as per specifications otherwise state the variation

3) Cross section drawing for both pump and motor showing clearance at bearing wearing run out and

material specification for components.

4) Sizing of cable shall be done considering all derating factors.

Volume-II: Price Bid

Name of Pumping Station: Zinzuvada branch Canal Near Main canal

Sr. Particulars Unit Departmental Bidders' Data

No. Requirement

1.1 Type Both ends flanged /

Non rising spindle

1.2 Make As per vendor list

1.3 Rating of valves PN 1.0 / PN 1.6 (As

1.5 Manufacturing Standard IS 14846 –

1.6 Sizes and quantity As per price bid

2.0 Materials of construction

2.1 Body CI - IS 210 FG

2.2 Bonnet CI - IS 210 FG

2.3 Non rising stem High tensile brass

as per I S or High

tensile steel AISI -

2.4 Wedge CI - IS 210 FG

2.5 Stem Nut Bronze IS: 318 LTB-

2.6 Renewable body seat / wedge Bronze Grade IS:

face ring 318 LTB -

2.7 Stem packing (renewable valve Jute & Hemp IS:

2.8 Hand Wheel CI - IS 210 Gr. FG –

2.9 Bonnet Nuts Carbon steel as per

2.10 Bonnet Bolts Carbon steel as per

2.11 Bonnet Gasket Rubber IS: 638 Type

3.0 Hydrostatic test Pressure

3.1 Body As per IS

3.2 Seat As per IS

Volume-II: Price Bid

BUTTERFLY VALVE

Name of Pumping Station:- Zinzuvada branch Canal Near Main canal

Sr. Particulars Unit Departmental Bidders' Data

No. Requirement

1.1 Type Both end flanged

hand wheel / Gear

1.2 Make As per vendor list

1.2 Rating of valves PN 1.0 / PN 1.6 (As

1.3 Manufacturing Standard IS 13095 / BS

1.4 Sizes and quantity As per price bid

2.0 Materials of construction

1.6 Internal hardware Stainless steel AISI -

2.2 Body/ Disc CI. IS 210 FG260

2.3 Body ring (Retainer/seat) Stainless steel AISI -

2.4 Shaft Stainless steel AISI -

2.5 Disc seat EPDM rubber /

2.6 Bush & Thrust Pad G.M. IS: 318 LTB-

2.7 Body seat Stainless steel AISI -

3.0 Hydrostatic test Pressure

3.1 Body As per IS

3.2 Seat As per IS

Volume-II: Price Bid

DUAL PLATE CHECK VALVES (Non Return Valve )

Name of Pumping Station: Zinzuvada branch Canal Near Main canal

Sr. Particulars Unit Departmental Bidders' Data

No. Requirement

1.1 Type Both end flanged

dual plate type

1.2 Make As per vendor list

1.2 Rating of valves PN 1.0 / PN 1.6 (As

1.3 Manufacturing Standard API 594 / API

1.4 Sizes and quantity As per price bid

1.5 Maximum pressure drop at

design flow rate (mwc)

1.6 Maximum permissible leakage

rate (cc/hr/mm diameter)

2.0 Materials of construction

2.1 Body Cast Iron : IS

2.2 Door & door Face Cast Steel IS

WCB With 13% Cr.

Steel overlay (On

seating surface only)

2.3 Stop, hinge pin & washer Stainless Steel AISI

2.4 Seat ring (Body) EPDM Rubber

2.5 Bearings (Body & Plate lug) PTFE

2.6 Seat ring (Body) SS AISI -

2.7 Spring Stainless Steel AISI

2.8 Hardware Carbon Steel IS

2.9 End Cover Mild Steel

3.0 Hydrostatic test Pressure

3.1 Body As per API

3.2 Seat As per API

Volume-II: Price Bid

EXPANSION BELLOWS

Name of Pumping Station Zinzuvada branch Canal Near Main canal

Sr. Particulars Unit Departmental Bidders' Data

No. Requirement

1 Make As per vendor list

2 Type Single metallic

3 Quantity Nos. As per price bid

4 Manufacturing Standards EJMA

5 Design Pressure (PN) PN 1.0 / PN 1.6 (As

6 Axial Extension mm Minimum 05 mm

7 Axial Compression mm Minimum 15 mm

8 Material of construction

Bellows / Collar / Internal SS 240 GR

Limit rods CS IS :1367, CL

Nut & lock nut CS IS :1367, CL

Lugs / Flanges / Weld ends IS: 2062 Gr. B

9 Design Life Minimum

10 Hydrostatic test pressure Kg / At least double the

Cm2 design pressure

Volume-II: Price Bid

FULL BORE ELECTRO MAGNETIC FLOW METER

Name of Pumping Station: Zinzuvada branch Canal Near Main canal

Sr. Particulars Unit Departmental Bidders' Data

No. Requirement

1 Service Flow measurement on

common discharge

2 Line size On common discharge

header line of pumps

as specified in Price

3 Range setting As per site requirement

4 Liquid Type Clear water / Raw water

5 Type of solid Silt particles

6 Operating pressure 10 / 16 Kg / Cm2 (As

the case may be)

