REPAIR TO PATH and CULVERTS OF CQA (ICV) and MES UNDER AGE (I) FY EDDUMAILARAM

Amount

Demolition of plain cement concrete of any description from any position including PCC floor, path, hard standing complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete

M&L for PCC 1:4:8, Type E-2 (using 40mm graded granite stone aggregate) 100mm thick, as in sub base for path / hardstanding etc complete all as specified.

M&L for Sand filling/ soil whenever required incl watering, ramming/ rolling and finishing to required size/shape etc n exc 25cm thick high from base all as specified as directed

M&L for 60mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thick M-35 Grade with grey cement and no pigment of any pattern as approved by GE and as per manufacture Instruction. complete all as specified as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete

Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles.

M & L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M & L preparation of steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc primer.

M&L for Cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed

M & L rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

Factory made PCC type A-1 chequered tiles, ISI marked (IS:13801), with grey cement & pigment, 25 mm thick, of size 200 mm x 200 mm, in floors, set and jointed with grey cement slurry, over & including 15 mm thick cement mortar (1:4) screed and 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate as backing complete, all as specified.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc,sweping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.

Bituminous primix semi dence asphaltic concrete 30mm consolidated thickness with 5.5% binding content by weight of total mix rolled and compacted to required camber and gra all as directed

M & L for Applying evenly a priming/tack coat with paving bituminous primer (with VG-10 Grade) at 5 kg per 10 sq metre complete all as specified and as directed

M & L for providing premix Bituminous macadam with mixed 4% paving bitumen of binder content of total weight of mix and by mechanical paver, rolled with 8 to 10 tonne power roller to required camber & gradient complete all as specified and as directed.

M/S K Rama Rao