7 Operating temperature 0o C to 50o C

8 Overall accuracy of ± 0.5 % of full scale

9 Quantity No. 1 Each for individual

pumping section as per

(B) Flow Sensor

1 Type Full bore type

Electromagnetic

2 No. of paths As per requirement

3 Measuring principle Magnetic Induction

4 Weather Protection Class IP 68 of IS :

5 Measuring principle Magnetic Induction

6 Type Pulsed DC excitation

7 System Separate with cable

8 Power supply 240 V AC, 50 Hz

9 End Connections Welded Flanges of

10 Flange Rating & Material PN 1.0 / 1.6 Cast steel

11 Electrode Measuring, reference

electrodes with empty

pipe detection & alarm

12 Electrode material SS 316 (Stainless steel)

/ Platinum / Tantalum

13 Meter tube SS 304 (Stainless steel)

Volume-II: Price Bid

14 Electrode type Round head electrodes

15 Lining material Neoprene /

16 Protection category IP 68 IS : 13947 Part (I)

17 Measuring accuracy ± 0.5% of measured

value inclusive of

linearity, repeatability,

pressure effect and

hysterics between 0.5 -

4 m/s velocity.

18 Coil Housing SS 304 with fully

welded construction /

cast steel with

anticorrosive epoxy

19 Connection / Junction Box SS

20 Earthing Grounding rings in SS

316 / Built in earthing

electrodes in SS

21 Fluid conductivity > 5  Siemens/cm

22 Marking Direction of flow with

arrow, size, Sr. no. &

(C) Flow Transmitter

1 Type Microprocessor based

of modular design

2 Display language English

3 Ambient temperature -20 C to + 600 C

4 Display Minimum 2 line back lit

indication of actual

flow rate, forward,

reverse, sum totalizers

5 Outputs One current output (4 –

20 mA) One scalable

pulse output One

6 Protection Category IP 67 IS:

7 Enclosure Die Cast Aluminum

with polyurethane

finish with glass

8 Programming Through key / keypad

on front fascia /optical

9 Power Supply 240 V AC, 50 Hz

Volume-II: Price Bid

10 Cable Gland ½” NPT (4 glands of

double compression

11 Mounting Wall mounted

12 Interface RS 485, based on EIA

R 422/485 standard, or

13 Power failure mode Provision of RAM /

parameter entered and

measured flow data

during power failure

14 Max. Separation Up to 200 meters

between sensor &

transmitter without any

signal boosters

15 Terminals Shock – hazard

protected push lock

16 Error Identification 0/3.6/22 m Amp

17 Interchangeability Fully interchangeable

with all sizes of flow

18 Safety classification General purpose

E) Flow Indicator and Integrator

1 Type Microprocessor based

2 Display Digital, seven segment

back lit LCD / LED

3 Flow Indicator Totalizes Internal 8 digit LCD

4 Digit Height 14 mm or Higher

5 No. of Digits for

Flow indicator 5 Digits

Flow integrator 8 Digits

6 Zero and span adjustment Required

7 Manual Reset Facility for Required (shall be key

flow integrator operated)

8 Engineering Units for

Flow rate indicator

Flow integrator in Ml

1 Prefabricated integral Required minimum

cables for connecting meters in single length

sensors and transmitter

Volume-II: Price Bid

Manually Operated Chain Pulley Block

Name of Pumping Station: Zinzuvada branch Canal Near Main canal

Sr. Particulars Unit Departmental Bidders' Data

No. Requirement

3 Type and Class of Chain Pulley Manually operated

4 Chain pulley block IS :

manufactured to

5 Safe working load MT

6 Proof Load MTs

7 Over load testing (Mechanical) 1.5 times the normal

load and as per IS:

8 Minimum working clearance

9 Distance from floor to top Mtr.

10 Maximum lift Mtr.

11 Type of hook As per IS: 15560 –

12 Height of hook above floor Mtr.

13 Drop of hook above floor level Mtr.

14 Section of runway Girder Mtr.

15 Type of main girder

16 Hoisting Chain Alloy Steel Material

(b) Construction

(c) Quality of Steel

(d) No. of Link

(e) Minimum Breaking Load kg

(f) Factor of safety

17 Net Weight MT